Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Siemens LOGO! CIM
Summary of Contents for Siemens LOGO! CIM
- Page 1 LOGO! CIM Preface Application and functions Structure of the device Security LOGO! CIM Mounting and connecting the device Web-based configuration Operating Manual Dimension drawing Technical specifications Technical support 10/2021 A5E51250518-AA...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Preface
• CIM or device In this document, the term "CIM" or "device" is also used instead of the full product name "LOGO! CIM“. CIM is the abbreviation for Communication Interface Module. Use of the device Please observe notes marked as follows:... -
Page 4: Table Of Contents
Installing the Cellular module ..................... 36 4.3.5 Connecting the antenna ....................38 Web-based configuration ........................40 Security recommendations ....................40 Downloading and installing the certificate ................41 5.2.1 Overview ........................... 41 5.2.2 Installing the certificate for Windows ................. 42 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 5 System upgrade ......................... 77 Dimension drawing ..........................78 Technical specifications ........................79 Technical specification ....................... 79 Certificates and approvals ....................80 Technical support ..........................87 Service and support ......................87 Troubleshooting ........................ 87 Index ..............................90 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 6: Application And Functions
Universal Data Model (UDM) LOGO! BM and Modbus RTU compatible devices can map their process data to UDM. UDM acts as a data center for LOGO! CIM, and different protocols can exchange data through UDM. 4 ports switch CIM can work as a LAN switch. - Page 7 – Enable/disable map the position data to UDM • Time Server – LOGO! CIM can act as an NTP server to provide time for LOGO! BM or other NTP client. – LOGO! CIM can enable/disable mapping the time to the Universal Data Model (UDM).
-
Page 8: Requirements For Use
NTP, Cloud, HTTPS via cellular network Power supply You require a voltage source with a voltage between 12 VDC and 24 VDC that provides adequate voltage or current. For more information, refer to the section Technical specifications (Page 79). LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 9: Universal Data Model
UDM acts as a data center for LOGO! CIM, and different protocols can exchange data through UDM. Note UDM uses Little Endian to store its multi-byte type data. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 10 16 bit 0 ~ 65535 0-510 0-510 0-510 0-894 0-1022 double - 32 bit 0 ~ 4294967295 0-508 0-508 0-508 0-892 0-1020 unsigned (du) long-unsigned 64 bit 0-504 0-504 0-504 0-888 0-1016 (lu) 18446744073709551615 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 11 Longitude's degree /pi/rest/vsu926 Unit: degree short unsigned 1 byte Longitude's minute /pi/rest/vsu927 Unit: minute short unsigned 1 byte Longitude's second /pi/rest/vsu928 Unit: second real 4 bytes Longitude's degree in float format /pi/rest/vr929 Unit: degree LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 12: Accessories
Telit LE910C1-EU LTE CAT-1 mPCIe PCIe card) Telit LE910C1-AP LTE CAT-1 mPCIe Telit LE910C1-NF LTE CAT-1 mPCIe SIM7600G-H LTE CAT-4 mPCIe * SIM7600G-H LTE CAT-4 mPCIe is not certified to be used in hazardous locations. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 13: Application Example
We want to be informed with short message if the liquid level is abnormal. Setup We need a CIM to connect the onsite devices. The onsite devices can be LOGO! BM or Modbus RTU devices. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 14 8. Bind the event (Page 52) "abnormal liquid level" with an action "send message". Set the onsite device To setup the communication from CIM and the onsite device, refer to the documentation for onsite device and do the settings accordingly. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 15: Structure Of The Device
RESET button ② X80 (L+, M, FE) Power supply connector ③ ④ FE terminal for shield cable ⑤ X20 (FE, A, B, C, D, E) Mutiplex serial interface Top view ① Holes for RF antenna LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 16 Structure of the device 2.1 Appearance of the device Rear view ① Mounting slides ② Mounting interlock for DIN rail Bottom view ① 4 × RJ45 Ethernet 10/100 Mbps LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 17: Leds To Display Operation
No connection to Ethernet. mPCIe The cellular module is not detected. Flash The cellular module is initializing or registering. The cellular module has initialized and registered successfully. Flash The cellular module is receiving/sending data. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 18: The "Reset" Button
*SIM7600G-H LTE CAT-4 mPCIe is not certified to be used in hazardous locations. Card errors / diagnostics Card errors are indicated by the "mPCIe" LED. Inserting the card Inserting the SIM card is described in the section Installing the Cellular module (Page 36). LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 19: Security
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber threats. -
Page 20: Important Notes On Using The Device
IP 54 in accordance with IEC/EN 60079-0. • Transient protection shall be provided that is set at a level not exceeding 140 % of the peak rated voltage value at the supply terminals to the equipment. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 21 SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2 OR ZONE 2. WARNING When used in hazardous environments corresponding to Class I, Division 2 or Class I, Zone 2, the device must be installed in a cabinet or a suitable enclosure. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 22 LAN is considered to be in an "environment A" according to IEEE802.3 or "environment 0" according IEC TR 62102, respectively. Never make direct electrical connection to TNV-circuits (Telephone Network) or WAN (Wide Area Network). LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 23: Mounting And Connecting The Device
Mounting the device 4.1.1 Mounting position The installation should provide a dry environment for the LOGO! CIM. SELV/PELV circuits are considered to provide protection against electric shock in dry locations. The CIM installation dimensions are compliant with DIN 43880. CIM can be snap-mounted to 35 mm DIN rails according to EN 60715 or mounted on the wall with two M4 screws. - Page 24 Mounting and connecting the device 4.1 Mounting the device Installation position Installation position of the CIM Vertical installation of the CIM Horizontal installation of the CIM LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 25: Din Rail Mounting
To remove CIM, follow these steps: 1. Insert a screwdriver into the eyelet at the bottom of the slide interlock and move the latch downward. 2. Swing the LOGO! CIM off the DIN rail. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 26: Wall-Mounting
2. Feed the screws through the openings in the catches and secure the device to the wall. Note When you do not wall-mount LOGO! CIM, always keep the mounting slides in the factory default positions, that is, within the data area given in the illustration above; otherwise, the mounting slides may deform if they are exposed to hot and humid surroundings for a long term. -
Page 27: Connecting The Device
• Disconnect the device from the power supply in good time when a thunderstorm is approaching. • Do not touch mains cables and data transmission cables during a thunderstorm. • Keep an enough distance from electric cables, distributors, systems, etc. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 28: Connecting The Power Supply And Function Earth
(Page 79)". If there are voltage peaks on power supply lines, use a protective device in the form of a varistor (MOV) UMOV = U-rated x 1.2 (BLITZDUCTOR BVT AVD 24 (918 422) or compatible). LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 29 Is achieved efficiently by a connection to the DIN rail. Note Power supply unit of the CIM is not electrically isolated No electrical isolation means that the input and output circuits are not galvanically isolated. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 30: Connecting The Lan Interface
Take the following precautions: • Always disconnect the power plug and wait until the DIAG LED goes off before you open the device. • Close the device after every intervention. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 31 This can result in malfunctions and damage to the machine or plant. Take corresponding precautionary measures before you open the device. Exploded view ① Top housing ② Top PCBA ③ Middle housing ④ Bottom PCBA ⑤ Bottom housing LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 32 Press the marked recesses on both left and right sides of the module with a flat-blade screwdriver to loosen and then remove the middle housing. Open the top housing Pull the top housing in the marked direction to open the cover. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 33: Installing The Sma Connector
1. Press the marked recesses on both left and right sides of the module with a flat-blade screwdriver to loosen and then remove the middle housing. 2. Remove the shelter on the middle housing. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 34: Insert The Sim Card
If you are using the SIM card in a device installed in a system, you must observe the safety regulations for work on electrical systems. Carefully insert the SIM card into the card holder without applying excess force. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 35 1. Pull the top housing in the marked direction to open the cover. 2. Unlock the card holder in the marked direction. 3. Put the SIM card in the card holder and then lock the card holder in the marked direction. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 36: Installing The Cellular Module
To avoid getting burned, wait a while after switching off the power supply. Be very careful when opening the enclosure and removing the motherboard. Requirement • The device is disconnected from the power supply and the DIAG LED goes out. • A compatible cellular module (Page 18) LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 37 Arrange the feed lines and make them pass from the feeder cable path to prevent interruption. – Cable type: SMA to U.FL – Cable length: 7 to 8 cm 5. Close the top housing. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 38: Connecting The Antenna
The CIM has three antenna sockets of the type SMA for connecting the antennas. The antennas must have an impedance of approx. 50 Ω. Follow the operating instructions of the antennas used. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 39 Cylinder shaped antenna ANT 896-4ME for GSM (2G), UMTS 0AA0 (3G) and LTE (4G), ANT896-4ME 6GK5896-4MA00- IRC antenna ANT 896-4MA for GSM (2G), UMTS (3G) and 0AA3 LTE (4G),ANT896-4MA Antenna and antenna connecting cables LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 40: Web-Based Configuration
• Do not connect the device directly to the Internet. Operate the device within a protected network area. • Keep the firmware up to date. Check regularly for security updates of the firmware and use them. • Check regularly for new features on the Siemens Internet pages. – Network security information (https://new.siemens.com/global/en/products/automation/topic-areas/industrial- security.html) Physical access Restrict physical access to the device to qualified personnel. -
Page 41: Downloading And Installing The Certificate
Downloading and installing the certificate 5.2.1 Overview LOGO! CIM has a built-in Web-based configurator which enables you to configure the CIM functions from a PC. LOGO! CIM supports HTTPS for web server communication. You need to import the LOGO! Root certificate before using HTTPS to visit CIM with browsers. -
Page 42: Installing The Certificate For Windows
Import the certificate to Firefox If Firefox still cannot trust the certificate after you have installed the certificate, follow the instruction from Firefox to import the certificate to Firefox under the guidance of the system administrator. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 43: Installing The Certificate For Mac Os
6. Trust the certificate by clicking "Trust" and setting "Secure Sockets Layer (SSL)" as "Always trust". 7. Enter the password and confirm the modification. 5.2.4 Installing the certificate for Linux Follow the instruction from Linux to import the certificate under the guidance of the system administrator. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 44: Accessing Web-Based Configuration From Pc
If you do not desire to enter the user name and password again at the next logon, you can select the "②" check box. Make sure you do not set your browser to private mode, since your browser does not record any browsing history or passwords in this mode. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 45 – Apple Safari 12.1.2 and later versions – Firefox 67.0 and later versions – Google Chrome 63.0 and later versions • Linux – Firefox 67.0 and later versions – Google Chrome 63.0 and later versions LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 46: Web
Edit the variables, messages and bindings Protocol settings Set the communication protocols Cellular & GNSS View and set the cellular and GNSS Security settings Configure the security policy System settings Configure the system settings LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 47: Lan Settings
Display the device name. By clicking "Name", you can edit the CIM name. FW version Firmware version of CIM Boot version Boot version of CIM MLFB Order number Device IP IP of CIM Subnet Mask Mask of LAN IP Mac address Media Access Control Address LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 48: Contacts
4. Click "Save Changes" to save the change or click "Discard Changes" and "Confirm" to discard the change. Note If the message is referred by event, action or power on/off, the message cannot be edited or deleted. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 49: Data Management
Name: A variable name can contain letters, numbers and special characters. Data type: data type of the variable. Address type: UDM address type of variable Address: address in the CIM. 3. Repeat step 1-2 to add all variables you need. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 50: Messages
Delete a variable Click delete button next to the variable you want delete. 5.4.5.2 Messages This page allows you add or edit a message that CIM can send and receive. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 51 If the message is referred by an event or an action, the message cannot be changed or deleted. Change a message Click for you message you want to change, then enter the new name and message text. Delete a message Click for the message you want to delete. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 52: Data Binding
This page allows you to bind an event to an action. Refer to Universal Data Model (Page 9) for more information. Event is defined by you. An event can be variable change or receiving message. You can set an action CIM will take when the event you set happens. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 53 3. Configure the event, it can be change of a variable (Page 49) or receive Messages (Page 50) from a contact (Page 48). If there is no variable or message meet your requirement in the list, you can add variable or message on top of the list. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 54 – If the action is a variable change, you need to select a variable from the variable list and fill the new value in the input box below To. – If the action is sending a message, you need to select a message from the message list. 6. Enable the bind. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 55: Protocol Settings
This page allows you enable or disable the S7 connections, as well as check and edit the S7 connections. LOGO! CIM supports maximum four S7 connections simultaneously at most. CIM will share the connections if it acts as S7 server and S7 client at the same time. - Page 56 ③ Enable or disable the Dynamic server connection Note: LOGO! CIM support maximumly four S7 connections simultaneously. If you have set some static connections, the number of the dynamic server connections = 4 - the number of the static connections ④...
- Page 57 Here you configure the properties of the connections that CIM work as S7 server. • Remote IP: the IP of the client that you want to connect • Local TSAP: the TASP in LOGO! CIM is 00.01 to FF.FF • Remote TSAP: the TSAP of the client that you want to connect ⑦...
- Page 58 You can add maximum of 16 rows most. Data transfer restrictions The table below describes the range and local address restrictions for client connections. Read and Write requests: Local address (LOGO! CIM) Remote address (S7 compatible device) Address Type Range...
-
Page 59: Modbus Tcp
Modbus communication, as well as check the connection status. LOGO! CIM support maximum four Modbus TCP connections simultaneously at most. CIM will share the connections if it acts as a Modbus TCP server, Modbus TCP client at the same time. - Page 60 ③ Enable or disable the Dynamic server connection Note: LOGO! CIM support maximumly four Modbus TCP connections simultaneously. If you have set some static connections, the number of the dynamic server connections = 4 - the number of the static connections ④...
- Page 61 The default minimum transmit interval is 80 milli-second. 10.Save your changes and close the data transfer table. Data transfer restrictions The table below describes the range and local address restrictions for client connections. Local address (LOGO! CIM) Remote address (Modbus TCP com- patible device) Address Type...
-
Page 62: Modbus Rtu
5.4.6.4 Modbus RTU This page allows you enable, disable and set the Modbus RTU connection. LOGO! CIM supports only one Modbus RTU connection, either as Modbus RTU master or Modbus RTU slave. ① Enable or disable the Modbus RTU connection Note: Modbus RTU connection is not secure. - Page 63 9. To set the time interval that CIM synchronizes the data with the server, select the check box and input the specified time interval ⑨. The default minimum transmit interval is 80 milli-second. 10.Save your changes and close the data transfer table. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 64: Restful Api
Web-based configuration 5.4 Web pages Data transfer restrictions The table below describes the range and local address restrictions for client connections. Local address (LOGO! CIM) Remote address (Modbus RTU com- patible device) Address Type Range Address Type 0.0 to 511.7... - Page 65 16 bit -32768~32767 decimal -1234 double-int 32 bit -2147483648~2147483647 decimal -12345678 long-int 64 bit decimal -12345678 9223372036854775808~922337 2036854775807 real 32 bit -3.4E38 ~ +3.4E38 decimal 1234.5678 long-real 64 bit -1.797E308 ~ +1.797E308 decimal -1234.5678 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 66 A byte at 100 in range Q qb100 https://xxx.xxx.xxx.xxx:xxx/pi/rest/ A real at 100 in range Q qr100 https://xxx.xxx.xxx.xxx:xxx/pi/rest/ A real at [range start, 100] in range Q qr~100 https://xxx.xxx.xxx.xxx:xxx/pi/rest/ All reals at [(range_size-200), (range_size-100)] in qr-100~-200 range Q LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 67: Cellular And Gnss
Phone number of SIM Display the phone number of the SIM card card Signal strength Display the level of signal strength Cellular data Enabled / Disabled Network register Network register status status IPv4 IPv4 address LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 68: Cellular Settings
This page allows you to set APN, Dial number and SMS Center number. You can get the APN, Dial number and SMS number from the SIM card provider. Note Siemens recommends only set these items when it is necessary. Cellular settings You can enable or disable the "Cellular data " in this field. -
Page 69: Gnss Settings
RESTful API has no authentication RESTful API is not safe. If you enabled the RESTful API, a device can connect to CIM by Restful API without authentication. Only enable the RESTful API when needed. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 70: Certificates
(Page 41) before using the Web-based configuration. Note Siemens recommends you clear browser cache and restart the browser after you installed the certificate. It takes about one minute for the certificate to take effect. Wait one minute before logging in the web-based configuration after you installed the certificate. - Page 71 1. Select CIM internal certificate by selecting the check box next to it. 2. Click "Generate" to generate CIM CA. 3. Click "Download" to download CIM CA. 4. Click "Save Changes" to save the change or click "Discard Changes" to discard the change. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 72 2. Drag and drop or select your own CA and key to the target filed in the page. 3. Click "Import" to import the CA and key to CIM. 4. Click "Save Changes" to save the change or click "Discard Changes" to discard the change. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 73: System Settings
The page may be stuck for a few seconds during the certificate generation. Note If the time of CIM and PC is different more than 1 year, you will get a notice that you certificate is invalid. Set the time in web-based configuration for CIM. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 74 This function allows you to set an automatic conversion of the summer and winter time for the CIM clock: When you enable summer/winter time conversion, you can specify a country-specific time conversion: • EU: EU1, EU2 • UK: United Kingdom of Great Britain and Northern Ireland LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 75: Power On/Off Sms
If you didn't change the password, you can log on with the default password "cim". Siemens strongly recommend you change your default password after you first login CIM. If you forget the password, you need to reset the CIM to factory setting (Page 18) and log on with the default password. -
Page 76: System Configuration Management
Web-based configuration 5.4 Web pages Factory reset When you press the "Factory Reset" button, web-based configuration reset the connected LOGO! CIM to factory setting. Note Before factory reset, backup the configuration data through the path System Setting --> System Configuration Management. -
Page 77: System Upgrade
(https://support.industry.siemens.com/cs/start?lc=en-US). Upgrade the firmware Note • Upgrade firmware will not change any configuration. However, Siemens recommends you backup configuration data through the path System Setting --> System Configuration Management before the upgrading. • In the upgrade environment, other functions of the system are stopped, such as network communication, data bindings and so on. -
Page 78: Dimension Drawing
Dimension drawing All dimensions in millimeters LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... -
Page 79: Technical Specifications
Technical specifications Technical specification Technical specifications - LOGO! CIM Article numbers LOGO! CIM 6ED1055-5MC08-0BA1 Attachment to Industrial Ethernet Interface X1P1-P4 for local applications Quantity Design RJ-45 jack Properties 10/100-Base-T, autocrossover, autonegotiation Transmission speed 10 / 100 Mbps Permitted cable lengths (Ethernet) (Alternative combinations per length range) * 0 ... -
Page 80: Certificates And Approvals
The following shows the approvals that may be available. For the device itself, it is certificated as shown on the product label and package label. ISO 9001 certificate The Siemens quality management system for all production processes (Development, Production, Sales and Service of Automation Products, -Systems and -Solutions) meets the requirements of ISO 9001:2015 This has been certified by DQS (the German society for the certification of quality management systems). - Page 81 • 2011/65/EU (RoHS directive) Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Standard LOGO! CIM EN 60079-0 EN 60079-7 EN IEC 63000...
- Page 82 Avis Canadian Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Responsible party for Supplier's Declaration of Conformity Siemens Industry, Inc. Digital Factory - Factory Automation 5300 Triangle Parkway, Suite 100 Norcross, GA 30092 Mail to: (amps.automation@siemens.com)
- Page 83 WARNING – Explosion Hazard – Do not disconnect while circuit is live unless area is known to be non-hazardous. • WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2 or Zone 2. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 84 2 Hazardous Locations. ATEX The LOGO! CIM meets the requirements of the EC directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres". Applied standards: • EN IEC 60079-0:2018 Hazardous areas - Part 0: Equipment - General requirements •...
- Page 85 • ABS American Bureau of Shipping (USA) • BV Bureau Vertias (France) • DNV GL (Norway/Germany) • LR (Lloyds Register of Shipping) • KR (Korea Register of Shipping) • Class NK Nippon Kaiji Kyokai (Japan) • China Classification Society (CCS) LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 86 You can fully recycle LOGO! devices due to their low-pollutant equipment. For environmentally friendly recycling and disposal of your old equipment, contact a certified electronic waste disposal company and dispose of the equipment according to the applicable regulations in your country. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 87: Technical Support
Please check regularly if updates and hotfixes are available for download to your device. The download area is available on the Internet at the following link: After Sales Information (https://support.industry.siemens.com/) Troubleshooting This chapter provides you with tips on how to locate and/or troubleshoot problems. - Page 88 Network quality is poor. The SIM card account is in Top up the account. Note: If SIM card is in arrears, arrears. and you still cannot access to internet after topping up, restart the cellular module. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
- Page 89 • There are too many cache files in the • Clear the cache files of the browser. pages. browser. • You get a load fail when open- ing the web- based configura- tion page. LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...
-
Page 90: Index
Device, 32 Data Management Open the device, 32 Event, 52 Datamanagement Data Binding, 52 Device information, 47 Device restart, 75 Password, 75 Power on/off, 75 Power supply Connecting, 28 Factory Mutual Research (FM), 83 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA... - Page 91 Index RCM, 85 RCM Australia/New Zealand, 85 RESTful API, 64 S7, 55 SIM card, 34 Summer/Winter Time, 74 Sync Time, 74 Time setting, 74 UL, 82 Universal Data Model (UDM), 9 Variables, 49 LOGO! CIM Operating Manual, 10/2021, A5E51250518-AA...