Page 1
Hood User manual HCP61310X 01M-8861743200-0121-01...
Page 2
Please read this guide first! Dear Customer, Thank you for choosing a BEKO product. We would like you to achieve the optimal effi- ciency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference.
CONTENTS 1 Important safety and environment instructions 1.1 General safety ..... . .4 1.2 Compliance with WEEE Directive and disposing of the waste product ...6 1.3 Compliance with RoHS Directive .
Children shall not be allowed play with the • structions shall void any warranty. appliance. Cleaning and user maintenance Beko products comply with the applicable shall not be made by children without su- • safety standards; therefore, in case of any pervision.
Page 5
Important safety and environmental instructions Place the appliance in a way so that the Do not operate the product without the fil- • • plug is always accessible. ter and do not remove the filters while the product is running. Do not touch the lamps if they have oper- •...
Important safety and environmental instructions ficient when the hood for electric hob is in recovering and recycling of old appliance. used simultaneously with the devices op- Appropriate disposal of used appliance helps erating on gas or other fuels (this may not prevent potential negative consequences for apply to appliances that only discharge the the environment and human health.
Operation of the Appliance 3.1 Controlling the Appliance To turn off the lamp, set the lamp switch ( ) to '0' position. To turn on the lamp, set the lamp switch ( ) to '1' position. To turn off the motor, set the motor switch ( ) to '0' position.
Operation of the Appliance 3.4 Replacement of Lamp 3.5 Operation with Flue Connection Make the electrical connections of the ap- pliance. Your appliance is equipped with a 3 Vapour is extracted through • W spot LED lamp. For replacing the lamps, the flue duct, which is fastened push downwards on the holder from its be- to the connection head on the...
Cleaning and Maintenance 4.2 Replacement of Carbon Before cleaning and mainte- Filters nance, unplug the appliance or turn off the switch. Odour removing filters contain charcoal (Active carbon). Aluminium grease filters 4.1 Cleaning of Aluminium must be installed in the product, regardless of Grease Filters whether or not charcoal filters are used.
Installation Of Appliance WARNING! Before installation, read safety information in the User Manual WARNING! Failure to install with screws and stabilizers in accordance with these instructions may result in electric shock. For the installation of the hood, please contact the nearest Authorized Service. It is the customer's responsibility to prepare the location and electrical installation of the hood.
Page 12
Installation Of Appliance 12 / EN Cooker Hood / User Manual...
Troubleshooting Troubleshooting Root Cause Help Appliance is not Check your fuses. Fuse may be blown, inspect working. and restore it. Appliance is not Check the electrical connection. Mains voltage shall be between working. 220 and 240 V. Appliance is not Check the electrical connection.