Page 1
Display and operating AZL66… units AZL66 display and operating units are used in connection with the LMV6 burner management system directly on the burner or in control cabinets within the burner's immediate vicinity. AZL66 units are used for the display, operation, and parameterization of specific safety-related and non-safety-related burner functions.
Page 2
Use / Features The description that follows reflects the maximum functional scope of the AZL66. The actual functions and the principle of operation are to be determined based on the LMV6. Housing in a modern design featuring recycled plastic ...
Page 3
LMV6 and AZL66 as per DIN EN 60529. Failure to observe this information poses a risk of damaging the safety functions and a risk of electric shock Siemens does not assume responsibility for damage resulting from unauthorized interventions. Electromagnetic emissions must be checked on an application-specific basis! Qualified personnel Only qualified personnel are allowed to start up and operate the AZL66.
Page 4
Mounting notes Ensure that the relevant national safety regulations and notes on standards are complied with Please note that the mounting surface must be completely flat The AZL66 must be used in a dry and clean environment ...
Page 5
Operating philosophy / Display philosophy The operating philosophy and display philosophy can be found in the relevant user manuals for the LMV6. All unit versions of the AZL66 function and are operated in the same way. Graphics Function Function Navigate through tile views or list views ...
Page 6
Meaning of symbols on the display Tile Meaning Changing parameters Entering burner-specific parameters Adaptation of programs and/or components/accessories to the LMV6 and adaptation of the LMV6 to its components/accessories. Central repository of all relevant parameters for commissioning Maintenance prompt message. Maintenance is carried out at regular intervals by trained specialist personnel.
Page 7
Installation notes AGG6.635 signal cable from the LMV6 to the AZL66. The AGG6.635 signal cable is specified for use under the burner hood. If other signal cables are used, there is no guarantee that the required cable features will be available. ...
Page 8
ISO 9001:2015 ISO 14001:2015 OHSAS 18001:2007 China RoHS Hazardous substances table: http://www.siemens.com/download?A6V10883536 Disposal notes The AZL66 contains electrical and electronic components and must not be disposed of together with domestic waste. Local and currently valid legislation must be complied with.
Page 9
Open Source Software (OSS) declaration Due to the license terms of the software we use, Siemens AG wishes to note that the OEM is obligated to provide the following license text for the end user in the documentation: Open Source Software (OSS) declaration Embedded in –...
Page 10
Type summary Type AZL66.00A8 Article no. S55629-H301-A100 Functions ● Graphic display (4.3" TFT with 480 x 272 pixels) ● Parameter-setting functions and display functions ● Saving of fault histories and error histories ● Reset ● Burner rapid shutdown using button combinations ●...
Page 11
24 V DC 2 Brown CANH Yellow 0.25 CANL Green 0.25 The permissible cable length is specified in the data sheet for the LMV6. Inputs/outputs CAN interface with RAST3.81 jack To Siemens LMV6 burner management system 11/14 Smart Infrastructure CC1N7562en 12/20/2019...
Page 12
Technical data (continued) Environmental Storage DIN EN 60721-3-1 Climatic conditions Class 1K3 conditions Mechanical conditions Class 1M2 Temperature range -20 to +60°C Humidity < 95% r.h. Transport DIN EN 60721-3-2 Climatic conditions Class 2K3 Mechanical conditions Class 2M2 Temperature range -20 to +60°C Humidity <...
Page 13
Connection diagram Example: Basic diagram of AZL66 with LMV6 Connection, AZL66 to LMV6 13/14 Smart Infrastructure CC1N7562en 12/20/2019...
Page 14
Dimensions Dimensions in mm AZL66 22,1 46,1 119,2 90,1 M1:2 2019 Siemens AG Smart Infrastructure, Berliner Ring 23, 76437 Rastatt, Germany Subject to change! 14/14 Smart Infrastructure CC1N7562en 12/20/2019...