Page 1
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms Hub 500 Hardware Deployment Guide for all UC Platforms Version 0.1 07/19/2019 Note: This guide covers general hardware deployment steps, and is a companion to the “Hub 500 Configuration Guide your Unified Communication platform”. Visit http://www.support.lenovo.com...
The Lenovo ThinkSmart Hub 500 is an all-in-one (compute/PC + microphones + speakers + control) device purpose-built for Meeting Room collaboration. Its design features an 11.6” touch panel capable of rotating 360 degrees. With the ThinkSmart Hub 500, the only other hardware needed is a USB camera and HDMI connected display.
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms Backplane – Ports Integrated Touch Display The Hub 500 features an 11.6” touch display that is permanently affixed to the base, but it can rotate 360 degrees so that anyone around the table can control the meeting. This touch display is the control panel where meetings are started, participants are managed and the Hub is configured.
USB Camera USB 3.0 UC Platform compliant Customer provided camera What’s Inside the Box One Lenovo Hub 500 factory installed with Windows 10 IoT and Microsoft Teams Rooms or Zoom Room software One Lenovo Power Adapter User guide Setup Remove the Hub 500 from its packaging and place it on a flat surface...
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms Cable Management The ThinkSmart Hub 500 delivers a custom cable management solution designed to keep all connected cables securely in place. On the back of the device, under a secured the door, there are two locking arms.
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms 3. Connect a USB camera into any of the 4 USB ports Insert USB Camera cable Connect External HDMI Display(s) The Hub 500 has two HDMI OUT ports that can drive two external displays at 1920x1080 (HD) resolution.
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms Secure Larger Cable Management Arm 7. Push down on the main arm until it clicks. Note that up to 40lbs of force may be required to close completely. Connect HDMI ingest (Screen Presentation) cable The HDMI ingest cable will attach to the backplane of the Hub 500 on one end, while the other end will sit atop the table.
11. Power on the Hub 500 by pressing the button on edge of device. Configure ThinkSmart Hub 500 To complete installation of your ThinkSmart Hub 500, please refer to the companion document, “Hub 500 Configuration Guide for your Unified Communication Platform”.
ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms Version History Date Version Comments 7/19/2019 v 0.1 First version that reflects Hardware Deployment guide (common • across UC) separated from Configuration guide (specific for each Deployment = “Hub 500 Hardware Deployment Guide”...