Please read and comply with Environmental protection these original instructions prior to the initial operation of your appliance and The packaging material can be store them for later use or subsequent own- recycled. Please do not throw ers. the packaging material into –...
Device elements Dry vacuum cleaning 1 Electrodes – When vacuuming up fine dust, a dis- 2 Suction hose posal bag or a membrane filter (optional 3 Air outlet, working air accessory) can additionally be used. 4 Suction head lock Installing the dust disposal bag 5 Air inlet, motor cooling air Illustration 6 Suction head...
Remove the membrane filter Adjust the suction output Illustration Set the suction output (min - max) at the Release and remove the suction head. rotary switch. Remove the membrane filter. Working with electrical power tools Insert and lock the suction head. –...
Note: The automatic filter dedusting func- Care and maintenance tion can only be switched on/ off when the appliance is switched on. DANGER – To switch off automatic filter cleaning: First pull out the plug from the mains before Activate the switch. Indicator lamp in carrying out any tasks on the machine.
– For additional information about spare the flat fold filter. parts, please go to the Service section Replace the flat pleated filter. at www.husqvarna.com. Automatic shut-off (wet vacuum cleaning) does not react Clean the electrodes as well as the space between the electrodes with a brush.
EN 61000–3–3: 2013 EN 62233: 2008 EN 50581 Applied national standards Helena Grubb Vice President, Construction Equipment Husqvarna AB (Authorized representative for Husqvarna AB and responsible for technical documen- tation) Husqvarna AB SE-433 81 Göteborg Sweden tel: +46-31-949000 Gothenburg, 01.03.2014...