hit counter code
Download
Share
Print this page
Cisco WAP125 Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. WAP125
  6. Manual

Cisco WAP125 Manual

Reboot and reset to factory default settings
Hide thumbs Also See for WAP125:

Advertisement

Quick Links

Download this manual
Reboot and Reset the WAP125 and WAP581
to Factory Default Settings
Objective
Rebooting or restarting the Wireless Access Point (WAP) deletes the logs stored in the
volatile memory. This process is performed when certain changes in the settings need a
reboot or if the WAP is not responding or booting up properly. Resetting the WAP to factory
default settings, on the other hand, erases all configurations that have been set by the user,
and restores the device to its original settings. A reset is recommended if most of the WAP
settings need to be reconfigured.
This article aims to show you how to reboot and reset your WAP125 or WAP581 to factory
default settings.
Applicable Devices
WAP125
WAP581
Software Version
WAP125 - 1.0.0.3
WAP581 - 1.0.0.4
Reboot the Wireless Access Point
There are two ways to reboot the WAP:
Hardware reboot
Reboot through the web-based utility
Hardware Reboot
You have two ways to reboot the device hardware:
Turn the device off by pressing the POWER button while the device is connected to the power
outlet.

Advertisement

loading

Related Manuals for Cisco WAP125

Summary of Contents for Cisco WAP125

  • Page 1 A reset is recommended if most of the WAP settings need to be reconfigured. This article aims to show you how to reboot and reset your WAP125 or WAP581 to factory default settings.
  • Page 2 Press the Reset button for about three seconds only, or until the lights go off. Note: In both above images, the WAP125 is pictured. Reboot through the Web-based Utility Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.
  • Page 3 Step 2. Click the Reboot button. Step 3. Click OK in the confirmation window.
  • Page 4 You should now have rebooted your device. Schedule a Reboot Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot. Step 2. Check the Enable Schedule Reboot check box to configure the schedule settings. Step 3.
  • Page 5 WAP should reboot. The options are: Date — Set the specific date and time a reboot should occur. In — Set the reboot to occur from the time the function was configured. If this is chosen, skip Step Note: In this example, Date is chosen. Step 4.
  • Page 6 Step 5. In the Time area, choose the hour and minute from the respective drop-down list. The time format is in Military format. Note: In this example, the WAP is scheduled to reboot at 3:21am on June 7, 2017. Step 6. (Optional) If In was chosen in Step 3, from the Days drop-down list, choose the number of days from today that the WAP should reboot.
  • Page 7 Step 8. (Optional) From the Minutes drop-down list, choose the minute in the hour for the WAP to reboot. Note: In this example, 0 is chosen. Step 9. Click Save. You should now have successfully configured a schedule for the WAP to reboot. Reset the Wireless Access Point There are two ways to reset the WAP to factory default settings: Hardware reset...
  • Page 8 Step 1. Press the Reset button for more than 10 seconds until the lights go off. Step 2. Release the Reset button when the lights turn back on. Note: In both above images, the WAP125 is pictured. Reset through the Web-based Utility...
  • Page 9 Step 2. Check the Restore to Factory Default Settings check box. Step 3. Click the Reboot button.
  • Page 10 Step 4. Click OK in the confirmation window. You should now have reset your device to factory default settings.

This manual is also suitable for:

Wap581