Page 1
Operating instructions Dishwasher To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. en-AU, NZ HG07-W M.-Nr.
Activating the safety lock ..................22 Miele@home ......................23 Standard settings ....................24 Setting the language ..................24 Setting up Miele@home ................. 24 Setting the time of day ................... 25 Setting the water hardness ................25 Activating AutoDos..................26 Dishwasher salt ....................27 Filling the salt reservoir...................
Page 4
Contents Detergents ......................51 Types of detergents .................... 51 Detergent dispensing ..................52 Automatic dispensing/AutoDos................53 Activating AutoDos..................53 Inserting a PowerDisk..................54 Manual detergent dispensing ................56 Detergent dispensing ..................56 Adding detergent.................... 56 Operation......................58 Switching on the dishwasher ................58 Selecting a programme ..................
Page 5
Service........................ 98 Contact in case of fault ..................98 Warranty ......................98 Optional accessories ..................99 Installation......................101 The Miele Waterproof system................101 Water intake ......................101 Drainage ......................103 Electrical connection ................... 105 Technical data....................106 Settings ......................108 Opening the Settings menu.................
"Installation" and in "Warning and Safety instructions". Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 8
Warning and Safety instructions Correct application This appliance is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts, and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed &...
Page 9
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the dishwasher if its operation has been clearly explained to them and they are able to use it safely. They must be able to understand and recognise the possible dangers of misuse.
Page 10
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorised technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher, check it for any visible damage. Never use a damaged dishwasher.
Page 11
Warning and Safety instructions Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency and voltage) match the electricity supply to prevent damage to the dishwasher. Compare these before connecting the appliance to the mains electricity. If in any doubt, consult a qualified electrician.
Page 12
If the mains connection cable is damaged, it must be replaced with a special cable of the same type (available from Miele) by a Miele authorised service technician only in order to avoid a hazard.
Page 13
This special lamp must only be used for the purpose for which it is intended. It is not suitable for room lighting. Replacement lamps may only be installed by a Miele authorised technician. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times.
Page 14
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact Miele customer service. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 15
Warning and Safety instructions Do not use any commercial or industrial detergents. These may cause material damage, and there is a risk of a severe explosive chemical reaction (such as an explosive oxyhydrogen gas reaction). Do not fill the rinse aid reservoir with powder or liquid detergent. This will cause serious damage to the rinse aid reservoir.
Warning and Safety instructions Accessories Only use original Miele accessories. Using spare parts or accessories from other manufacturers will invalidate the warranty, and Miele cannot accept liability. Transport Only transport the dishwasher in an upright position so that no water flows into the electrical controls, as this would cause faults.
Guide to the appliance Overview a Upper spray arm (not visible) h Salt reservoir b 3D MultiFlex tray i Data plate c Upper basket j Rinse aid reservoir d Middle spray arm k Detergent compartment e Aeration valve l AutoDos detergent outlet f Lower spray arm m AutoDos (automatic dispensing) g Filter combination...
Guide to the appliance Control panel a Programme selection h OK sensor For selecting menu options and ECO 50 °C = ECO 50 °C values displayed. Auto = Auto 45–65 °C For confirming messages. 45 °C = Gentle 45 °C i sensors 65 °C = QuickPowerWash 65 °C For programme selection. For changing the values displayed.
Guide to the appliance The OK sensor is used to confirm a Display functions message or setting and also to move to The display is used to select or set the the next menu or another level. following: Under Further programmes/Settings - further programmes a scroll bar ...
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
Using for the first time At the end of the programme, if the Every dishwasher is tested at the AutoOpen function is on, the door factory. There will be residual water in locking pins automatically retract. the machine from this test. It is not an indication that the dishwasher has To prevent a technical fault, do not been used previously.
Using for the first time Closing the door Activating the safety lock Push the baskets right in. Use the safety lock to prevent children opening the dishwasher door. The door Raise the door upwards until the can then only be opened by using a lot catch engages.
- a Wi-Fi network failures. Therefore, a constant availability of featured functions cannot - the Miele@mobile App be guaranteed. - a Miele user account. The user account can be created via the Miele@home availability Miele@mobile App. The ability to use the Miele@mobile App...
Set up Miele@home will Switching on the dishwasher appear in the display. Switch the dishwasher on using the To set up Miele@home now, confirm sensor. by touching OK. The welcome screen will appear when Useful tip: To postpone setup until the dishwasher is switched on and the later, select the option ...
Using for the first time Setting the time of day Setting the water hardness The display will change to the screen The time is updated automatically if a for setting the water hardness. connection is established to the Wi-Fi network. - The dishwasher needs to be programmed to the correct water The display will then change to the...
Using for the first time Activating AutoDos Finally, prompts will appear in the display. The display changes to the settings screen for AutoDos (see “Detergents - After confirming these prompts with Automatic dispensing/AutoDos”). OK, the messages Refill salt may appear.
Using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning (5 °dH - German scale) you do not results, the dishwasher needs to need to add dishwasher salt.
Using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 litres of water to enable the salt to dissolve. Once the dishwasher has been used, there is always sufficient water in the salt reservoir.
Using for the first time Replenishing salt After the salt reservoir has been filled, the refill reminder may still appear in the When Refill salt appears in the display if the salt concentration has not display wait until the end of the yet reached the correct level.
Using for the first time Rinse aid If you only ever use combination detergent products in your Rinse aid is necessary to ensure water dishwasher, you do not need to fill does not cling to and leave marks on the rinse aid reservoir. crockery during the drying phase, and it However, the best rinsing and drying helps crockery dry faster after it has...
Using for the first time Wipe up any spilled rinse aid. This Adding rinse aid prevents over-foaming occurring during the next programme. You can adjust the rinse aid dosage for best results (see "Settings - Rinse aid"). Refilling rinse aid When the ...
Caring for the environment - If you are manually dosing the Economical dishwashing detergent, reduce the amount of This dishwasher is exceptionally detergent by when using powder economical in its use of water and or liquid detergent if the baskets are electricity.
Caring for the environment The estimated consumption function is EcoFeedback consumption activated as standard. It can be display deactivated, if preferred (see “Settings - The "Consumption" function is used for Consumption (EcoFeedback)”). calling up information about the energy and water consumption of your 2.
Loading the dishwasher - The spray arms must not be blocked General information by items that are too tall or hang Remove coarse food residues from through the baskets. Test for free crockery. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 35
Loading the dishwasher Items not suitable for washing in the Damage due to caustic alkaline dishwasher: detergents. - Wooden cutlery and crockery or Aluminium parts (e.g. the grease items with wooden parts. These may filters of rangehoods) can be discolour and fade.
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls, and flat See “Loading the dishwasher - dishes on the FlexCare cup rack. Loading examples” for examples of Glasses can be arranged along the cup how to load crockery and cutlery.
Page 37
Loading the dishwasher Adjusting the FlexCare cup rack Loading the silicone elements of the FlexCare cup rack You can set the height and depth of the cup rack at two different levels so that it The silicone elements on the cup rack can accommodate larger cups and so are specially designed to hold tall that taller items can be placed...
Page 38
Loading the dishwasher Lowering the spikes You can fold down every second spike in the two front right hand rows of spikes to make it easier to arrange larger pieces of crockery, e.g. cereal bowls. Press the yellow lever downwards , and then lower the dark gray spikes .
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Pull the basket up until it clicks into In order to gain more space for taller place. items, the upper basket can be adjusted on three levels with 2 cm To lower the upper basket: between each level.
Loading the dishwasher Loading the MultiComfort area Lower basket The rear section of the lower basket is See “Loading the dishwasher - used for washing cups, glasses, plates, Loading examples” for examples of and saucepans. how to load crockery and cutlery. Loading the lower basket ...
Page 41
Loading the dishwasher Lowering the spikes Loading the FlexCare glass holder The rows of spikes at the front are used The silicone elements in the glass for loading plates, soup bowls, platters, holder provide a stable and secure hold dessert bowls and saucers. for delicate stemware.
Loading the dishwasher You can push the left insert to the Cutlery tray middle in order to accommodate tall See “Loading the dishwasher - items of crockery and long stemmed Loading examples” for examples of glasses in the upper basket (see “Upper how to load crockery and cutlery.
Comparison tests Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme (for energy label): 14 place settings Capacity: Detergent amount: 27.5 g Rinse aid dosage: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid" section of this booklet.
Page 48
Comparison tests Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme (for energy label): 15 place settings Capacity: Detergent amount: 33.7 g Rinse aid dosage: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid" section of this booklet.
Detergents There are different types of detergents: Types of detergents - Powder and liquid gel detergents. Damage due to unsuitable These detergents allow you to adjust detergents. the amount dispensed according to Detergents that are not suitable for the size of the load and the level of domestic dishwashers can cause soiling.
Detergents Detergent dispensing Risk of chemical burns from detergent. There are two ways of dispensing the Dishwasher detergents can cause detergent. burning on the skin and in the eyes, During automatic dispensing, the nose, mouth, and throat. AutoDos function will automatically Avoid contact with detergents.
Insert a PowerDisk (see “Automatic dispensing/AutoDos - Inserting a PowerDisks are available to order PowerDisk“). directly from the Miele online store or a Miele Experience Centre. The AutoDos function will be activated automatically. Risk of chemical burns from...
Detergents Inserting a PowerDisk Switch on the dishwasher before you replace the PowerDisk so that the dishwasher recognises it. When the message PowerDisk almost empty appears, the reservoir contains sufficient detergent for another 2–3 programmes only. Only replace the PowerDisk when the message ...
Page 55
Detergents The detergent powder must be dry so that it does not clump together. Do not fill the AutoDos with any type of liquid. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed (see “Cleaning and care - Cleaning the AutoDos”).
Detergents Adding detergent Manual detergent dispensing Detergent must be manually dispensed if you have deactivated automatic dispensing with the AutoDos sensor. Detergent dispensing The detergent compartment holds a maximum of 50 ml. There are marks in the detergent compartment to aid with dispensing: 20, 30, max.
Page 57
Detergents The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment. Automatic dispensing/AutoDos should be deactivated if detergent is manually dispensed. ...
Operation Switching on the dishwasher Selecting a programme Make sure the spray arms can rotate Choose your programme according to freely. the type of crockery and the degree of soiling. Close the door. The different programmes and their use ...
Operation Display of programme duration Starting a programme If necessary, confirm the previously The estimated duration of the selected programme appears in the display displayed message with OK. before the programme begins. During Touch the Start sensor. the programme, the time left until the end of the programme is displayed.
Operation At the end of the programme Energy management The signal tones may sound at the end To save energy, the dishwasher will of the programme. switch off automatically 10 minutes after the last time a sensor is pressed or The programme has finished when the after the end of a programme.
Operation Switching off the dishwasher Unloading the dishwasher The dishwasher can be switched off Dishes tend to break and chip more at any time using the sensor. easily when they are hot. Allow the dishes to cool until they are comfortable ...
Operation Interrupting a programme Cancelling or changing a programme A programme will be interrupted as soon as the door is opened. If a programme is cancelled, If the door is closed again, the important programme stages may be programme will continue from the point missed.
To switch the display back on for a few minutes, press the sensor. You can also activate the timer via the Miele@mobile App.
Page 64
Options Setting “Start at” Setting “Finish at” With the Start at function, you set the Use the Finish at function to set the exact time at which you want the latest time by which the selected programme to start. programme has to be finished. ...
Page 65
Options Setting EcoStart Setting SmartStart EcoStart function enables you to SmartStart function (only functional benefit from time variable economy in selected countries) is used for electricity rates. Before you can use this starting your dishwasher automatically option, you need to set up to three at a time when energy costs are most electricity rate tariff times (see “Settings economical.
Page 66
sensor will go out and switch the dishwasher off. the Start sensor will light up. Switching the dishwasher off while a timer is running stops the timer. You can also change the time set for the timer or delete it using the Miele@mobile App.
You can start your dishwasher remotely using the sensor. The option will also using the Miele@mobile App. To do this, remain active if you switch the you first need to install the app on your...
Programme chart Crockery Food deposits Programme features Temperature-sensitive dishes, Lightly dried-on food deposits Programme with glass care glasses and plastics All fresh to dried-on food Variable, deposits sensor-controlled programme Short programme taking Mixed crockery Lightly dried-on food deposits less than an hour Standard dried-on normal Water and food deposits...
Page 69
Programme chart Programme Consumption estimate Energy consumption Water consumption Gentle 45 °C Programme duration Energy consumption Auto 45–65 °C Water consumption Programme duration Energy consumption Water consumption QuickPowerWash 65 °C Programme duration Energy consumption Water consumption ECO 50 °C Programme duration Energy consumption Water consumption Intensive 75 °C ...
Page 70
Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C ECO 50 °C Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment to load size and level of soiling 55–65 55–70 required Gentle 45 °C 55–70 ...
Page 71
Programme chart Consumption Electricity Water Time Cold water Hot water Litres Cold water Hot water h:min h:min 0.51 / 0.54 0.34 / 0.36 9.2 / 9.6 3:48 / 3:45 3:47 / 3:42 2:05–3:35 1:57–3:21 0.75–1.05 0.45–0.55 6.0–13.0 0.90 0.40 13.0 2:44 2:28 1.20...
Programme chart Maintenance programme Further programmes The dishwasher wash cabinet is PowerWash 60 °C generally self-cleaning. However, if Programme for cleaning a mixed load residues or deposits occur, use the with fresh food deposits which have Maintenance prog. programme to clean begun to dry on. it.
Programme options IntenseZone Selecting programme options The IntenseZone programme option You can use programme options to increases cleaning performance in the adjust the programmes. lower basket. To do this, you can select or deselect Energy consumption increases due to the programme options before starting the extended wash duration in the lower the programme.
All surfaces of this appliance are packaging. susceptible to scratching. Contact Miele cleaning and care products are with unsuitable cleaning agents can available to order from a Miele alter or discolour all surfaces. Experience Centre or the Miele online Only use cleaning agents formulated shop.
A clean, damp microfibre cloth (such sponges which have been previously as the Original Miele all purpose used with abrasive cleaning agents microfibre cloth) without detergent - dirt eraser sponges can also be used.
Cleaning and care Slide the yellow catch of the AutoDos Cleaning the AutoDos lid to and open the lid. You should check that the detergent Remove the PowerDisk if applicable. chute is clean every time you replace the PowerDisk, and clean it if necessary.
Page 77
Cleaning and care Clean the detergent chute with water The AutoDos lid must close tightly so and a soft brush if necessary. that the detergent powder does not get wet and clump together. It is very important that no moisture Make sure that all seals are clean.
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected regularly (approx. every 2–4 months). Damage due to soiling entering the circulation system. Without filters, soiling can enter the circulation system and cause a blockage.
Page 79
Cleaning and care Cleaning the spray arms Refitting the spray arms Refit the upper and middle spray arms. Refit the lower spray arm and ensure that the filter combination lies flat in the base of the wash cabinet. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling “Cleaning and care - Cleaning the from the suds solution.
Page 81
Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter downwards until the arrow in the viewing window and away from the filter combination. points to the lock symbol . ...
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock. The plastic housing of the water connection contains an electrical valve.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 84
Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Restart the desired programme. If the fault message appears again, there is a technical fault. Switch the dishwasher off. Turn off the tap. Call Miele. Waterproof The Waterproof system has reacted. Switch the dishwasher off.
Open the door manually (see “Using for the first time – Opening the door”) and switch the dishwasher back on. If the same fault message appears again, call Miele. The door locking pins do not retract after the door is opened. There may be a technical fault.
Fault F18 A technical fault has occurred. Switch the dishwasher off. Turn off the tap. Call Miele. The following fault The intake water has not reached the required message appears in the temperature of 45 °C (see “Installation – Water display during the intake”).
Problem solving guide Water drainage fault Problem Possible cause and remedy The alarm tone is Before rectifying the problem, you must: sounding. Switch the dishwasher off. The message Water drainage fault. appears in the Drain There might be water in the wash cabinet. display.
Inserting a PowerDisk”). The following message If the same fault message appears again, call appears in the display: Miele. AutoDos lid open The AutoDos function is active and the PowerDisk The following message appears in the display: is empty.
Page 91
AutoDos sensor and manually dispensing the detergent via the detergent compartment. If you wish to use automatic dispensing again, contact Miele. At the end of the An empty PowerDisk has been inserted or the programme, the alarm AutoDos is blocked by residual detergent.
Problem solving guide Spray arm fault Problem Possible cause and remedy During the programme The lower spray arm is blocked or the jets of the lower spray arm are clogged. The AutoDos and at the end of the programme, the display function is automatically deactivated during the shows the following programme because the AutoDos detergent outlet...
Problem solving guide General problems with the dishwasher Problem Possible cause and remedy The indicator lights and The dishwasher has switched off automatically to the display are dark. save energy. Switch the dishwasher back on using the sensor. Detergent residue is left The detergent compartment was still damp when in the detergent detergent was added.
Problem solving guide Noises Problem Possible cause and remedy Knocking noise in the A spray arm is knocking against a crockery piece. wash cabinet. Carefully open the door and rearrange the wash items that are obstructing the spray arm. Rattling noise in the Items of crockery are not secure in the wash cabinet.
Problem solving guide Unsatisfactory cleaning result Problem Possible cause and remedy The dishes are not The items were not loaded correctly. clean. See notes under “Loading the dishwasher”. The programme was not thorough enough. Select a more intensive programme (see “Programme chart”).
Page 96
Problem solving guide Problem Possible cause and remedy Dishes are not dry or The amount of rinse aid may be insufficient, or the cutlery and glasses are rinse aid reservoir is empty. blotchy. Replenish the rinse aid, increase the dosage, or change the brand of rinse aid (see “Using for the first time - Rinse aid”).
Page 97
Problem solving guide Problem Possible cause and remedy White residue is visible Not enough rinse aid was added. on the dishware. Increase the dosage (see “Settings – Rinse aid”). Clouding has occurred The salt reservoir is empty. on glassware and ...
2 years. Miele. For further information, please refer to your warranty booklet. You can book a Miele customer service call-out online at www.miele.com/service. Contact information for Miele can be found at the end of this booklet.
Miele appliances. glass protective additives These and many other useful products - phosphate-free – environmentally can be ordered from the Miele online friendly store or a Miele Experience Centre. - water-soluble wrapping – no need to Detergents...
Page 100
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. IntenseClean - for use with the Maintenance prog. programme without detergent dispensing - cleans the dishwasher effectively and thoroughly - removes grease, bacteria and associated unpleasant odours...
(up to max. 60 °C). Provided that your dishwasher has If energy-saving water heating sources, been installed correctly, the Miele such as a solar water heating system, Waterproof system will protect you from are used, we recommend connecting to water damage throughout its lifetime.
Page 102
*INSTALLATION* Installation A tap with a ¾" male thread must be Risk of damage due to excessive provided on site. If this type of tap is pressure. not available, only a qualified plumber A brief increase in the water pressure may connect the dishwasher to the can damage components of the household water supply.
*INSTALLATION* Installation Drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system is fitted pressure or being tugged. with a non-return valve, which prevents dirty water from flowing back into the ...
Page 104
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide for the rollers of the lower basket in the door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water.
Connection should be made via a (available from Miele) in order to avoid a suitable switched socket. hazard. For safety reasons, such replacement may only be carried out by a suitably qualified and competent technician or by Miele.
Technical data Technical data Dishwasher model Normal Height of freestanding 84.5 cm appliance (adjustable by +3.5 cm) Height of built-in appliance 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Niche height min. 80.5 cm (+6.5 cm) min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Niche width 60 cm 60 cm Depth of freestanding...
Page 107
Technical data Dishwasher model Normal Power consumption when 0.3 W 0.3 W switched off Power consumption when 5.0 W 5.0 W not switched off Networked standby 0.9 W 0.9 W Frequency band of the Wi-Fi 24000 GHz – 24835 GHz module Maximum transmission power <...
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements Use the sensors to select the by adjusting the settings. menu option you want to change and confirm your selection with OK. Settings can be altered at any time. Submenu options that have already Opening the Settings menu been selected will have a tick ...
Settings Language Time of day The display can be set to appear in one The current time of day must be set of several different languages. before you can use the timer option. You can change the language used in Setting the clock format the display and also the country via the You can select either a 24-hour or 12-...
Settings Water hardness AutoDos (automatic dispensing) Your dishwasher is fitted with a water softener. If you later wish to change the fill level or dispensing amount of the PowerDisk, - The dishwasher needs to be you can adjust the pre-set values programmed to the correct water according to the information on the hardness for your area.
- Increase the rinse aid dosage. Additional menu options will be added to the “Settings“ and “Miele@home” If clouding or smearing appears on menus. crockery and glassware: Make sure that your Wi-Fi network - Decrease the rinse aid dosage.
Page 112
App to carry out the following tasks: above. - Control your dishwasher remotely - Call up information on the operating status of your dishwasher - Call up information on the programme sequence of your dishwasher - Set up a Miele@home network with other Wi-Fi-enabled Miele appliances...
Page 113
menu option option and confirm with OK. Deactivate and confirm with OK. Use the sensors to consecutively In the Miele@home menu, the menu call up the Wi-Fi signal strength, the option Activate will now be displayed name of your router, and the instead of associated IP address.
This is the only way to ensure that all switched off, you can use the personal data has been removed and a Miele@mobile App to call up previous owner will no longer be able to information about your appliance. access the dishwasher.
Otherwise, the update will be aborted and will not be Deactivate RemoteUpdate if you do not installed. want any updates to be downloaded automatically. - Some software updates can only be carried out by a Miele service technician.
EcoStart option to take advantage of dishwasher to your Wi-Fi network (see your electricity supplier’s cheaper “Settings - Miele@home”). energy tariffs (see “Options - Timer”). function (only functional SmartStart With this option selected, your...
Page 117
Settings Setting the electricity tariff times Changing the electricity tariff times Before you can use the EcoStart option, You can change the start, finish, or you must set at least one electricity priority of an electricity tariff time. tariff time. ...
Settings Deleting the electricity tariff times Consumption (EcoFeedback) You can delete the settings for an You can set whether the energy and energy tariff time and in doing so water consumption is displayed for the deactivate the EcoStart option for this selected programme.
Settings Display brightness Volume You can set the display brightness to A sequence of signal tones will sound one of seven different levels. at the end of the programme or if there is a fault, provided that the acoustic signals are activated. Signal tones in the event of a fault In the event of a fault, the alarm tone will sound four times at intervals with a...
If you only ever use combination In some programmes the door detergent products or automatic automatically opens slightly to assist dispensing using Miele PowerDisks (if the drying process. available), you can switch off the refill This function can be deactivated if you reminders for reactivation salt and rinse wish.
The settings of the Wi-Fi module have Extra dry to be reset separately (see "Settings – Miele@home – Reset"). You can select this function in order to increase the drying performance of the Select and confirm with OK.
Page 123
Miele Experience Centre South Melbourne: Auckland: 206-210 Coventry Street 8 College Hill South Melbourne, VIC 3205 Freemans Bay, Auckland 1011 Miele Experience Centre and Office Sydney: Miele Experience Centre Wellington: 3 Skyline Place Frenchs Forest, NSW 2086 183 Featherston Street...
Page 124
G 7314, G 7319 en-AU, NZ M.-Nr. 11 479 190 / 00...