Table of Contents
Advertisement
Quick Links
Tank Rinse Kit
Multi-Pro 5800 Turf Sprayer
Model No. 41614—Serial No. 315000001 and Up
Note: Determine the left and right sides of the machine
from the normal operating position.
The Rinse Kit is designed to remove residual chemicals from
a sprayer tank and affected hoses. It is a dedicated attachment
for a turf spray application vehicle and is intended to be used
by professional, hired operators in commercial applications.
The information in this manual can help you and others avoid
injury and product damage.
Figure 1 illustrates the location of the model and serial
numbers on the product.
G014295
1. Model and serial number plate
Model No.
Serial No.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1
Figure 1
Register at www.Toro.com.
Safety
Read the safety and operation instructions in the machine
Operator's Manual.
Chemical Safety
WARNING
Chemical substances used in the spray system may
be hazardous and toxic to you, bystanders, animals,
plants, soils or other property.
• Carefully read and follow the chemical
warning labels and material safety data
sheets (MSDS) for all chemicals used and
protect yourself according to the chemical
manufacturer's recommendations. For example,
use appropriate personal protective equipment
(PPE) including face and eye protection, gloves,
or other equipment to guard against personal
contact with the chemical.
• Keep in mind that there may be more than one
chemical used and information on each should
be assessed.
• Refuse to operate or work on the sprayer if this
information is not available!
• Before working on a spray system make sure the
system has been triple rinsed and neutralized
according to the recommendations of the
chemical manufacturer(s).
• Verify there is an adequate supply of clean water
and soap nearby, and immediately wash off any
chemicals that contact you.
•
Obtain proper training before using or handling
chemicals.
•
Use the correct chemical for the job.
•
Follow the chemical manufacturer's instructions for the
safe application of the chemical.
•
Handle chemicals in a well ventilated area.
•
Wear goggles and other protective equipment as
instructed by the chemical manufacturer. Ensure that as
little skin as possible is exposed while using chemicals.
•
Have clean water available especially when filling the
spray tank.
Original Instructions (EN)
All Rights Reserved *3403-825* B
Printed in the USA.
Form No. 3403-825 Rev B
Installation Instructions
Advertisement
Table of Contents
Related Manuals for Toro 41614
Summary of Contents for Toro 41614
- Page 1 Form No. 3403-825 Rev B Tank Rinse Kit Multi-Pro 5800 Turf Sprayer Model No. 41614—Serial No. 315000001 and Up Installation Instructions Safety Note: Determine the left and right sides of the machine from the normal operating position. Read the safety and operation instructions in the machine The Rinse Kit is designed to remove residual chemicals from Operator’s Manual.
-
Page 2: Table Of Contents
• • Do not eat, drink, or smoke while working with chemicals. Chemicals and fumes in the tanks are dangerous; never enter the tank or place your head over or in the opening. • Always wash your hands and other exposed areas as soon •... -
Page 3: Procedure Description Qty
Procedure Description Qty. Delay timer Fuse (40 A) 3-position switch (with indicator light—2015 models and before machines) Install the delay timer and dash switch. 3-position switch (without indicator light—2016 models and after machines) Relay Power relay Screw #10–24 – No parts required Finish the rinse tank kit installation. -
Page 4: Rinse Tank
Installing the Rinse Tank Bulkhead Fitting Parts needed for this procedure: Rinse tank Filler cap G014229 Bulkhead fitting Clear gasket Figure 3 Plastic flange nut 1. Bulkhead fitting with the 3. Filler cap 90° fitting wire attached 2. Bottom hole of the rinse Retaining fork tank Procedure... -
Page 5: Rinse-Tank Strap
Installing the Rinse Tank Parts needed for this procedure: Rinse-tank strap Bolt G014232 Washer Figure 7 Locknut 1. Locknut 5. Right-rear tank strap Carriage bolt 2. Bolt 6. Retaining fork 3. Washer 7. Supply hose Preparing the Tank 4. Locknut 1. -
Page 6: Rinse Nozzle
Installing the Rinse Tank Note: Once the rinse tank has been initially filled, check and tighten the rinse-tank strap fasteners , if necessary, as the 1. Install the rinse tank as shown in Figure weight of the liquid can further seat the tank against the frame. Installing the Rinse Nozzles Parts needed for this procedure: Rinse nozzle... - Page 7 Installing the Rinse Nozzles 1. Assemble the nozzles as shown in Figure G014245 Figure 12 1. Hole saw 2. Drill mark, behind the lid G014252 Figure 14 5. After drilling the hole, remove any rough edges in the 1. Bulkhead fitting 4.
-
Page 8: Rinse-Tank Pump
G014247 Figure 16 G014250 1. Assembly nozzle bulkhead 2. 90° fitting Figure 18 1. Assembly nozzle bulkhead 2. 90° fitting 5. Move to the forward hole in the tank. 6. Install a nozzle assembly up through the drilled hole 9. Align the hose barb of the 90° fittings to the right side (Figure 17). -
Page 9: Hose (Rinse Nozzle)
3. Locate the straight barb hose connectors in loose parts and install the connector to the inlet and outlet openings of the rinse-tank pump (Figure 20). G014291 Figure 21 1. Rinse-nozzle barb 3. Hose clamp 2. Rinse-nozzle hose 4. Tee fitting G014290 Figure 20 3. - Page 10 Installing the Rinse Tank Hose G014292 1. Locate the rinse tank hose in loose parts. 2. Install a hose clamp over the end of the hose. 3. Install one end of the hose to the 90° fitting at the bottom of the rinse tank (Figure 24).
- Page 11 Installing the Delay Timer and Dash Switch Parts needed for this procedure: Delay timer Fuse (40 A) 3-position switch (with indicator light—2015 models and before machines) G0151 13 3-position switch (without indicator light—2016 Figure 26 models and after machines) 2014 and Before Machines Relay 1.
- Page 12 Figure 28 2016 and After Machines 1. Fuse (40 A) 5. Flange-head bolt (#10-24 x 1/2 inch) 2. Fuse block 6. 4-socket connector (machine wire harness) 7. Relay 3. Locknut (#10-24) Figure 27 4. Electrical panel 2015 Machines 1. Fuse block 7.
- Page 13 Installing the Rocker Switch into the Dash 1. Remove the plug for the rinse tank switch from the dash panel (Figure 29 Figure 30). Note: It is the second plug to the right of the ignition key. Figure 30 2016 and After Machines 1.
- Page 14 Operation Operating the Rinse Kit Connecting the Battery Using the Rinse Kit will result in a rinsate (a diluted solution of residual chemicals). In many cases, it is appropriate to apply the rinsate onto a treated area(s). However, before No Parts Required doing so, check with the chemical manufacturer to ensure that the application of a diluted solution to the treated area(s) will Procedure...
- Page 15 Release pressure and the 3-position switch moves to the position. Power to the pump is shut off. EUTRAL Note: If you have a 2015 and before machine, the light in the 3-position switch shuts off. Filling the Tank Position the sprayer on a level surface, set the parking brake, shut off the sprayer pump, shut off the engine, and remove the key from the key switch.
- Page 16 Every 100 hours—Inspect hoses and O-rings for damage Before storing the machine, perform the following: Contact your Authorized Toro Dealer to obtain replacement 1. Add RV anti-freeze solution into the rinse tank. parts. 2. Circulate the anti-freeze through rinse pump.
- Page 17 Notes:...
- Page 18 Notes:...
- Page 19 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 20 Countries Other than the United States or Canada Customers should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor's service or have difficulty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company.