Valor H3 Series Installation Manual
Three-sided backing plate kit
Hide thumbs
Also See for H3 Series:
- Installation manual (13 pages) ,
- Homeowner's manual (26 pages) ,
- Installation manual (81 pages)
Advertisement
Available languages
Available languages
Quick Links
INSTALLATION MANUAL
1035BPB Three-sided Backing Plate Kit
CSA approved for use with Valor H3 1000 Heater Models
in New Construction/Zero Clearance applications
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
The 1035BPB backing plate is intended to be used on Valor heaters models H3 1000 in new construction
applications/zero clearance. Refer to installation manual supplied with appliance for clearances to combustible and
other specifications when using the 1035BPB "New Construction" Backing Plate.
The 1035BPB needs to be fitted with the 1045CFV—Clearview Front Surround to complete the installation.
Note: When mounting over top of the wall finish, this trim allows for non-combustible material up to
maximum 3/4" (19 mm) thickness installed over top of the required 1/2" (13 mm) cement board. Otherwise,
run non-combustible finish to outer edge of backing plate.
37-1/2" (953 mm)
Trim flush with bottom of appliance
4007387-02
© Copyright Miles Industries Ltd., 2019
H3 Series
Left hand door
Left hand door
H3 1000
Backing plate
Backing plate
assembly
assembly
Removable
Removeable
bottom plate
bottom plate
Overview
Right hand door
Right hand door
1
Advertisement
Related Manuals for Valor H3 Series
Summary of Contents for Valor H3 Series
- Page 1 INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. The 1035BPB backing plate is intended to be used on Valor heaters models H3 1000 in new construction applications/zero clearance. Refer to installation manual supplied with appliance for clearances to combustible and other specifications when using the 1035BPB “New Construction”...
-
Page 2: Installation
Installation 2. Slide the removable bottom panel into the clips in the side panels. 1. On completion of appliance installation and wall finish application, insert the backing plate assembly into the liner box, and attach it using 4 screws into the left and right sides. - Page 3 Repair Parts List Description Part Number Backing plate assembly 4007593AZ RH door assembly 4007099AZ LH door assembly 4007098AZ Removable bottom panel 4007096AZ Sheet metal screws (4) 100A757 Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication. Designed and Manufactured by / for Miles Industries Ltd.
-
Page 4: Directives D'installation
CONSOMMATEUR : Conservez cette notice pour consultation ultérieure. La Plaque de finition 1035BPB est conçue pour être installée sur les foyers Valor 1000 H3 installés dans une nouvelle contruction ou à dégagement zéro. Consultez le guide d’installation fourni avec l’appareil pour connaître les dégagements aux matériaux combustibles et autres spécifications lorsque vous installez la Plaque de finition... - Page 5 Installation 2. Insérez le panneau amovible sous les attaches des supports des côtés et poussez le panneau jusqu’à ce 1. Une fois le foyer installé et la finition du mur com- qu’il soit égal à la surface de la plaque. plétée, insérez la plaque de finition à...
- Page 6 Pièces Code Description Pièce n Plaque de finition 4007593AZ Porte droite 4007099AZ Porte gauche 4007098AZ Panneau amovible 4007096AZ Vis à métaux (4) 100A757 Parce que nous favorisons une politique de développement continu, certains détails de la présente publication peuvent varier. Conçue et fabriquée par / pour Miles Industries Ltd.