Related Manuals for Cambium C3VoIP-150
Summary of Contents for Cambium C3VoIP-150
- Page 1 C3VoIP-150 Installation Manual Cambium C3VoIP-150 Installation Manual Version 1.0 May 2014 C3VoIP-150 Installation Manual...
- Page 2 C3VoIP-150 Installation Manual Revision Record Version Date Description Applicability Version 1.0 May 2014 First edition Version 1.0 for Cambium Networks May 2014 C3VoIP-150 Installation Manual...
-
Page 3: Table Of Contents
C3VoIP-150 Installation Manual Contents Contents ............................3 Introduction ..........................1 Package Contents ...................... 1 Product Overview ........................2 Hardware Specification ..................... 2 Front View and LEDs Introduction ................2 Back View and Interface Introduction ............... 3 Installation ..........................4 Connection topography ..................... 4 Installation Steps ....................... - Page 4 C3VoIP-150 Installation Manual 7.4.2 Preferences ...................... 24 7.4.3 Dial Plan ......................26 7.4.4 Black List ......................27 7.4.5 Call Log ......................28 FXS2 ........................29 Administration ......................30 7.6.1 Management ....................30 7.6.2 Security ......................32 7.6.3 Firmware Upgrade ..................32 7.6.4...
-
Page 5: Introduction
Internet. It also includes features and functions of C3VOIP-150 VoIP Gateway components and how to use it correctly. Before you can connect the C3VoIP-150 to the internet and use it, you must first have a high-speed broadband connection with a Cambium PMP product, such as PMP450 or ePMP AP... -
Page 6: Product Overview
C3VoIP-150 Installation Manual 2. Product Overview Hardware Specification Item Specification Power Adapter Input: 100~240V AC, 50~60 Hz Output: DC 12V, 2A RTL8972@240 MHZ Ports Radio port (WAN Port) and LAN port Operating Temperature 5～45℃(41～113℉) Storage Temperature -25～85℃(-13～185℉) Relative Humidity 10～90% (No condensing) Dimension (L×W×H) -
Page 7: Contents
PHONE1 (RJ11) Connect to traditional phone or FAX Machine PHONE2 (RJ11) Connect to traditional phone or FAX Machine Press 10s to set C3VOIP-150 factory settings. LAN (RJ-45) Connect to PC or build a small LAN or Wi-Fi network Radio (WAN) (RJ-45) -
Page 8: Installation
2. Connect the LAN port at the back of C3VOIP-150 to your conventional telephone, using a standard phone cable 3. If there is a need to setup a small LAN network at home, the C3VOIP-150 must work in router or bridge mode so that users can access to the Internet through C3VOIP-150. Then you must connect your PC or LAN connection equipment (e.g. -
Page 9: Ivr
2. On the phone dial in **** to start IVR, then the C3VOIP-150 prompts : “Please enter your option, one WAN Port ……”. 3. Choose the operation code from 0 to 9, then C3VOIP-150 reports the contents. For details, see Table 3. - Page 10 Note: If you want to quit by the wayside, press “**”. Step 1. On the phone, dial in **** to start IVR Step 2.Choose “3”, and C3VOIP-150 report current WAN port subnet mask Step 3.Input a new WAN port subnet mask and with the end char # ...
- Page 11 1. If you want to quit by the wayside, press “*”. Step 4.Prompt “Operation successful” if password is right and then C3VOIP-150 is set to factory setting. Step 5.Press “7” reboot to make changes effective. Step 1. On the phone, dial in **** to start IVR Step 2.Choose “7”, and C3VOIP-150 report “Reboot”...
-
Page 12: Notice
Notice Under Voice menu, press *(star) to return to the top of the menu. If any changes made in the IP assignment mode, please reboot the C3VOIP-150 for the settings to take effect. When entering an IP address or subnet mask, input “*” after an address field and add “#” to complete the input For example, to enter the IP address 192.168.1.11 by keypad, press these keys:... -
Page 13: Parameter Introduction
C3VoIP-150 Installation Manual 5. Parameter Introduction Password There are 2 levels to access C3VOIP-150: Administrator level and User level. Passwords for these 2 levels are different. User at Administrator level can browse and set all configuration parameters, while user at User level can set all configuration parameters except SIP1/2 and some parameters that cannot be changed, such as server address and port. -
Page 14: Login To The Web Server
C3VoIP-150 Installation Manual 6. Login to the WEB Server C3VOIP-150 has an embedded Web server that responds to HTTP get/post requests． User can use a Web browser like Internet Explorer to login and then configure C3VOIP-150． Login WEB via the LAN port Step 1: Open WEB browser;... -
Page 15: Web Interface Introduction
Every time user makes any changes, the button must be pressed to confirm the changes. After pressing the button, the red notice appears and prompts the user to ‘Reboot’, as shown below: To cancel the changes. Press it to reboot C3VOIP-150. May 2014 C3VoIP-150 Installation Manual... -
Page 16: Configuration From The Web Page
C3VoIP-150 Installation Manual 7. Configuration from the WEB page Status User can view C3VOIP-150 Basic and Syslog. It is the first page which user sees after a Web login. 7.1.1 Basic User can see the Product Information, SIP Account Status, Net Status, VPN Status, LAN Status, and System Status. -
Page 17: Syslog
C3VoIP-150 Installation Manual 7.1.2 Syslog In this configuration Interface user can view Syslog, which records the C3VOIP-150’s important configuration information. By default, syslog is enabled and the level is INFO, there are two system log level, INFO and Debug, in Debug level, there is more information. If you want to change, please go to Administration/Management page, System Log Setting column to change. -
Page 18: Network
Static: Users need to set IP Address, Subnet Mask, Gateway IP and DNS. DHCP: C3VOIP-150 auto-configures the WAN parameter with immediate effect. PPPoE: Users can enable C3VOIP-150 to connect to Internet by ADSL. Interface 1.Static 1) Set “Static” in the “INTERNET” text. - Page 19 4) You must click the “Reboot” in the left of the page to reboot the Introduction C3VOIP-150 if you see the words “Please REBOOT to make the changes effective!” After Reboot, you can see PPPoE Status and the network parameters in the System Status page, if C3VOIP-150 has connected successfully.
-
Page 20: Lan
In this page, user can set the IP address of the device and set DHCP server. DHCP server is a kind of network function, C3VOIP-150 can supply DHCP service for the network which is linked with C3VOIP-150’s LAN if you enable the DHCP server for C3VOIP-150’s LAN (this is enabled by default). -
Page 21: Mac Address Clone
MAC address. So you may not pass the provider’s authentication when you use a new C3VOIP-150. In this case, you can use MAC Clone to copy your PC’s MAC address to C3VOIP-150’s WAN. -
Page 22: Dmz
Here, DMZ is the same with mapping ports for network equipment. Introduction PC which is linked with C3VOIP-150’s LAN can get the requests from the LAN by some ports of C3VOIP-150’s WAN retransmits. (Your PC is DMZ computer for short as follows.) ... -
Page 23: Port Setting
C3VoIP-150 Installation Manual 7.2.7 Port Setting In this webpage, user can set WAN/LAN port speed negotiation, default are Auto and options are 100 Mbps Full, 100 Mbps Half, 10 Mbps Full and 10 Mbps Half. 7.2.8 Multi WAN Webpage Description Name: The name of VLAN. -
Page 24: Sip
C3VoIP-150 Installation Manual 7.3.1 SIP Settings Interface 1) SIP Parameters: Settings This page displays the SIP parameters. Introduction 2) NAT Traversal If you want traverse NAT/Firewall, please enable NAT Traversal and fill in the corresponding parameters. 7.3.2 VoIP QoS Some ISPs supply QoS services. The QoS services can make the best of improving the quality of Voice application. -
Page 25: Fxs1
C3VoIP-150 Installation Manual FXS1 7.4.1 SIP Account Interface Basic 1) Line Enable: To enable FXS1 2) Peer to Peer: To enable Peer To Peer on FXS1 port. 3) SIP Proxy: The IP address of SIP Server. 4) SIP Proxy Port: The port which SIP Server supports for VOIP service, default is 5060. - Page 26 C3VoIP-150 Installation Manual 5) Outbound Proxy: outbound Proxy ip or domain name. 6) Outbound Proxy Port: outbound Proxy’s Service port. 7) Backup Outbound Proxy: backup outbound proxy IP or Domain name. 8)Backup Outbound Port: backup outbound Proxy’s Service port 9) Display Name: The number is display in caller field 10) Phone Number: Number of telephone provided by SIP Proxy.
- Page 27 6) Register Refresh Interval (Second): The interval between two normal Register messages. You can use the default setting. 7) RTP Port: C3VOIP-150 selects idle port for RTP if you set “0”, otherwise C3VOIP-150 use the value you set. Generally speaking, set “0”.
-
Page 28: Preferences
22) User Type: Define the user type, options are IP and Phone. 23) Only Recv Request From Server: If this option is enabled, C3VOIP-150 only receives call from the same SIP server. 24) Request URI user check: Enable or disable request URI user check. - Page 29 Dial Time Out: Define how long the device waits before sending out the phone numbers. Call Immediately Key: Add this key after the phone numbers, C3VOIP-150 dials in the numbers immediately. ICMP Ping: To enable or disable ICMP ping. Escaped char enable: To enable or disable escaped char.
-
Page 30: Dial Plan
C3VoIP-150 Installation Manual 7.4.3 Dial Plan If you set a shortcut number for a dial rule and dial a shortcut number, C3VOIP-150 realizes the whole dial rule immediately. Interface Picture 1 Picture 2 Dial Plan: To enable or disable dial plan. -
Page 31: Black List
C3VoIP-150 Installation Manual 7.4.4 Black List In this configuration interface, you can set the blacklist, enter the name and phone number you wish to block. User also can upload a piece of Blacklist file. Settings If user sets a block on the number 2222, 2222 cannot call you, but you Introduction can call 2222. -
Page 32: Call Log
C3VoIP-150 Installation Manual 7.4.5 Call Log Settings User can view C3VOIP-150 call log, including missed, dialed and Introduction answered calls. User can also delete the call logs. Interface May 2014 C3VoIP-150 Installation Manual... -
Page 33: Fxs2
C3VoIP-150 Installation Manual FXS2 Settings Introduction The settings of FXS2 are the same as FXS1. Interface May 2014 C3VoIP-150 Installation Manual... -
Page 34: Administration
Settings change the password. Introduction 2) Language: Change the language. C3VOIP-150 supports English, Russian, Finnish, Spanish, Chinese, etc. 3) Web Access: Enable or disable web access, user can also define the web access port and web idle timeout. - Page 35 3) Remote Syslog Enable: To enable or disable remote system log. 4) Remote Syslog Server: Enter the IP address of the remote system log server, C3VOIP-150 sends the system log to the host. To check system log, user must open syslog server on your local PC, tftp32 can be used as system log server.
-
Page 36: Security
On this page, user can upload HTTPs provision SSL certificates or upload the TR069 certificates. If C3VOIP-150 deletes the HTTPs provision and this webpage, Flyingvoice adds the HTTPs provision soon in the new firmware, so we still keep this section. -
Page 37: Provisioning
C3VoIP-150 Installation Manual 7.6.4 Provisioning 1) Provisioning allow C3VOIP-150 auto-upgrading or auto-configuring 2) The current C3VOIP-150 supports 2 ways to provision: TFTP and HTTP. Before testing or using TFTP, user must have TFTP server and upgrading Generally file and configuring file. - Page 38 1) Upgrade Enable: To enable or disable firmware upgrade via Settings provision. Introduction 2) Upgrade Error Retry Delay: If the last upgrade fails, C3VOIP-150 tries upgrading again after “Upgrade Error Retry Delay” period, default is 3600s. 3) Upgrade Rule: URL for the upgrade file May 2014 C3VoIP-150 Installation Manual...
-
Page 39: Snmp
C3VoIP-150 Installation Manual 7.6.5 SNMP Interface 1) SNMP Enable: To enable or disable SNMP Settings 2) Trap Server Address: Enter the trap server address. 3) Read Community Name: string, as an express password between Introduction management progress and agent progress. - Page 40 C3VoIP-150 Installation Manual 1) TR069 Enable: To enable TR069 or not. 2) CWMP: If or not enable TR069 3) ACS URL: The URL of TR069 server. Settings 4) User Name: Enter the user name to connect to TR069 server. Introduction 5) Password: Enter the password to connect the TR069 server.
-
Page 41: Functions
Dial the number directly and wait for 5 seconds (by default, it has No Key Entry Timeout). Dial the number ending with char #. C3VOIP-150 dials out immediately Dial the phone number which matches one dial rule. C3VOIP-150 dials out immediately and there is no need to press # or wait for 5 seconds. -
Page 42: 3-Way Conference Call
Call Forwarding Step 1: Open FXS1/FXS2→Preferences→Call Forward, enable the one call forward mode and fill forwarded number Step 2: C3VOIP-150 forwards incoming call to the forwarded number according to the settings of Call Forward and call status Direct IP calls Direct IP calling allows two phones, that is, an ATA with an analog phone and another VoIP Device, to talk to each other without a SIP proxy. -
Page 43: Daylight Saving Time
C3VoIP-150 Installation Manual Figure 3 Hotline Step 2.Picking up handset or press speaker button, C3VOIP-150 will ring hotline immediately. If you want to delay some seconds after pick up the handset, please add delay time. For example, C3VOIP-150 will call 511 after user picks up the handset for 4 seconds. -
Page 44: Password Control
In local: Step 1: Open Administration=>Management page, System Log Setting column. Step 2: Choose log level from INFO and Debug, in INFO level, C3VOIP-150 records INFO log and in the Debug level, C3VOIP-150 records all debug information. Step 3: Click the Save button to save and then click the Reboot button for the changes to appear. -
Page 45: Software Features
C3VoIP-150 Installation Manual 9. Software Features Supports SIP V2.0（RFC 3261/RFC3262） Supports G.711 (A-Law, μ-Law), G.723, G.722 and G.729A/AB Codes Supports two RJ45 10/100M that one is RADIO (WAN) port and another is LAN port. Supports two RJ-11 for FXS port to connect your analog phone ... -
Page 46: Third Party Software
C3VoIP-150 Installation Manual 10. Third Party Software The software may contain one or more items of Third Party Software supplied by other third - party suppliers. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD - PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD - PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD - PARTY LICENSE.