Page 1
VBOX Touch Lap Timing Mode - Quick Start Guide VBOX Touch features a 10 Hz GPS receiver and a responsive colour touchscreen. The Lap Timing Mode allows you to view live Lap Timing information in relation to a set Start/Finish line.
SD Card VBOX Touch is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum).
Page 5
For more information on antenna mounting positions click here. 2. If applicable, connect the external GPS antenna to the VBOX Touch. 3. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit and attach to the vehicle windscreen.
Page 6
Main screen Basic screen 8. Take the vehicle outside and wait for the VBOX Touch to gain satellite lock. The Satellite Icon should display as solid green https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Touch/...
Page 7
11. The unit is now ready to display live Lap Timing values. Main Screen: • Once the start/finish line is crossed, VBOX Touch will automatically begin to create a reference lap. When a reference lap is being created, a 'Creating a Reference Lap' message is displayed within the Delta-T section and the reference lap section will show a rolling lap time.
Page 8
Basic Screen: • VBOX Touch will display the current live lap time and when a new lap starts, the previous lap time will be displayed for 3 seconds before reverting to displaying the current live lap time. It is possible to just display the previous lap...
A recorded session will be saved within the SD card as a .vbo file. This can be later analysed using our next generation of data analysis software VBOX Test Suite, which can be downloaded from the VBOX Automotive Website. https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Touch/...