Makita EK7650H Instruction Manual
Hide thumbs
Also See for EK7650H:
- Original instruction manual (236 pages) ,
- Instruction manual (104 pages) ,
- Owner's and safety manual (92 pages)
Table of Contents
Related Manuals for Makita EK7650H
Summary of Contents for Makita EK7650H
- Page 1 Instruction Manual Original Instruction Manual EK7650H EK7651H Important: Read this instruction manual carefully before putting the Power Cutter into operation and strictly observe the safety regulations! Keep this instruction manual!
-
Page 2: Table Of Contents
English Thank you for purchasing a MAKITA Table of Contents Page product! Packing Congratulations on choosing a MAKITA Power Cutter! We are Symbols SAFETY PRECAUTIONS Read this instruction manual carefully before putting the Power Maintenance Technical data Denomination of components... -
Page 3: Symbols
Delivery inventory Symbols... -
Page 4: Safety Precautions
SAFETY PRECAUTIONS General precautions The operator MUST read this instruction manual to ensure safe operation of the Power Cutter: hearing protection respiratory protection... - Page 5 safety shoes or boots work suit Fuels / Refuelling Keep fuel away from children! Putting into operation 3 meters Before starting work the Power Cutter must be checked for perfect function 30 m...
- Page 6 Cutoff discs The protection hood must always be on! Change discs only with the engine off! NOTE: CAUTION: for a short period of time or eliminating faults IMPORTANT: Maintenance...
- Page 7 Kickback and lock-in been started! Important!
- Page 8 Cutting metals IMPORTANT! CAUTION: The rapid rotation of the cutting disc heats metal and melts it at the point of in order Secure cutoff material from falling! CAUTION: Cutting masonry and concrete IMPORTANT! NOTE:...
- Page 9 CAUTION: Watch out for electric wires and cables! The rapid rotation of the cutting disc at the point of contact throws fragments hood down as far as possible behind the cut NOTE: CAREFUL! Transport and storage place to place on a site...
-
Page 10: Maintenance
Maintenance Before performing maintenance work switch off the Power Cutter Cutter! You will only be putting your own safety at risk! SERVICE First aid (29) NOTE:... -
Page 11: Technical Data
Technical data Clutch Fuel... -
Page 12: Denomination Of Components
Denomination of components... -
Page 13: Putting Into Operation
PUTTING INTO OPERATION CAUTION: Always turn off the engine and pull off the spark plug cap before doing any work on the Power Cutter! Always wear CAUTION: Start the Power Cutter only after complete assembly and Mounting the cutting disc WARNING: it so that the arrow is in the same direction as the outer (4) with... - Page 14 Tightening the V-belt / Checking V-belt tension IMPORTANT: V-belt tension will result in premature wear to the V-belt and NOTE: (10) to the (11) (12) IMPORTANT: Before operating NOTE: Oil replacement Point 1 <Oil cap>...
- Page 15 Oil replacement Point 2 <What to do if oil is spilled> WARNING: <Fuel storage period> Storing the Power Cutter and fuel container <Fuel> Fuel points <Refueling> <Usable Gasoline>...
-
Page 16: Operating Starting
Operating Starting WARNING: Switch Do not start the engine in locations where refueling has CAUTION: Warming up NOTE: Switch... -
Page 17: Maintenance
Adjusting the carburetor At the factory the idling speed has been set to to engine damage! can damage the engine! MAINTENANCE CAUTION: Before doing any work on the Power Cutter stop the engine and let it cool down Start the Power Cutter only after complete assembly and NOTE:... - Page 18 IMPORTANT: Because many of the parts and assemblies not mentioned IMPORTANT: Power Cutter must be repaired by a MAKITA SERVICE V-belt Tensioning screw Tensioning screw Cleaning the protection hood NOTE: To install the cutting wheel see “Mounting the cutting disc”...
- Page 19 screws screws Notice:...
- Page 20 Spark plug maintenance 0.5 mm Replacing the suction head (13) (12) CAUTION:...
-
Page 21: Cleaning The Starter
Cleaning the starter (14) (15) (16) - Page 22 Changing the cutting attachment position (central/side) Mounting direction of hood Mounting in direction B Plier...
-
Page 23: Special Accessories
Water tank (the component of trolley) SPECIAL ACCESSORIES Diamond cutting discs metal Mains/pressure water system Guide trolley Filter set... -
Page 24: Maintenance Chart
Maintenance chart Operating time Before After Daily Before Corres- 200h Item operation refuleling (10h) storage ponding P — — — Clean — — — —... -
Page 25: Fault Location
Fault location Fault System Cause Clutch start turning Starter not engaging Clutch... -
Page 26: Troubleshooting
Troubleshooting State of abnormality Probable cause (malfunction) Remedy Clean Clean Clean Clean Clean... -
Page 27: Storage
Storage WARNING: CAUTION:... - Page 28 Makita Corporation Anjo, Aichi, Japan www.makita.com 885023H223...