hit counter code
2N IP Video Kit Installation Manual
  1. Manuals
  2. Brands
  3. 2N Manuals
  4. Control Unit
  5. IP Video Kit
  6. Installation manual
2N IP Video Kit Installation Manual

2N IP Video Kit Installation Manual

Ip intercom module
Hide thumbs Also See for IP Video Kit:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
®
2N IP Video Kit
IP Intercom Module
Installation Manual
Version:
2.11
www.2n.cz

Advertisement

Table of Contents
loading

Related Manuals for 2N IP Video Kit

Summary of Contents for 2N IP Video Kit

  • Page 1 ® 2N IP Video Kit IP Intercom Module Installation Manual Version: 2.11 www.2n.cz...
  • Page 2 2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www. faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...".
  • Page 3 2.1 Before You Start 2.2 Mechanical Installation 2.3 Electric Installation 2.4 Extending Module Connection 2.5 Configuration 2.6 Downloads 3. Technical Parameters 4. Supplementary Information 4.1 Troubleshooting 4.2 Directives, Laws and Regulations 4.3 General Instructions and Cautions 2N TELEKOMUNIKACE a.s., www.2n.cz 3/46...

  • Page 4: Product Overview

    IP intercom line output. ® IP Video Kit allows up to 16 separate buttons or a 16-button matrix keypad to be connected. Set the button function flexibly according to your specific application needs. You can set up to three telephone numbers and call time profiles to each of the buttons to make the called subscriber accessible any time.
  • Page 5 ® IP Video Kit is very easy to install. All you have to do is connect it to your LAN using the LAN cable. An integrated two-port LAN switch simplifies installation on sites with a limited LAN infrastructure. Supply the intercom either from a 9–36 V source or directly from your POE supporting LAN.

  • Page 6: Components And Associated Products

    1.1 Components and Associated Products Basic Units Part No. 9154100C Intercom module in plastic box Part No. 9154101C Intercom module without box 2N TELEKOMUNIKACE a.s., www.2n.cz 6/46...

  • Page 7: Internal Units

    . On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall. 2N TELEKOMUNIKACE a.s., www.2n.cz 7/46...

  • Page 8: Voip Telephones

    IP network. Touchscreen and keyboard control. Part No. 91378358 Grandstream GXV3275 VoIP telephone GXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network. Touchscreen control. 2N TELEKOMUNIKACE a.s., www.2n.cz 8/46...

  • Page 9: Electric Locks

    BEFO 11211MB with mechanical blocking 12 V / 230 mA DC low consumption Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock. 2N TELEKOMUNIKACE a.s., www.2n.cz 9/46...
  • Page 10 12 V / 170 mA The failsafe lock is closed when electricity is switched on. When electricity is interrupted, the lock is opened. It contains a built-in contact to indicate whether the door is open or closed. 2N TELEKOMUNIKACE a.s., www.2n.cz 10/46...

  • Page 11: Power Supply

    FAQ: Electric locks – Difference between locks in 2N IP intercoms accesories Power Supply Part Numbers: PoE injector – without cable 91378100 PoE injetor – with EU cable PoE injector – with US cable 91378100E For power supply of intercom via...

  • Page 12: Additional Modules

    2N IP intercom , which can thus control devices on unlimited distance. Part No. 9159013 Exit button A button for connection to a logic input for opening a door inside a building. 2N TELEKOMUNIKACE a.s., www.2n.cz 12/46...
  • Page 13 IP end devices. Part No. 9154001 Electret microphone with self-adhesive layer. Sensitivity 42 dB, operating temperature 5–35 °C. Adhesion surface 25 x 25 mm. Cable length 2.9 m. Must be protected from water penetration. 2N TELEKOMUNIKACE a.s., www.2n.cz 13/46...
  • Page 14 45 mm. Cable length 1.4 m. Must be protected from water penetration. Part No. 9154003 ® Analogue camera for connection to the OEM intercom IP Video Kit External dimensions 32 x 32 mm Part No. 9154004 Water-proof metal buton Hole diameter 19 mm, button diameter 22 mm.

  • Page 15: Terms And Symbols

    Warning Always abide by this information to prevent damage to the device. Caution Important information for system functionality. Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. 2N TELEKOMUNIKACE a.s., www.2n.cz 15/46...

  • Page 16: Description And Installation

    2. Description and Installation Here is what you can find in this section: 2.1 Before You Start 2.2 Mechanical Installation 2.3 Electric Installation 2.4 Extending Module Connection 2.5 Configuration 2.6 Downloads 2N TELEKOMUNIKACE a.s., www.2n.cz 16/46...

  • Page 17: Product Completeness Check

    Product Completeness Check ® Before installing this product, please check whether the IP Video Kit delivery complies with the following packing list. ® 1x 2N IP Video Kit 1x Short Installation Manual 2N TELEKOMUNIKACE a.s., www.2n.cz 17/46...

  • Page 18: Mounting Types

    Use the proper wall mounting screws and dowels (not included in the delivery). Hang the device on the wall using the cover bottom holes. DIN rail mounting Mount the device to a standard TS 35 DIN rail. The recommended minimum DIN rail length is 14 cm. 2N TELEKOMUNIKACE a.s., www.2n.cz 18/46...
  • Page 19 PCB mounting (for Part No. 9154101 only) Use 4–6 distance columns and proper screws (not included in the delivery) to mount the PCB to the support. Fix the distance columns as shown in the figure. 2N TELEKOMUNIKACE a.s., www.2n.cz 19/46...
  • Page 20 When the proper mounting instructions are not met, water might get in and destroy the electronics. It is because the intercom circuits are under continuous voltage and water infiltration causes an electro-chemical reaction. The manufacturer's warranty shall be void for products damaged in this way! 2N TELEKOMUNIKACE a.s., www.2n.cz 20/46...

  • Page 21: Electric Installation

    Network (LAN) and how to connect supply voltage and other electric interfaces. The device must be part of the electrical system of the building. Device and PCB Connectors ® Figures below show the layout of the IP Video Kit connectors and terminals. PCB Connectors 2N TELEKOMUNIKACE a.s., www.2n.cz 21/46...
  • Page 22 LEDs RELAY NO, COM, NC Programmable relay switch with an accessible N/O and N/C contact LEDs LED1+, LED1− 3 current outputs for connection of programmable LED LED2+, LED2− indicators; two terminals per LED 2N TELEKOMUNIKACE a.s., www.2n.cz 22/46...

  • Page 23: Connection To Lan

    ® IP Video Kit is equipped with two LAN interfaces (LAN1 and LAN2) and an integrated Ethernet switch. You can use only LAN1 interfaces for LAN connection. LAN1 is the only interface provided with PoE. LAN2 helps connect another LAN device on the installation site.

  • Page 24: Connection Of External Power Supply

    We recommend the use of a shielded SSTP Ethernet cable. Connection of External Power Supply ® IP Video Kit can be supplied either from an external 9–36 V / 2 A DC source or directly from the LAN provided with the PoE 802.3af supporting network elements. External Power Supply Connect the external 12V power supply to the DC in terminals.

  • Page 25: Connection Of Led Indicators

    The functions of the LED1, LED2 and LED3 outputs are programmable. Connection of Keypad/Buttons ® IP Video Kit is equipped with an interface for connection of an external matrix keypad or up to 16 separate buttons; see the figure below: 2N TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 26: Connection Of External Loudspeaker

    Connection of External Loudspeaker ® IP Video Kit is equipped with an integrated 10 W power amplifier of class D. The amplifier output is available on the SPEAKER+ and SPEAKER− terminals. The maximum power is achievable with a 4 Ω loudspeaker only. The higher the loudspeaker impedance, the lower the maximum power output;...

  • Page 27: Connection Of External Microphone

    PoE and 4Ω speaker. Connection of External Microphone ® IP Video Kit is equipped with an input for connection of an external electret microphone on the MIC+ and MIC− terminals. Shielding of the shielded cable is connected to the IN- terminal.

  • Page 28: Connection Of External Audio Source

    Connection to Digital Outputs ® IP Video Kit is equipped with two active 12 V / 600 mA outputs on the OUT1± and OUT2± terminals. The outputs are overload and short-circuit resistant. Warning When you connect a device containing a coil, such as a relay or an electromagnetic lock, it is necessary to protect the intercom against voltage peak while switching off the induction load.

  • Page 29: Connection To Digital Inputs

    Connection to Digital Inputs ® IP Video Kit is equipped with two digital inputs on the IN1± and IN2± terminals. The digital inputs recognise the following two logic levels: log. 0 for voltage under 1.1 V a log. 1 for voltage over 3 V. Keep the voltage polarity to make the function work properly.

  • Page 30: Extending Module Connection

    2.4 Extending Module Connection ® IP Video Kit allows to connect following extending modules: Security Relay Security Relay ® Security Relay (Part No. 9159010) is used for enhancing security between the ® intercom and the connected electric lock. The Security Relay...

  • Page 31: Installation

    HeliosIP/IP Intercom’ terminals. Press the Departure button to activate the output for 5 seconds. Status signalling: Green LED Red LED Status blinking Operational mode Activated output blinking blinking Programming mode – waiting for initialisation blinking Error – wrong code received 2N TELEKOMUNIKACE a.s., www.2n.cz 31/46...
  • Page 32 2.18 or higher it is necessary to reprogram the ® Security Relay using the instructions above. ® FAQ: 2N Security Relay – what it is and how to use it with 2N IP intercom? ® Video Tutorial: Door intercoms 2N Security Relay 2N TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 33 Connection: 2N TELEKOMUNIKACE a.s., www.2n.cz 33/46...

  • Page 34: Device Configuration

    2.5 Configuration Device Configuration ® Configure IP Video Kit using a PC equipped any web browser as follows: Launch your web browser (Internet Explorer, Firefox, etc.). Enter the IP address of your intercom ( http://192.168.1.100/ , e.g.). Log in with username...
  • Page 35 Wait until the red and green LEDs on the device come on simultaneously (approx. 15 s). Wait until the red LED goes off (approx. 5 s). Wait until the green LED goes off and the red LED comes on again (another 5 s). Release the RESET button. 2N TELEKOMUNIKACE a.s., www.2n.cz 35/46...
  • Page 36 Release the RESET button. Caution In case of resetting the factory default settings on a device with a version of firmware 2.18 or higher it is necessary to reprogram the ® Security Relay using the instructions from section 2N TELEKOMUNIKACE a.s., www.2n.cz 36/46...
  • Page 37 Software 2N® IP Eye 1.1.4 2N® Network Scanner 3.0.4 2N TELEKOMUNIKACE a.s., www.2n.cz 37/46...

  • Page 38: Technical Parameters

    12 V, then the output voltage is limited to the supply voltage value. LAN Interface LAN interface count: 2 (LAN1 and LAN2) PoE: 802.3af on LAN1 only Parameters: 10/100BASE-TX with Auto-MDIX, RJ-45 Recommended cabling: Cat-5e or higher Video Interface Video input count: 2 (IN1, IN2) 2N TELEKOMUNIKACE a.s., www.2n.cz 38/46...
  • Page 39 Output current: Typ. 20 mA Output voltage: Up to 12 V Digital Outputs Output count: 2 (OUT1± and OUT2± terminals) Output function: User programmable Output type: Power output with short-circuit protection Output voltage PoE power supply: 10 V DC 2N TELEKOMUNIKACE a.s., www.2n.cz 39/46...
  • Page 40 142 x 98 x 34 mm (Part No. 9154100) 138 x 90 x 26 mm (Part No. 9154101) Weight Up to 280 g (Part No. 9154100) Up to 150 g (Part No. 9154101) Protection class IP20 (Part No. 9154100) IP00 (Part No. 9154101) 2N TELEKOMUNIKACE a.s., www.2n.cz 40/46...

  • Page 41: Supplementary Information

    4. Supplementary Information Here is what you can find in this section: 4.1 Troubleshooting 4.2 Directives, Laws and Regulations 4.3 General Instructions and Cautions 2N TELEKOMUNIKACE a.s., www.2n.cz 41/46...

  • Page 42: Troubleshooting

    4.1 Troubleshooting For the most frequently asked questions refer to faq.2n.cz 2N TELEKOMUNIKACE a.s., www.2n.cz 42/46...
  • Page 43 Europe ® IP Video Kit conforms to the following directives and regulations: Directive 1999/5/EC of the European Parliament and of the Council, of 9 March 1999 - on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity...

  • Page 44: General Instructions And Cautions

    The consumer shall, at its own expense, obtain software protection of the product. The manufacturer shall not be held liable and responsible for any damage incurred as a result of the use of deficient or substandard security software. 2N TELEKOMUNIKACE a.s., www.2n.cz 44/46...

  • Page 45: Electric Waste And Used Battery Pack Handling

    Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or short-circuited either. 2N TELEKOMUNIKACE a.s., www.2n.cz 45/46...
  • Page 46 2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Phone: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz v2.11 2N TELEKOMUNIKACE a.s., www.2n.cz 46/46...

Table of Contents