hit counter code
Download Print this page
Radio Shack 15-1977 Owner's Manual
Radio Shack 15-1977 Owner's Manual

Radio Shack 15-1977 Owner's Manual

A/v selector with composite s-video conversion

Advertisement

Quick Links

#18"5GNGEVQT
YKVJ"%QORQUKVG"5/8KFGQ"%QPXGTUKQP
15-1977
%106'065
Preparation ...................................................... 1
Placing The Selector .................................... 1
Connecting Devices ...................................... 1
Operation ......................................................... 3
Manually Operating the Selector .................. 3
Using the Learning Function ......................... 3
Using the Remote Control
to Operate the Selector ................................ 3
Troubleshooting ............................................... 3
Care ................................................................. 3
Service and Repair .......................................... 4
Specifications ................................................... 4
#
"+/2146#06"
If an icon appears at the end of a paragraph, go
to the box on that page with the corresponding
icon for pertinent information.
— Warning
° ° ° °
. . . .
— Caution
±
— Note
WARNING:
To reduce the risk the of fire or shock hazard, do not expose this product to rain or moisture.
.
.
The lightning symbol is intended to alert
CAUTION
!
you to the presence of uninsulated danger-
ous voltage within this product's enclo-
RISK OF ELECTRIC SHOCK
sure that might be of sufficient magnitude
DO NOT OPEN
to constitute a risk of electric shock. Do
not open the product's case.
CAUTION:
TO REDUCE THE RISK OF
The exclamation symbol is intended to in-
ELECTRIC SHOCK, DO NOT REMOVE
form you that important operating and
COVER OR BACK. NO USER-SERVICE-
!
ABLE PARTS INSIDE. REFER SERVIC-
maintenance instructions are included in
ING TO QUALIFIED PERSONNEL.
the literature accompanying this product.
#
"+/2146#06"
If you place the selector on the top of your TV,
electromagnetic interference from the TV might
distort the sound from any devices connected to
the selector. If this happens, move the selector
away from the TV.
.
"%#76+10"
R
You must use a Class 2 power source that
supplies 9V DC and delivers 500 mA. Its center
tip must be set to negative and its plug must fit
the selector's DC 9V jack. The supplied adapter
meets these specifications. Using an adapter
that does not meet these specifications could
damage the selector or the adapter.
• Always connect the AC adapter to the
selector before you connect it to AC power.
• When you finish, disconnect the adapter from
AC power before you disconnect it from the
selector.
Your RadioShack A/V Selector with
Composite/S-Video Conversion is a time-
saving switch box for your home audio/video
system. The selector lets you connect four
audio/video devices directly to your TV and
VCR. Once connected, each device can be
accessed with the touch of a button or remote
control. This helps to avoid the need to plug
and unplug each device when changing
audio/video sources (for example, switching
from a DVD player to a camcorder or video
game system).
#
#
— Important
— Hint
Input Select Buttons
1–4 — Makes source
selection easy.
24'2#4#6+10
2
.#%+0)
#
You can place the selector on almost any flat
surface. For the best results, do not place it
on top of a TV or other electrical appliance.
%
100'%6+0)
Use stereo audio/video cables with phono
plugs (available at your local RadioShack
store and online at RadioShack.com) to
make all connections. For the best
performance, use high-quality audio/video
cables. Do not use audio cables for video.
The selector's color-coded jacks make it easy
to connect devices to the selector. Yellow
.
jacks are for video, red jacks are for right
audio, and white jacks are for left audio.
1. Connect the sound outputs for each
device to a set of
on the back of the selector.
2. If a device does not have an S-Video
cable , connect its video output to the
selector's
device.
OWNER'S MANUAL — Please read before using this equipment.
LEARN — See
"Using the Learning
Function" on
Page 3.
"6
"5
*'
'.'%614
"&
'8+%'5
jacks
INPUT R/L (1-4)
jack for that
INPUT V (1-4)
©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Two Audio/Video Outputs
connect up to four sources to two different
TVs or stereo VCRs.
Built-in Composite/S-Video Composite
Circuit — lets you convert composite video
(RCA) to S-Video, or S-Video to composite
video.
Built-in Auto-Learning Function
operate the selector with most remote
controls.
Standard Color-Coded Phono Connectors
make connections simple.
Easy Push-Button Selection
quickly set the input source for each TV or
VCR.
Permanent Memory of Learned Codes —
retains learned codes, even if the AC power
fails.
S-Video Jack
transmits the best picture
for your video.
If the device has an S-Video cable ,
connect it to the
INPUT S-VIDEO (1-4
for that device.
#
Do not connect the device's video output
to both
INPUT V (1-4)
jacks.
(1-4)
3. If your TV or monitor does not have an
S-Video cable , connect its video input to
the selector's
OUTPUT V (1
If the TV or monitor has an S-Video
cable , connect it to the
or
jack.
(1
2)
Do not connect the TV or monitor's video
input to both
OUTPUT V (1-2)
OUTPUT S- VIDEO (1-2)
4. Connect the TV or monitor inputs to the
OUTPUT R/L (1-2)
5. Connect the supplied AC adapter's
barrel plug to
DC 9V
adapter's AC plug to a standard AC
. . . .
outlet.
let you
lets you
lets you
) jack
and
INPUT S-VIDEO
or
jack.
2)
OUTPUT S-VIDEO
and
jacks.
jacks.
, then connect the

Advertisement

loading

Summary of Contents for Radio Shack 15-1977

  • Page 1 #18"5GNGEVQT YKVJ"%QORQUKVG"5/8KFGQ"%QPXGTUKQP 15-1977 %106'065 Preparation ... 1 Placing The Selector ... 1 Connecting Devices ... 1 Operation ... 3 Manually Operating the Selector ... 3 Using the Learning Function ... 3 Using the Remote Control to Operate the Selector ... 3 Troubleshooting ...
  • Page 3 12'4#6+10 "1 " " #07#..; 2'4#6+0) '.'%614 1. Turn on the device you want to view. 2. Press on the selector. POWER 3. To view material from the device connected to the jack, press INPUT 1 , press , for , press INPUT 2 INPUT 3...
  • Page 4 Remote Control Average Range ... 20 ft (6.1 m) Dimension (HWD)... 2 Weight ... 35.1 oz (995 g) Specifications are typical; individual units may vary. Specifications are subject to change and improvement without notice. 12/99 Inches (52 152 mm) 15-1977 03A02 Printed in China...