Page 2
This guide is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to third parties in any form without the prior written consent of SAMSUNG Electronics Co., Ltd. TRADEMARKS Product names mentioned in this document may be trademarks and/or registered trademarks of their respective companies.
Do not touch the Do not connect many Pull out the power devices to a single plug when the tightly and fully into UbiCell or power plug outlet. UbiCell is not used the outlet. with wet hands. for a long time or bad...
Page 5
Turn off the power switch and unplug the Do not put heavy materials on the UbiCell. power cable, and then contact the service Failure to do so may cause the damage to the parts of center if unusual sound, smell, or smoke the UbiCell or fire.
Page 6
This is to prevent please contact where the thinner, mosquito malfunctions and It may cause severe UbiCell was purchased or spray, aerosol, reductions in product damage to the parts of the call the Service Center. lubricant, and lifetime.
Page 7
Do not cover the Don’t install the product on unstable the UbiCell. UbiCell. UbiCell near the support. products which release The UbiCell can be Doing so may cause electromagnetic waves This is to protect the damaged. product malfunction such as microwaves, Deleted: product from falling.
Page 9
Install the product in an area Ethernet cable connector accessory and a charger with good ventilation. Install (RJ-45) should be plugged provided or activated by the UbiCell at a distance of before plugging a DC power Deleted: Samsung Electronics. more than 30cm from the cable.
Page 10
GPS state of LED and call Your UbiCell will not be able to antenna around the window. customer service. function if the instruction is violated. If not, GPS antenna can be...
Manager(UCM). About This Guide This user guide provides instructions for the use of UbiCell. Please take the time to study this guide to become familiar with the operation of your UbiCell and the benefits this new UbiCell can provide. Keep this guide handy. You may need to look up instructions for infrequently used features.
The UbiCell is very simple. On one end it has connectors for power and LAN. A third connector, for an external GPS antenna, is not usually needed. On the other end the UbiCell has four LED indicators to let you know its status. Name...
Page 18
UbiCell User Guide If possible, place the UbiCell in a high location such as on top of a book shelf or tall cabinet. For best results place the UbiCell in a room with a window. Make sure your DSL modem or cable modem and broadband router are on and working properly.
Page 19
UbiCell User Guide Connecting an Ethernet Cable Using the Ethernet cable provided, connect one end to the 'WAN' connector on the right- hand end of the UbiCell and connect the other end to an available port on your broadband router: broadband...
Page 20
UbiCell User Guide Connecting the Power Connect the power cable to the 'DC 5 V' connector on the right-hand end of the UbiCell and plug the transformer into an available wall outlet using the cord that comes with it. Turn on the UbiCell by pressing the 'Power' switch just above the 'DC 5 V' connector.
Page 21
The window should not have metal blinds, nor metallic solar film. Plug the antenna cable into the GPS connector on the UbiCell. This connector is normally concealed behind a small rubber flap: External GPS antenna External GPS antenna always should be located indoors.
Page 23
UbiCell User Guide Checking the LED Connect the power cable to the 'DC 5 V' connector on the right-hand end of the UbiCell and plug the transformer into an available wall outlet using the cord that comes with it. Turn on the UbiCell by pressing the 'Power' switch just above the 'DC 5 V' connector.
Page 26
UbiCell User Guide Transmitter/Receiver Specification The specification of the transmitter and receiver of UbiCell is described as follows. The items that are not included in the following table should meet the IS-95A/B, IS-2000 standard. Item Specification Transmission Tx Frequency 1,930~1,990 MHz Channel Bandwidth 1.25 MHz...
Page 27
About 400 g(About 710~720 g if an adapter and cables are included) Environment Standard The temperature, humidity, altitude, and vibration that is proper for operating UbiCell, and the noise and electromagnetic wave caused when UbiCell operates are described as follows Category Specification Size(H ×...
Page 28
‘Temperature’ includes the temperature scope that UbiCell properly operates. b) ‘Noise’ is a criterion that is measured in the place of a distance of 1m from the UbiCell. c) ‘EMI/EMC’ meets the test conditions of FCC, UL, and Telecordia, international organizations.
Page 29
UbiCell User Guide Radio Configuration The Specificaton of UbiCell Radio Configuration Charcteristics is described as follows. Forward Channel Reverse Channel Service Option The Specification of UbiCell Service Option is described as follows. Category Service Option Voice 3, 32768 6, 14...
Page 33
Information in this document is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of SAMSUNG. Information in this document is subject to change without notice.