Quick Installation Guide Unified Concurrent Dual-Band Access Point This document will guide you through the basic installation process for your new D-Link Wireless AC Access Point. DWL-6610AP Documentation also available on CD and via the D-Link Website...
Note: Using a power supply with a different voltage than the one included with the DWL-6610AP will cause damage and void the warranty for this product. *No PSU supplied in EU region, Russia, USA and Canada. To power the units use a D-Link PoE Switch or Injector.
The light will blink when there is traffic going through the port. POWER – When this LED is lit red, the Access Point is booting up. When this LED is lit green, the Access Point is ready. Interfaces Console Port Power Receptor LAN Port (PoE) D-Link DWL-6610AP Quick Install Guide...
Page 5
Power Button (For Power Adapter) Reset Button D-Link DWL-6610AP Quick Install Guide...
To power on the DWL-6610AP, you can use ONE of the following methods: 1. Connect the supplied power adapter, OR 2. Plug one end of your Ethernet cable into the LAN port of the DWL-6610AP and the other end into a port on a PoE switch or injector.
Page 7
Log in to the Unified Wireless Switch Administration Web pages or Wireless Controller Administration Web pages. For the default login information please see Unified Wireless Switch user manual or Wireless Controller user manual. Unified Wireless Switch DWL-6610AP Computer Wireless Controller D-Link DWL-6610AP Quick Install Guide...
Page 8
3. Drill holes in the marked points and the ring. insert the plastic wall anchors. 7. Plug the CAT 5 cable into the LAN 4. Use the supplied screws to attach the port on the Access Point. mounting ring to the wall. D-Link DWL-6610AP Quick Install Guide...
Page 9
Mounting With A Ceiling Bracket Installation 1. Clip two ceiling brackets onto the ceiling 3. Place the DWL-6610AP’s male bracket panels. Make sure both brackets are in in the mounting ring’s female bracket. line with each other. Rotate the DWL-6610AP clockwise to lock it in position.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. D-Link DWL-6610AP Quick Install Guide...
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. D-Link DWL-6610AP Quick Install Guide...
Consulter le manuel d'utilisation. 5. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. D-Link DWL-6610AP Quick Install Guide...
2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DWL-6610AP Quick Install Guide...
Page 14
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med Svenska [Swedish] de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. D-Link DWL-6610AP Quick Install Guide...