Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the LCD monitor between locations with large temperature differences. Choose a site file:///E|/manual/english/150P/safety/safety.htm (1 of 3) [12/13/1999 8:00:05 PM] •...
Page 3
To prevent fire or electrical shock, do not drop the monitor. file:///E|/manual/english/150P/safety/safety.htm (2 of 3) [12/13/1999 8:00:05 PM] RETURN TO TOP OF THE PAGE...
Page 4
Safety & Troubleshooting When moving the monitor, be sure to unplug all power cords in order to avoid injury or damage to the equipment. file:///E|/manual/english/150P/safety/safety.htm (3 of 3) [12/13/1999 8:00:05 PM] RETURN TO TOP OF THE PAGE...
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1024x768, 60Hz. Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC What does "refresh rate"...
Page 6
My Monitor has no power (Power LED does not light) ? What should I do? Make sure the DC Jack in the pedestal is connected to the Monitor. Will the 150P accept an Interlaced signal? No If an Interlace signal is used, the screen displays both odd and even horizontal scanning lines at the same time, distorting the picture.
Standard 15-pin D-Sub and DVI-D connectors and a Macintosh adapter (optional outside of North America) open the 150P up to most PC and workstation users. Handy hot keys on the chin of the 150P make switching between two different video sources a breeze.
640x480, the image on the screen is smaller because it requires fewer pixels. The 150P can expand a low-resolution screen to any desired size including a full screen. In the expansion mode, users have a choice between size and display accuracy.
Can I connect my 150P LCD monitor to any PC, workstation or Mac? Yes, all Philips LCD monitors are fully compatible with standard PC, Mac and workstation. You may need a cable adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for details.
Page 10
Electric and magnetic fields oscillate in a direction perpendicular to the propagation of the light beam. The direction of these fields is called "polarization direction." Normal or non-polarized light has fields in several directions; polarized light has a field in only one direction. file:///E|/manual/english/150P/safety/saf_faq.htm (6 of 9) [12/13/1999 8:00:09 PM]...
Page 11
1024x3 (R, G, B) x 768 pixels and higher resolution may not be available without additional software processing. The panel is designed to optimize display for 65MHz dot clock, one of the standards for XGA displays. Since the vertical/horizontal frequency for this dot clock is 60/48Hz, the file:///E|/manual/english/150P/safety/saf_faq.htm (7 of 9) [12/13/1999 8:00:09 PM]...
Also IPS (In Plane Switching) or MVA (Multi Vertical Aligned) is used for wider viewing angle. The Philips 181AS is using advance IPS Technology. Why is there no flicker on an LCD Monitor? Technically speaking, LCDs do flicker, but the cause of the phenomenon is different from that of CRT monitor -- and has no impact of ease of viewing.
Page 13
FAQs (Frequently Asked Questions) Does the LCD monitor conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 95-99 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment, and recyclability.
Philips dealer. Common Problems Having this problem? No Picture (Power LED not lit) No Picture (Power LED is amber or yellow) Screen says file:///E|/manual/english/150P/safety/saf_troub.htm (1 of 3) [12/13/1999 8:00:10 PM] • FAQs • Common Problems • Imaging Problems •...
Page 15
Image vibrates on the screen Vertical flicker appears Horizontal flicker appears The screen is too bright or too dark file:///E|/manual/english/150P/safety/saf_troub.htm (2 of 3) [12/13/1999 8:00:10 PM] The Auto Function is designed for use on standard Macintosh or IBM-compatible PC running Microsoft properly Windows.
Page 16
Green, red, blue, dark, and white dots remains For further assistance, refer to the distributor. file:///E|/manual/english/150P/safety/saf_troub.htm (3 of 3) [12/13/1999 8:00:10 PM] Consumer Information Centers RETURN TO TOP OF THE PAGE If an image remains in the screen for an extended period...
Safety and Troubleshooting • Troubleshooting TCO '99 Information • TCO '99 : Available on Brilliance 150P, 150B, 140S, and 170B. Congratulations! labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Page 18
® NERGY guidelines for energy efficiency. We recommend you switch off the monitor when it is not in use for quite a long time. file:///E|/manual/english/150P/safety/regs/regulat.htm (2 of 7) [12/13/1999 8:00:11 PM] RETURN TO TOP OF THE PAGE PHILIPS 105P1* PHILIPS...
Page 19
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///E|/manual/english/150P/safety/regs/regulat.htm (3 of 7) [12/13/1999 8:00:11 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 20
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. file:///E|/manual/english/150P/safety/regs/regulat.htm (4 of 7) [12/13/1999 8:00:11 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 21
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. file:///E|/manual/english/150P/safety/regs/regulat.htm (5 of 7) [12/13/1999 8:00:11 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 22
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. Information for UK only file:///E|/manual/english/150P/safety/regs/regulat.htm (6 of 7) [12/13/1999 8:00:11 PM]...
Page 23
Regulatory Information file:///E|/manual/english/150P/safety/regs/regulat.htm (7 of 7) [12/13/1999 8:00:11 PM] If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR. file:///E|/manual/english/150P/safety/saf_other.htm [12/13/1999 8:00:11 PM] • FAQs •...
Page 25
Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips 150P LCD Monitor. It describes the LCD monitor's features, setup, operation and other pertinent information. Its contents are identical to the information in our printed version.
• Frequency range OPTICAL CHARACTERISTICS • Contrast ratio • Brightness • Peak contrast angle • White Chromacity • Viewing Angle (C/R >5) file:///E|/manual/english/150P/product/product.htm (2 of 5) [12/13/1999 8:00:40 PM] 80 MHz 75 ohm 2 kOhm 700m Vpp Separate sync Composite sync...
Page 29
46.875 57.300 49.700 65.000 48.363 75.000 56.476 78.750 60.023 file:///E|/manual/english/150P/product/product.htm (3 of 5) [12/13/1999 8:00:40 PM] <=50ms (typ.) RETURN TO TOP OF THE PAGE 1024 x 768 at 75Hz 1024x768 at 60Hz Mode Resolution IBM VGA 10h 640*350 IBM VGA 3h...
• Power consumption • Temperature (operating) • Relative humidity • System MTBF * These information are subject to change without notice. Signal Pin Assignment file:///E|/manual/english/150P/product/product.htm (4 of 5) [12/13/1999 8:00:40 PM] Power Management Definition H-sync V-sync Power Used ® compliant.
Page 31
DDC Clock DDC Data No connect Views Follow the links to see various views of the monitor and its components. Front View Product Description file:///E|/manual/english/150P/product/product.htm (5 of 5) [12/13/1999 8:00:40 PM] Signal Assignment T.M.D.S. Data1- 10 T.M.D.S. Data1+ T.M.D.S. Data1/3 Shield 12 T.M.D.S.
Front View Product Description Started • Optimizing Performance Accessories (optional) : the Wall Mount Kit Front View file:///E|/manual/english/150P/install/install.htm (1 of 2) [12/13/1999 8:00:40 PM] Installing the USB Hub • Installing the Protective Cover • Connecting to Your PC • Getting •...
Automatically adjust the horizontal position, vertical position, phase and clock setting. Optimizing Performance For best performance, ensure that your display settings are set at 1024x768@60Hz (for 150P) or 1280x768, 60Hz (for 181AS). Note: You can check the current display settings by pressing the OSD "OK" button once.
Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors which allows an end-user to adjust screen performance of monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
Page 35
Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///E|/manual/english/150P/osd/osddesc.htm (2 of 4) [12/13/1999 8:00:41 PM] RETURN TO TOP OF THE PAGE...
Page 36
On-Screen Display RETURN TO TOP OF THE PAGE file:///E|/manual/english/150P/osd/osddesc.htm (3 of 4) [12/13/1999 8:00:41 PM]...
Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
Page 39
A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color,...
Page 40
-power state (< 30 W) either after a period of inactivity or after a predetermined time selected by the user. file:///E|/manual/english/150P/glossary/glossary.htm (2 of 5) [12/13/1999 8:00:42 PM] RETURN TO TOP OF THE PAGE...
Page 41
The controller provides the interface registers to allow communication to/from the host. Hub specific status and control commands permit the host to configure a hub and to monitor and control file:///E|/manual/english/150P/glossary/glossary.htm (3 of 5) [12/13/1999 8:00:42 PM] RETURN TO TOP OF THE PAGE...
Page 42
Upstream ports receive downstream data traffic. Vertical refresh rate Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second. file:///E|/manual/english/150P/glossary/glossary.htm (4 of 5) [12/13/1999 8:00:42 PM] RETURN TO TOP OF THE PAGE...
Page 43
Glossary RETURN TO TOP OF THE PAGE file:///E|/manual/english/150P/glossary/glossary.htm (5 of 5) [12/13/1999 8:00:42 PM]...
Download and Print Download and Print Download and Printing Instructions monitor driver This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe¨...
Page 45
Click on the link or icon to install the driver for this LCD monitor. Click-and-hold your mouse over the icon. (Win95/98 users right-click) Driver (PHILIPS.EXE) Download From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'.
Page 46
Download and Print file:///E|/manual/english/download/download.htm (3 of 3) [12/13/1999 8:00:42 PM]...
TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
Page 49
Philips Pixel Defect Policy RETURN TO TOP OF THE PAGE file:///E|/manual/english/150P/product/pixel.htm (3 of 3) [12/13/1999 8:00:56 PM]...
• Optimizing Performance Accessories (optional) : Installing the USB Hub Wall Mount Kit Accessory Pack Unpack all the parts. file:///E|/manual/english/150P/install/connect.htm (1 of 6) [12/13/1999 8:01:04 PM] • Accessory Pack • Connecting to Your PC • Installing the Protective Cover •...
Page 51
Connecting to Your PC Connecting to Your PC file:///E|/manual/english/150P/install/connect.htm (2 of 6) [12/13/1999 8:01:04 PM] RETURN TO TOP OF THE PAGE Cable (Option only available for models with USB Device) E-DFU package with Quick Setup Guide, Using Your Monitor Manual,...
Page 52
Connecting to Your PC file:///E|/manual/english/150P/install/connect.htm (3 of 6) [12/13/1999 8:01:04 PM] To remove the back cover, use a coin to disengage the clips on each side, then pull from the bottom at lift. Remove the plastic ring from the hinge...
Page 53
Connecting to Your PC file:///E|/manual/english/150P/install/connect.htm (4 of 6) [12/13/1999 8:01:04 PM] Plug in the video cable into VGA or DVI-D connector. Also connect USB and audio cable, if any. Cover the cables with the plastic ring and put the ring back on the hinge...
Page 54
Connecting to Your PC file:///E|/manual/english/150P/install/connect.htm (5 of 6) [12/13/1999 8:01:04 PM] Replace the back cover on the monitor...
Page 55
Plug the power cord of your computer and your monitor into a nearby outlet. Turn on your computer and monitor. If the monitor displays an image, installation is complete. file:///E|/manual/english/150P/install/connect.htm (6 of 6) [12/13/1999 8:01:04 PM] RETURN TO TOP OF THE PAGE...
Display icon. Inside the Display Control Panel, select the "Settings" tab. Under the Settings Tab, in box labeled "desktop area", move the slidebar to 1024x768 pixels (for 150P / 150B) or 1280x1024 pixels (for 181AS). Open "Advanced Properties" and set the Refresh Rate to 60Hz, then click OK.
Page 57
USB Hub supports four down stream ports and one upstream port. With its 12 Mbps; This USB Hub supplement the full-speed and low-speed PC desktop peripherals with plug-and-play capability and user-friendly interface. file:///E|/manual/english/150P/install/usbhub/usb_inst.htm (1 of 4) [12/13/1999 8:01:05 PM] Description of the USB Hub •...
Page 58
Installing Your USB Hub Application Just a few peripherals you can connect to your USB Hub . file:///E|/manual/english/150P/install/usbhub/usb_inst.htm (2 of 4) [12/13/1999 8:01:05 PM] RETURN TO TOP OF THE PAGE...
Page 59
1. Turn off the monitor and unplug the power card 2. Remove the cover of "USB BAY" at the back of the monitor. 3. Insert USB Hub into the slot file:///E|/manual/english/150P/install/usbhub/usb_inst.htm (3 of 4) [12/13/1999 8:01:05 PM] RETURN TO TOP OF THE PAGE...
Page 60
7. The two ends of USB cable attached are different. Plug in the square end into the "upstream" connector of the USB Hub. 8. Plug-in the other end into the USB connector of the PC. file:///E|/manual/english/150P/install/usbhub/usb_inst.htm (4 of 4) [12/13/1999 8:01:05 PM] RETURN TO TOP OF THE PAGE...
Below each of the openings is a clip. Using a medium-sized coin, press in (A) and then twist (B) to disengage the clip in one of the opening. Repeat for the rest of the openings. file:///E|/manual/english/150P/install/p_cover/pcov_inst.htm (1 of 4) [12/13/1999 8:01:05 PM] • Connecting to Your PC •...
Page 62
Installing the Protective Cover Pull up and forward to remove the front bezel from the monitor. file:///E|/manual/english/150P/install/p_cover/pcov_inst.htm (2 of 4) [12/13/1999 8:01:05 PM] Peel off the film on both sides of the protective cover.
Clip the protective cover onto the monitor, engaging only the top two clips. Now press the bottom corners of the protective cover to engage the two side clips. Cleaning Instructions The anti-scratch, anti-reflective cover protects the LCD screen file:///E|/manual/english/150P/install/p_cover/pcov_inst.htm (3 of 4) [12/13/1999 8:01:05 PM] RETURN TO TOP OF THE PAGE...
Page 64
Installing the Protective Cover Cleaning Instructions: Wipe with a soft dry cloth Do not use alcohol solvents or other strong chemical file:///E|/manual/english/150P/install/p_cover/pcov_inst.htm (4 of 4) [12/13/1999 8:01:05 PM] RETURN TO TOP OF THE PAGE...
Front View Product Description Started • Optimizing Performance Accessories (optional) : the Wall Mount Kit Installing the Wall Mount Kit file:///E|/manual/english/150P/install/m_kit/mkit_inst.htm (1 of 4) [12/13/1999 8:01:06 PM] Installing the USB Hub • Installing the Protective Cover • Connecting to Your PC •...
Page 66
Installing Your Wall Mount Kit file:///E|/manual/english/150P/install/m_kit/mkit_inst.htm (2 of 4) [12/13/1999 8:01:06 PM] Detach the monitor base by pulling away the two parts. Fix the mount bracket to the desired location.
Page 67
Installing Your Wall Mount Kit file:///E|/manual/english/150P/install/m_kit/mkit_inst.htm (3 of 4) [12/13/1999 8:01:06 PM] Thread all cables through the hole at the bottom of the bracket and use the clip provided to hold them in place. Slide the support pin at the...
Page 68
Installing Your Wall Mount Kit file:///E|/manual/english/150P/install/m_kit/mkit_inst.htm (4 of 4) [12/13/1999 8:01:06 PM] RETURN TO TOP OF THE PAGE Connect the AC power adaptor provided to the DC-IN cable, and connect all other cables to the computer.
Page 69
… to continue to the MAIN CONTROLS, follow the steps under VOLUME. Note: You can also adjust the brightness from the MAIN CONTROLS window. See BRIGHTNESS & CONTRAST for details. file:///E|/manual/english/150P/osd/osd_cont.htm (1 of 20) [12/13/1999 8:01:22 PM] • The OSD Tree •...
Page 70
The VOLUME window appears. 4) Press the button to decrease or increase the volume level. 5) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (2 of 20) [12/13/1999 8:01:22 PM]...
Page 71
2) Press the button again. The LANGUAGE window appears. 3) Press the button until the desired language is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (3 of 20) [12/13/1999 8:01:22 PM] button until LANGUAGE is highlighted. button. RETURN TO TOP OF THE PAGE button on the monitor until LANGUAGE is highlighted)
1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until ADJUST POSITION is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (4 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE button until ADJUST POSITION...
Page 73
5) Press the button until ADJUST VERTICAL is highlighted. Press the image up or down until it appears centered. file:///E|/manual/english/150P/osd/osd_cont.htm (5 of 20) [12/13/1999 8:01:22 PM] button to move the...
1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until BRIGHTNESS & CONTRAST is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (6 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE button until...
Page 75
An 80% brightness is recommended. 5) When finished with BRIGHTNESS, press the button to adjust the contrast. A 100% contrast is recommended. file:///E|/manual/english/150P/osd/osd_cont.htm (7 of 20) [12/13/1999 8:01:22 PM] button until CONTRAST is highlighted. Next, press the...
The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until VIDEO NOISE is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (8 of 20) [12/13/1999 8:01:22 PM] button until VIDEO NOISE is button. RETURN TO TOP OF THE PAGE...
Page 77
The VIDEO NOISE window appears. PHASE is highlighted. 4) Press the button to adjust the phase. 5) When finished with PHASE, press the button to adjust the clock. file:///E|/manual/english/150P/osd/osd_cont.htm (9 of 20) [12/13/1999 8:01:22 PM] button until CLOCK is highlighted. Next, press the...
The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until ADJUST COLOR is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (10 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE (not available on all models)
Page 79
The OSD Controls 3) Press the button. The ADJUST COLOR window appears. 4) Press the button to select ORIGINAL PANEL COLOR, 9300K FOR CAD/CAM, 6500K FOR IMAGE MANAGEMENT, or USER PRESET. file:///E|/manual/english/150P/osd/osd_cont.htm (11 of 20) [12/13/1999 8:01:22 PM]...
Page 80
CLOSE MAIN CONTROLS is highlighted. 6a) If USER PRESET is highlighted, press the button to adjust the color red. file:///E|/manual/english/150P/osd/osd_cont.htm (12 of 20) [12/13/1999 8:01:22 PM] button to confirm your selection and return to the MAIN CONTROLS button to highlight RED. Next, press the...
You can place the MAIN CONTROLS window almost any place on the screen that is convenient for you. OSD SETTINGS allows you to do this. It is composed of HORIZONTAL and VERTICAL adjustments you file:///E|/manual/english/150P/osd/osd_cont.htm (13 of 20) [12/13/1999 8:01:22 PM] button to highlight GREEN. Next, press the button to highlight BLUE.
Page 82
MAIN CONTROLS window left or right to the desired position. 5) Press the button until VERTICAL is highlighted. Press the CONTROLS window up or down to the desired position. file:///E|/manual/english/150P/osd/osd_cont.htm (14 of 20) [12/13/1999 8:01:22 PM] button to move the MAIN...
Page 83
1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until PRODUCT INFORMATION is highlighted. file:///E|/manual/english/150P/osd/osd_cont.htm (15 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE button until PRODUCT...
Page 84
RESET TO FACTORY SETTINGS is highlighted. Next, start with step 3 under RESET TO FACTORY SETTINGS and follow the directions. … to exit completely, press the file:///E|/manual/english/150P/osd/osd_cont.htm (16 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE...
Smart Help After returning to MAIN CONTROLS… Smart … to continue to INPUT SELECTION, press the Help is highlighted. Next, start with step 3 under INPUT SELECTION and follow the file:///E|/manual/english/150P/osd/osd_cont.htm (17 of 20) [12/13/1999 8:01:22 PM] button until INPUT SELECTION...
2) Press the button until INPUT SELECTION is highlighted. 3) Press the button. The INPUT SELECTION window appears. 4) Press the button to select either ANALOG or DIGITAL. file:///E|/manual/english/150P/osd/osd_cont.htm (18 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE...
Page 87
MAIN CONTROLS window. CLOSE MAIN CONTROLS is highlighted. Smart Help After returning to MAIN CONTROLS… Smart … to exit completely, press the Help Close Main Controls file:///E|/manual/english/150P/osd/osd_cont.htm (19 of 20) [12/13/1999 8:01:22 PM] button. RETURN TO TOP OF THE PAGE...
Page 88
The OSD Controls RETURN TO TOP OF THE PAGE file:///E|/manual/english/150P/osd/osd_cont.htm (20 of 20) [12/13/1999 8:01:22 PM]...
Page 89
Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.
12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.
Page 91
Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local...
Page 92
Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
Page 93
Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.
Philips Representation Office Ul. Usacheva 35a 119048 Moscow Phone: 095-755 6900 Fax : 095-755 6923 TURKEY Türk Philips Ticaret A.S. Talatpasa Caddesi No 5. 80640-Gültepe/Istanbul Phone: (0800)-211 40 36 Fax : (0212)-281 1809 file:///E|/manual/english/warranty/warcic.htm (1 of 8) [12/13/1999 8:02:35 PM] •...
Page 96
Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio Calle 13,No 51-39 Apartado 4282, Bogota Phone: (01)-6235511/ 9800-18971 (toll free) Fax : (01)-6234399...
Page 97
Consumer Information Centers PARAGUAY Philips del Paraguay S.A. Avenida Artigas 1519 Casilla de Correos 605 Asuncion Phone: (021)-211666 Fax : (021)-213007 PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2412890 Fax : (01)-2412913 URUGUAY Ind.Philips del Uruguay S.A.
Page 98
Customer Information Centre. 3 Figtree Drive Homebush Bay NSW 2140 Phone: (02)-131391 Fax : (02)-97644681 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 658 224 (toll free) Fax : (09)-8497858...
Page 99
Consumer Information Centers Phone: (021)-63511263 Fax : (021)-63510799 Philips Authorized Service Centre Consumer Information Centre 148 Fu Jian Road M 200001 Shanghai Phone: (02)-812909 Fax : (02)-813062 HONG KONG Philips Hong Kong Limited Consumer Information Centre 16/F Hopewell Centre 17 Kennedy Road, WANCHAI...
Page 100
Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 Fax : (021)-7940080 JAPAN Philips Consumer Electronics 1-11-9,Ebisuminami Shibuya-Ku Tokyo 150 Phone: (03)-3719-2235 Fax : (03)-3715-9992 KOREA Philips Korea Ltd.
Page 101
Consumer Information Centers PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-8100161 Fax : (02)-8173474 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340 Singapore 1231 Phone: 3502000...
Page 102
Consumer Information Centers Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-353666 Fax : (04)-353999 EGYPT Philips Egypt Consumer Information Centre 10, Abdel Rahman El Rafei Mohandessin - Cairo, P.O.Box 242 DOKKI Phone: (02)-3313993 Fax : (02)-3492142 file:///E|/manual/english/warranty/warcic.htm (8 of 8) [12/13/1999 8:02:35 PM]...