Page 1
Quick Install Guide Full HD Mini Pan & Tilt Dome Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-5615 Quick Installation Guide Installationsanleitung Guide d’installation Guía de instalación Guida di Installazione Краткое...
This install guide provides basic instructions for installing the DCS-5615 Network Camera. For additional information about how to use the camera, please see the User Manual, which is available on the CD included in this package or from the D-Link Support website.
2. Hardware Overview Housing Pan -180° Pan +180° Tilt 80° D-Link DCS-5615 Quick Install Guide...
Page 4
Ethernet Jack power adapter to power digital signals from a variety of RJ-45 connector is for Ethernet, the camera external devices and can also be used to power the camera using Power over Ethernet D-Link DCS-5615 Quick Install Guide...
Slip the card socket forward and up. Insert a microSD card, close the the cover, and push it back to secure the installation. Install the plastic cover by pressing it back to its original position. D-Link DCS-5615 Quick Install Guide...
Page 6
Insert the supplied plastic anchors into the drilled holes, and install “Plate A” with three screws. Attach “Plate B" to the bottom of the camera and secure it with two screws. Slide the Camera into “Plate A“ Secure the camera to the “Plate A” with screw. Plate A D-Link DCS-5615 Quick Install Guide...
Page 7
Plate B D-Link DCS-5615 Quick Install Guide...
Page 8
Connection with a PoE Switch If using a PoE switch, connect the network camera to the switch via an Ethernet cable, which will enable the transmission of both power and data over a single cable. D-Link DCS-5615 Quick Install Guide...
Insert the DCS-5615 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
Page 10
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC Address and IP Address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed.
CD-ROM or the D-Link Support website. Additional Information Additional help is available through our offices listed at the back of the User’s Guide or online. To know more about D-Link products or marketing information, please visit the website http://www.dlink.com. Warranty Information Please visit http://warranty.dlink.com/ for warranty information for your region.