Make sure that you create recovery media by using Recovery Media
Creator instead of the recovery drive creating option in Windows system.
Otherwise, Recovery Media Creator will not work and TOSHIBA HDD
Recovery option in TOSHIBA Maintenance Utility will not exist if you
restore the computer from the recovery media you created by options in
Windows system.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:
1.
2.
3.
4.
5.
If you have previously chosen to remove the recovery partition and are
trying to create "Recovery Media", the following message apppears: "The
Recovery Media Creator can not be launched because there is no recovery
partition."
When there is no recovery partition, the Recovery Media Creator cannot
make Recovery Media.
User's Manual
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the computer to TOSHIBA Keyboard Dock before
restoring the operating system.
When you reinstall the Windows operating system, the internal storage
will be reformatted and all data will be lost.
Load the Recovery Media into the external optical disc drive or insert
the recovery USB Flash Memory into one available USB port.
Click Start -> Power and then select Restart.
Hold down the F12 key (by pressing FN + "labelled letter key") and
then release this key one second after the computer is power on.
You can hold down the Volume up button until the Boot menu is
loaded.
Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media.
You can also use the Volume up and the Volume down button on the
computer to select the appropriate option from the menu, and press
the Windows button to confirm the selection.
A menu is displayed from which you should follow the on-screen
instructions.
2-18