Makita BTP131 Instruction Manual
Cordless 4 mode impact driver
Hide thumbs
Also See for BTP131:
- User manual ,
- Instruction manual (84 pages) ,
- Technical information (18 pages)
Related Manuals for Makita BTP131
Summary of Contents for Makita BTP131
- Page 1 INSTRUCTION MANUAL Cordless 4 Mode Impact Driver BTP131 BTP141 012232 IMPORTANT: Read Before Using.
-
Page 2: Specifications
The typical A-weighted noise level determined according The following show the symbols used for the equipment. to EN60745: Be sure that you understand their meaning before use. Read instruction manual. Model BTP131 Sound pressure level (L ) : 85 dB(A) Only for EU countries Ni-MH... -
Page 3: General Power Tool Safety Warnings
Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: reduce risk of electric shock. - Page 4 Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 17. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord.
- Page 5 ENC007-7 Service 28. Have your power tool serviced by a qualified IMPORTANT SAFETY repair person using only identical replacement INSTRUCTIONS parts. This will ensure that the safety of the power tool is maintained. FOR BATTERY CARTRIDGE 29. Follow instruction lubricating changing accessories.
-
Page 6: Functional Description
Charge the battery cartridge once in every six conditions: months if you do not use it for a long period of Overloaded: • time. The tool is operated in a manner that causes it to draw an abnormally high current. FUNCTIONAL DESCRIPTION In this situation, release the trigger switch on the tool and stop the application that caused... -
Page 7: Speed Change
Speed change 1. LED display 2. Lamp button 1. Speed change lever 012249 Every time the lamp button on the LED display is 012240 pressed, the lamp status is alternatively changed from NOTICE: the ON to the OFF and from the OFF to the ON. Always set the speed change lever fully to the •... - Page 8 2. Hard 3. Medium 4. Soft 5. Control button 012244 Maximum blows Impact force grade Work Application displayed on panel BTP131 BTP141 Hard 3,200 3,200 Tightening when force Tightening in underwork (min ) (min ) and speed are desired. material/ Tightening long screws/ Tightening bolts.
- Page 9 If the number is not indicated, light flashes once per second for one minute, and contact your nearest Makita service center. then the LED display goes off. In this case, cool When the remaining battery capacity gets low in down the tool before operation.
- Page 10 inserted into the sleeve with its pointed end facing ASSEMBLY in. Then release the sleeve to secure the bit. 1. Bit CAUTION: 2. Bit-piece Always be sure that the tool is switched off and the • 3. Sleeve battery cartridge is removed before carrying out any work on the tool.
-
Page 11: Operation
OPERATION Standard bolt (kgf cm) (1224) (1020) 012242 CAUTION: (816) Always insert the battery cartridge all the way until (M14) • it locks in place with a little click. If you can see the (612) red indicator on the upper side of the button, it is (M12) not locked completely. - Page 12 If the tool repeating this several times, the hole will be cleaned out does not work properly, contact your nearest and normal drilling may be resumed. Makita service center. Hold the tool pointed straight at the screw. Drilling mode " " •...
-
Page 13: Maintenance
(mm) attachment for its stated purpose. 2.0 - 2.2 If you need any assistance for more details regarding 2.2 - 2.5 these accessories, ask your local Makita Service Center. 2.5 - 2.8 2.9 - 3.2 Screw bits • 3.1 - 3.4 Hook •... - Page 16 Makita Corporation Anjo, Aichi, Japan www.makita.com 885074A226...