INSTALLATION / CONNECTION How to read this manual • Operations are explained mainly using buttons on the faceplate of KD-X330BT. • English indications are used for the purpose of explanation. You can select the display language from the menu. ( 4) •...
BASICS Faceplate Remote control (RM-RK52) Attach Remote sensor (Do not expose to bright sunlight.) Volume knob Display window Detach Pull out the insulation sheet How to reset when using for the first time. Detach button How to replace the battery Press the switch twice within 5 seconds after detaching the faceplate.
F/W xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). Turn the volume knob to make the settings, then press For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>. the knob. Day Hour Minute FACTORY RST YES: Resets the settings to default (except the stored station). ; NO: Cancels.
Do not leave the cable inside the car when not using. When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.
“ST” lights up when receiving an FM stereo broadcast with sufficient AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY signal strength. application installed in the Android device. AUDIO MODE: Control Android device using the Android device itself via other media player applications installed in the Android device.
RADIO Select a stored station LOCAL SEEK ON: Searches only AM/SW1/SW2 stations with good reception. ; OFF: Cancels. Press one of the number buttons (1 to 6). • Settings made are applicable only to the selected source/station. Once (or) you change the source/station, you need to make the settings again. Press Turn the volume knob to select a preset number, then press the IF BAND...
Page 8
Pandora® (Applicable for Australia or New Zealand models only) Preparation: Create and save a new station Install the latest version of the Pandora application on your device Press (iPhone/ iPod touch), then create an account and log in to Pandora. Turn the volume knob to select [NEW STATION], then press the knob.
Pair and connect a Bluetooth device for the first time Supported Bluetooth profiles Press to turn on the unit. Search and select “JVC UNIT” on the Bluetooth device. – Hands-Free Profile (HFP) “BT PAIRING” flashes on the display. – Advanced Audio Distribution Profile (A2DP) •...
Page 10
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 11) – [AUTO CNNCT] is set to [ON]. ( 13) During a call: – JVC MUSIC PLAY application is installed on • The buttons stop blinking. the Android device ( 5) and [AUTO MODE] is •...
Page 11
BLUETOOTH® Default: XX On the faceplate On the remote control MIC LEVEL –10 — +10 (–4): The sensitivity of the microphone increases While talking on the first incoming call... as the number increased. Answer another incoming ( Not available ) Press or the volume NOISE RDCT –5 — +5 (0): Adjust the noise reduction level until the least call and hold the current...
Page 12
BLUETOOTH® Make a call using voice recognition Make a call Press and hold to activate the connected phone. You can make a call from the call history, phonebook, or dialing the number. Speak the name of the contact you want to call or the voice Call by voice is also possible if your mobile phone has the feature.
Page 13
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time. pairing has been deleted, and the unit exits check mode. JVC Smart Music Control is designed to view JVC car receiver status and perform simple control • To cancel, press and hold to turn off the power, operations on Android smart phones.
Page 14
BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) Open the Pandora application on your device. Audio player via Bluetooth Connect your Bluetooth audio player via Press...
AUDIO SETTINGS Use a portable audio player Connect a portable audio player (commercially available). 3.5 mm stereo mini plug with “L” shaped connector (commercially available) Select a preset equalizer Press repeatedly. Portable audio player Auxiliary input jack (or) Select [ON] for [AUX] in [SRC SELECT]. ( 4) Press , then turn the volume knob within 5 seconds.
Page 16
AUDIO SETTINGS Default: XX AUDIO EQ SETTING BASS BOOST +01 — +05: Selects your preferred bass boost level. ; OFF: Cancels. EQ PRESET Select a preset equalizer suitable to the music genre. (Select [USER] to use LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced the settings made in [EASY EQ] or [PRO EQ].) sound at low volume. ;...
Page 17
AUDIO SETTINGS Speaker output settings SPK/PRE OUT (Not applicable when 3-way crossover is selected.) Depending on the speaker connection method, select the appropriate (Only for X ' OVER 2-WAY) setting to get the desired output. ( Speaker output settings) Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method.
Page 18
AUDIO SETTINGS 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and SPK SIZE 3-way crossover. FRONT SIZE 8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6"/ Caution 5×7"/ 6×8"/ 6×9"/ 7×10" Select a crossover type according to how the speakers are TWEETER SML/ MID/ LRG/ NONE (not connected) ( ...
• Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit. More information Visit also the following website <http://www.jvc.net/cs/car/> for: About Android device – Latest firmware updates and latest compatible item list •...
TROUBLESHOOTING REFERENCES Change the display information Symptom Remedy Each time you press , the display information changes. Sound cannot be heard. • Adjust the volume to the optimum level. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other •...
Page 22
( 20) “LICENSE ERR” You try to access from a country which Pandora is not Cannot playback at • Make sure JVC MUSIC PLAY APP is installed on the deliverable. [AUTO MODE]. Android device. ( 5) •...
Page 23
• Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
SPECIFICATIONS FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step) USB Standard USB 1.1, USB 2.0 (Full speed) Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Compatible Devices Mass storage class Quieting Sensitivity 17.2 dBf (2.0 μV/75 Ω) File System FAT12/ 16/ 32 (DIN S/N = 46 dB) Maximum Supply Current DC 5 V 1.5 A Frequency Response (±3 dB) 30 Hz —...
INSTALLATION / CONNECTION SPECIFICATIONS Warning Version Bluetooth Ver.2.1+EDR/ Bluetooth 3.0 • The unit can only be used with a 12 V DC power supply, negative ground. Frequency Range 2.402 GHz — 2.480 GHz • Disconnect the battery’s negative terminal before wiring and mounting. •...
Page 26
Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (B) Trim plate Do the required wiring. ( 27) Hook on the top side Dashboard of (C) Mounting sleeve (D) Wiring harness Orientate the trim your car plate as illustrated before fitting.
We recommend installing the unit with a (not supplied) commercially available custom wiring harness specific Front/ Rear/Subwoofer output JVC Amplifier * for your car and leave this job to professionals for your For 3-way crossover: Mid Range/ Woofer output safety. Consult your car audio dealer.
Page 49
• The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. ไทย...
Page 60
• Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
Page 86
• Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.