Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
Í [
COLOUR CCD Camera
CCD-Farbkamera
Caméra CCD COULEUR
C CD
½ ú T
About this manual
• Before installing and using the camera, please
read this manual carefully. Be sure to keep it
handy for later reference.
• This manual gives basic connections and
operating instructions for 2 PAL models
(VCC-7912P, 7812P).
À propos de ce manuel
• Avant d'installer et d'utiliser la caméra, veuillez
lire ce manuel attentivement. Gardez-le à
portée de main pour toute référence ultérieure.
• Ce manuel couvre les branchements et
instructions pour l'utilisation de base pour 2
modèles de format PAL (VCC-7912P et 7812P).
VCC-7912P
VCC-7812P
Über diese Bedienungsanleitung
• Lesen Sie bitte vor der Montage und dem
Inbetriebnehmen der Kamera zuerst diese
Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen
auf.
• In dieser Anleitung finden Sie die Anschlüsse
und die Grundbedienung für 2 PAL-Modelle
(VCC-7912P und 7812P)
P [
•
- Í ½ ú T \ ä =
[ t
•
[ ,
2
PAL
7812P)
Í
Í [
T
(VCC-7912P,
- Ý
Advertisement
Table of Contents
Related Manuals for Sanyo VCC-7912P
Summary of Contents for Sanyo VCC-7912P
- Page 1 Í [ portée de main pour toute référence ultérieure. • • Ce manuel couvre les branchements et [ , (VCC-7912P, instructions pour l’utilisation de base pour 2 7812P) - Ý modèles de format PAL (VCC-7912P et 7812P).
-
Page 2: Table Of Contents
• Power supply: 12 V DC operation SPECIFICATIONS ..........9 (supplied AC adaptor) • Built in Vari-focal auto iris lens. – Model VCC-7912P: f= 2.6 ~ 5.6 mm ACCESSORIES – Model VCC-7812P: f= 4.0 ~ 8.0 mm AC adaptor........1 pc. AC adaptor mounting plate .... 1 pc. -
Page 3: Precautions
Disconnect or where it could be subject to direct the power cord immediately, and consult sunlight, as that could cause deformation, your dealer (or a Sanyo Authorized Service discoloration or other damages. Centre). Be careful when installing close to the... -
Page 4: Parts Names
PARTS NAMES Video output connector (VIDEO OUT: BNC type) Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 12 V DC input terminal (12 V DC IN) Connect DC connecting cord from the AC adaptor to the 12 V DC IN terminal on the camera. -
Page 5: Power Source
Camera setup section (under the cover) This unit factory settings are as indicated below. However, if due to installation conditions or environment the settings may need to be modified for best results (see "SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover. -
Page 6: Connections
CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. Make the video signal connection between the camera and the monitor or time lapse VCR. Turn on the power of all the devices connected to the camera. -
Page 7: Settings
SETTINGS VR401 VR403 VR402 Table A High speed electronic shutter setting 1/50 sec. Normally, the speed setting switches for the high speed electronic shutter are all set to the OFF position. This sets the electronic shutter speed to 1/50 sec. The switches can be set as indicated in 1/120 sec. -
Page 8: Lens Adjustments
SETTINGS Backlight compensation setting Set the BLC switch to the ON position, to engage the backlight compensation function. Note: You will need to set the LEVEL (VR401) volume when shooting in the conditions described below. L (counterclockwise): To decrease the contrast VR401 H (clockwise): To increase the contrast •... -
Page 9: Troubleshooting
TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Centre. No picture on the monitor screen •... -
Page 10: Specifications
SPECIFICATIONS Camera: Scanning system : PAL standard (625 TV lines, 25 frames/sec.) Interlace : PLL 2:1 interlace Image device : 1/3 inch solid state image device CCD Picture elements : 537 (H) x 597 (V) Effective picture elements : 500 (H) x 582 (V) Synchronizing system : Internal sync/External sync (Automatic switching) Resolution : 330 TV lines horizontally, 400 TV lines vertically Video output level : 1.0 Vp-p/75 ohms, composite... - Page 11 Dimensions: mm 41.5 95.5 VIDEO OUT VBS IN POWER 12V DC IN À 1/4”–20 UNC Approx. 1.8 m Approx. 1.8 m : mm Features and specifications are subject to change without prior notice or obligations. English...
- Page 12 1AC6P1P1908-- SANYO Electric Co., Ltd. L53J2/XE, L53J2/XE2 (0798SI) Printed in Japan...