Page 1 DVD/CD RECEIVER KD-ADV6270/KD-DV6200 RECEPTOR CON DVD/CD KD-ADV6270/KD-DV6200 RECEPTEUR DVD/CD KD-ADV6270/KD-DV6200 For canceling the display demonstration, see page 5. Para cancelar la demostración en pantalla, consulte la página 5. Pour annuler la démonstration des affichages, référez-vous à la page 5. For installation and connections, refer to the separate manual.
Page 2 – Consult the dealer or an experienced radio/ TV technician for help. How to forcibly eject a disc Caution: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. “PLEASE” and “EJECT” appear alternately on the display. IMPORTANT FOR LASER PRODUCTS 1.
Page 3: Table Of Contents
WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 4: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 5 Before operating the unit — Cancel the display demonstration and set the clock • See also page 28. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 6: [Within 5 Seconds
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = SIRIUS* = XM* = DISC* = USB* = • Turn off the power [Hold]. CD-CH*/IPOD*/D.PLAYER* (or EXT IN) = LINE IN = • Attenuate the sound (if the power is on). (back to the beginning) •...
Page 7: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./Track Main display No./Folder No./Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Equalizer indicator Playback mode/item indicators Disc type indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 8 MONITOR CONTROL • 5 / ∞ Monitor control buttons ∞: Pauses/stops or resumes playback. • Used for a JVC monitor—KV-MR9010, 5: Enters the main menu. KV-MH6510, or KV-M706. (Now 5/∞/4 / ¢ work as the menu selecting buttons.)* DVD/RECEIVER CONTROL •...
Page 9: To Select A Number Greater Than
• Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
Page 10: Listening To The Radio
Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 33. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Page 11: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 12 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 13 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 15 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
Page 16 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 17 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 18 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 19: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 20: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 21: Listening To The Satellite Radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio. • XMDirect Universal Tuner Box—Using a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio.
Page 22 * Only for SIRIUS Satellite radio Change the display information Select preset channel. Select “SIRIUS” or “XM.” Ÿ Select the bands. SIRIUS: Select a category. ⁄ Select a channel to listen. • Holding the button changes the channels rapidly. • SIRIUS: If you select “ALL” in step !, you can tune in to all the channels of all categories. If you do not select a channel within 15 seconds, category selected in step ! is canceled.
Page 23: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 24: Listening To The Other External Components
Unit ”EXT IN” setting) SIRIUS Satellite radio (JVC PnP) JVC CD changer, [20] CD changer jack SIRIUS Satellite radio (JVC DLP), [21] XM Satellite radio, [21] (see page 29 of the ”EXT IN” setting) Apple iPod, [23] JVC D. player, [23]...
Page 25: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 26: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 00 00 +01 +02 +01 CLASSIC +01 +03 +01 00 00 +02 00 POPS 00 +02 00...
Page 27: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 FAD* Adjust the front and rear speaker balance.
Page 28 Indication Item Setting, [reference page] DEMO • DEMO ON [Initial] : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [5]. • DEMO OFF : Cancels. CLOCK H 1 – 12 : See also page 5 for setting. Hour adjustment [Initial: 1 (1:00)] CLOCK M...
Page 29 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], a JVC compatible satellite External input (SIRIUS/XM), [21], or an Apple iPod/a JVC D. player, [23]. • EXT IN : To use any other external component than the above, [24].
Page 30: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
Page 31 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 32 Language codes Code Language Code Language Code Language Code Language Afar Galician Macedonian Somali Abkhazian Guarani Malayalam Albanian Afrikaans Gujarati Mongolian Serbian Ameharic Hausa Moldavian Siswati Arabic Hindi Marathi Sesotho Assamese Croatian Malay (MAY) Sundanese Aymara Hungarian Maltese Swahili Azerbaijani Armenian Burmese Tamil...
Page 33: Assigning Names To The Sources
Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
Page 34: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. connectors. If a disc does become dirty, wipe it To minimize this possibility, periodically wipe with a soft cloth in a straight line the connectors with a cotton swab or cloth from center to edge.
Page 35: More About This Unit
More about this unit Ejecting a disc General Turning on the power • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted • By pressing SRC on the unit, you can also again into the loading slot to protect it from turn on the power.
Page 36 <.divx> or <.avi>. Satellite radio • This unit can display a unique registration • You can also connect the JVC SIRIUS radio code—DivX Video on Demand (DRM— PnP (Plug and Play), using the JVC SIRIUS Digital Rights Management). For activation radio adapter, KS-U100K (not supplied) to and more details, visit <www.divx.com/vod>.
Page 37 JVC web site: DVD: Appears at the beginning of a scene For iPod users: <http://www.jvc.co.jp/ containing: english/car/support/ks-pd100/index.html> : Multi-subtitle languages For D. player users: <http://www.jvc.co.jp/ : Multi-audio languages english/car/support/ks-pd500/index.html> : Multi-angle views Title assignment Playback • If you try to assign titles to more than 30 Pause station frequencies or 30 CDs, “NAMEFULL”...
Page 38 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 31). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
Page 39: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 40 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 41 Symptom Remedy/Cause • “CHECK” keeps flashing on the display. • Readout time varies depending on the USB memory. • Do not use too many hierarchy and folders. • Turn off the power then on again. • “NO FILE” flashes on the display. Attach a USB memory that contains tracks encoded in an appropriate format.
Page 42 Symptom Remedy/Cause • “CALL 1-888-539-SIRIUS TO SUBSCRIBE” Starts subscribing to SIRIUS Satellite radio (see page 21). scrolls on the display while listening to the SIRIUS Satellite radio. • No sound can be heard. “UPDATING” appears The unit is updating the channel information and it takes a on the display.
Page 43 Symptom Remedy/Cause • The iPod or D. player does not turn on or does • Check the connecting cable and its connection. not work. • Change the battery. • Update the firmware version. • Buttons do not work as intended. The functions of the buttons have been changed.
Page 44: Specifications
Audio Output Level: Digital (DIGITAL OUT: Optical): Signal wave length: 660 nm Output level: –21 dBm to –15 dBm Line-Out Level/Impedance: KD-ADV6270: 5.0 V/20 kΩ load (full scale) KD-DV6200: 2.5 V/20 kΩ load (full scale) Output Impedance: 1 kΩ Subwoofer-out Level/Impedance: KD-ADV6270: 2.5 V/20 kΩ...
Page 45 Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz: 16 Hz to 22 000 Hz DVD, fs=96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio:...
Page 46 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...
Page 47: Connexion Des Enceintes
NEGATIVA. Si su vehículo no posee continu de 12 V à masse NEGATIVE. Si votre véhicule n’offre pas ce voltage inverter is required, which can be purchased at JVC car audio este sistema, será necesario un inversor de tensión, que puede ser type d’alimentation, il vous faut un convertisseur de tension, que vous...
Page 48: Localizacion De Averias
Lista de piezas para instalación y conexión Liste des pièces pour l’installation et raccordement If any item is missing, consult your JVC car audio dealer Si hay algún elemento faltante, consulte inmediatamente con su immediately. concesionario de JVC de equipos de audio para automóviles.
Page 49 JVC car audio dealer or a company supplying kits. instalación, consulte con su concesionario de JVC de equipos de audio d’installation, consulter votre revendeur d’autoradios JVC ou une •...
Page 50 Pour vérifier le fonctionnement de cet appareil avant To cellular phone system—only for KD-ADV6270 Marrone installation, ce fil doit être raccordé, sinon l’appareil ne peut Al sistema de teléfono celular—sólo para KD-ADV6270 pas être mis sous tension. Al cellulare—seulement pour le KD-ADV6270 Light green...
Page 51 Los cables de los altavoces de esta unidad les à l’amplificateur. Laissez les fils d’enceintes de cet unused. quedan sin usar. – KD-ADV6270: appareil inutilisés. – KD-ADV6270: – KD-ADV6270: You can switch off the built-in amplifier and send the audio Podrá...
Page 52 Connecting the external components / Conexión de los componentes externos / Connexion des appareils extérieurs JVC CD changer, SIRIUS Satellite radio, XM Satellite radio, Apple iPod®, or JVC D. player / Cambiador de CD de JVC, radio satelital SIRIUS, radio satelital XM, iPod®...
Page 53 DVD/CD RECEIVER DVD-/CD-RECEIVER RECEPTEUR DVD/CD DVD/CD-RECEIVER KD-DV6202/KD-DV6201 For canceling the display demonstration, see page 5. Zum Abbrechen der Displaydemonstration siehe Seite 5. Pour annuler la démonstration des affichages, référez-vous à la page 5. Zie bladzijde 5 voor het annuleren van de displaydemonstratie. For installation and connections, refer to the separate manual.
Page 54 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 55 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 56: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 57 Before operating the unit — Cancel the display demonstration and set the clock • See also page 29. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 58: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DAB* =DISC* = USB* = • Turn off the power [Hold]. CD-CH*/IPOD*/D.PLAYER* (or EXT IN) = LINE IN = • Attenuate the sound (if the power is on). (back to the beginning) •...
Page 59: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./Disc No./ Track information indicators Main display Chapter No./Channel No. (Time, menu, playback information) RDS indicators Dual Zone indicator Loudness indicator Track indicator Equalizer indicator Playback mode/item indicators Disc type indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 60 /JVC D. player MONITOR CONTROL operations: Monitor control buttons • 5 / ∞ • Used for a JVC monitor—KV-MR9010, ∞: Pauses/stops or resumes playback. KV-MH6510, KV-M706, or KV-M705. 5: Enters the main menu. (Now 5/∞/4 / ¢ work as the DVD/RECEIVER CONTROL menu selecting buttons.)*...
Page 61 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 15 and 16). • DVD-Video/DivX: Shows disc menu. •...
Page 62: Listening To The Radio
Listening to the radio Change the display information (for non-RDS station) Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Search for a station to listen—Auto Search. • Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Page 63: Searching For Fm Rds Programmes - Pty Search
Searching for FM RDS programme — PTY search Change the display information Storing your favorite programme types Activate PTY Search. You can store your favorite PTY codes into the Ÿ Select one of the PTY codes (programme number buttons. types). Select a PTY code (see left column).
Page 64 Activating/deactivating TA/PTY Standby Reception TA Standby Reception Indicator PTY Standby Reception Indicator Press to activate. See page 29. The unit temporarily will switch Lights up The unit temporarily will switch to Lights up to Traffic Announcement (TA), if your favorite PTY programme from available, from any source other than any source other than AM.
Page 65: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 17 – 20.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 66 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 67 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 69 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 18). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • For entering time/numbers, see the following. ⁄...
Page 70 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 71 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 72 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 73: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 74: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 13) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 75: Listening To The Dab Tuner
Listening to the DAB tuner Change the display information Select preset service. Select “DAB.” Ÿ Select the bands. Searching for an ensemble. • Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Page 76: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 77: Listening To The Other External Components
LINE IN plugs on the rear MD player, etc. Unit (see page 30 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [22] CD changer jack JVC DAB tuner, [23] (see page 30 of the Apple iPod, [24] ”EXT IN” setting) JVC D.
Page 78: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 79: Settings
Selecting a preset sound mode Preset frequency level settings: Adjust the level. Preset equalizing values Sound mode Repeat steps to adjust the USER other frequency bands. ROCK +03 +02 +01 +02 +01 Store the adjustments in the CLASSIC +01 +03 +01 respective mode.
Page 80: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 FAD* Adjust the front and rear speaker balance.
Page 81 Indication Item Setting, [reference page] DEMO • DEMO ON [Initial] : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [5]. • DEMO OFF : Cancels. CLOCK H 0 – 23 (1 – 12) : See also page 5 for setting.
Page 82 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [22], or an Apple iPod/a JVC D. player, External input [24]. • EXT IN : To use any other external component than the above, [25].
Page 83: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set ⁄ Select an option. To return to normal screen Menu Item Setting...
Page 84 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 85: Assigning Names To The Sources
Assigning names to the sources You can assign titles to CDs (both in the unit To erase the entire title and the CD changer). You can assign up to 30 In step Ÿ on the left... discs and each title up to 32 characters. •...
Page 86: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. connectors. If a disc does become dirty, wipe it To minimize this possibility, periodically wipe with a soft cloth in a straight line the connectors with a cotton swab or cloth from center to edge.
Page 87: More About This Unit
More about this unit • If you want to know more about RDS, visit General «http://www.rds.org.uk». Turning on the power • By pressing SRC on the unit, you can also Disc turn on the power. If the source is ready, General playback starts.
Page 88 • The file encoded in the interlaced scanning Playing MP3/WMA/WAV files mode may not be played back correctly. • The maximum number of characters for • This unit cannot playback the following files: folder and file names is 25 characters; 128 –...
Page 89 • Through the analog terminals (Speaker For iPod users: <http://www.jvc.co.jp/ out/LINE OUT/2nd AUDIO OUT): english/car/support/ks-pd100/index.html> 2-channel signal is emitted. When For D. player users: <http://www.jvc.co.jp/ playing a multi-channel encoded disc, english/car/support/ks-pd500/index.html> multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 32.) Title assignment •...
Page 90 On-screen guide icons During playback, the following guide icons may appear for a while on the monitor. DVD: Appears at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views Playback Pause : DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search...
Page 91 Language codes Code Language Code Language Code Language Code Language Afar Galician Macedonian Somali Abkhazian Guarani Malayalam Albanian Afrikaans Gujarati Mongolian Serbian Ameharic Hausa Moldavian Siswati Arabic Hindi Marathi Sesotho Assamese Croatian Malay (MAY) Sundanese Aymara Hungarian Maltese Swahili Azerbaijani Armenian Burmese Tamil...
Page 92: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 93 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 94 Symptom Remedy/Cause • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “CHECK” keeps flashing on the display. •...
Page 95 Symptom Remedy/Cause • The iPod or D. player does not turn on or does • Check the connecting cable and its connection. not work. • Change the battery. • Update the firmware version. • Buttons do not work as intended. The functions of the buttons have been changed.
Page 96: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 97 Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz: 16 Hz to 22 000 Hz DVD, fs=96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio:...
Page 98 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
Page 99 Verfügt Ihr Fahrzeug nicht über diese NEGATIVE. Si votre véhicule n’offre pas ce type negatieve aarding. Als uw auto niet is uitgerust is required, which can be purchased at JVC IN-CAR Anlage, ist ein Spannungsinverter erforderlich, der d’alimentation, il vous faut un convertisseur met een dergelijk systeem, is een spanningsomzetter ENTERTAINMENT dealers.
Page 100: Problemen Oplossen
Lijst van onderdelen die u bij connection Anschluß et raccordement installatie en aansluiting nodig If any item is missing, consult your JVC IN-CAR Falls ein Artikel fehlt, wenden Sie sich sofort an Si quelque chose manquait, consultez votre hebt ENTERTAINMENT dealer immediately.
Page 101 Sie Informationen hinsichtlich des Einbausatzes questions ou avez besoin d’information Neem bij vragen of voor meer bijzonderheden your JVC IN-CAR ENTERTAINMENT dealer or a brauchen, wenden Sie sich an ihren JVC sur des kits d’installation, consulter votre over inbouwpakketten contact op met uw JVC company supplying kits.
Page 102 ENGLISH DEUTSCH FRANÇAIS NEDERLANDS ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN If your car is equipped with the ISO For some VW/Audi or Opel (Vauxhall) automobile / Bei bestimmten VW-/Audi- order Opel- connector / Wenn Ihr Fahrzeug mit dem (Vauxhall-) Fahrzeugen / Pour certaine voiture VW/Audi ou Opel (Vauxhall) / Voor bepaalde ISO-Steckverbinder ausgestattet ist / Si votre VW/Audi en Opel (Vauxhall) auto’s...
Page 103 If your car is equipped with the steering wheel remote controller, you can operate this unit using the OE remote adapter (not supplied) Radio-Lenkrad-Fernbedienungsadaption (nicht mitgeliefert) controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Steering wheel remote input Adaptateur pour télécommande au volant (non fourni) Eingang für Lenkradfernbedienung...
Page 104 Connecting the external components / Anschließen der externen Komponenten / Connexion des appareils extérieurs / Verbinden van externe componenten ® CD changer, DAB tuner, Apple iPod®, or JVC D. player / CD-Wechsler, DAB-Tuner, Apple iPod oder JVC D. Player / Changeur de CD, tuner DAB, iPod Apple® ®...
Page 105 DVD/CD RECEIVER RECEPTEUR DVD/CD KD-DV6202/KD-DV6201 For canceling the display demonstration, see page 5. Pour annuler la démonstration des affichages, référez-vous à la page 5. For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0378-003A...
Page 106 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 107 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 108: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 109 Before operating the unit — Cancel the display demonstration and set the clock • See also page 29. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 110: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DAB* =DISC* = USB* = • Turn off the power [Hold]. CD-CH*/IPOD*/D.PLAYER* (or EXT IN) = LINE IN = • Attenuate the sound (if the power is on). (back to the beginning) •...
Page 111: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./Disc No./ Track information indicators Main display Chapter No./Channel No. (Time, menu, playback information) RDS indicators Dual Zone indicator Loudness indicator Track indicator Equalizer indicator Playback mode/item indicators Disc type indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 112 /JVC D. player MONITOR CONTROL operations: Monitor control buttons • 5 / ∞ • Used for a JVC monitor—KV-MR9010, ∞: Pauses/stops or resumes playback. KV-MH6510, KV-M706, or KV-M705. 5: Enters the main menu. (Now 5/∞/4 / ¢ work as the DVD/RECEIVER CONTROL menu selecting buttons.)*...
Page 113 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 15 and 16). • DVD-Video/DivX: Shows disc menu. •...
Page 114: Listening To The Radio
Listening to the radio Change the display information (for non-RDS station) Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Search for a station to listen—Auto Search. • Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Page 115: Searching For Fm Rds Programmes - Pty Search
Searching for FM RDS programme — PTY search Change the display information Storing your favorite programme types Activate PTY Search. You can store your favorite PTY codes into the Ÿ Select one of the PTY codes (programme number buttons. types). Select a PTY code (see left column).
Page 116 Activating/deactivating TA/PTY Standby Reception TA Standby Reception Indicator PTY Standby Reception Indicator Press to activate. See page 29. The unit temporarily will switch Lights up The unit temporarily will switch to Lights up to Traffic Announcement (TA), if your favorite PTY programme from available, from any source other than any source other than AM.
Page 117: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 17 – 20.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 118 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 119 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 121 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 18). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • For entering time/numbers, see the following. ⁄...
Page 122 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 123 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 124 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 125: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 126: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 13) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 127: Listening To The Dab Tuner
Listening to the DAB tuner Change the display information Select preset service. Select “DAB.” Ÿ Select the bands. Searching for an ensemble. • Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Page 128: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 129: Listening To The Other External Components
LINE IN plugs on the rear MD player, etc. Unit (see page 30 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [22] CD changer jack JVC DAB tuner, [23] (see page 30 of the Apple iPod, [24] ”EXT IN” setting) JVC D.
Page 130: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 131: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Adjust the level. Preset equalizing values Sound mode Repeat steps to adjust the USER other frequency bands. ROCK +03 +02 +01 +02 +01 Store the adjustments in the CLASSIC +01 +03 +01 respective mode.
Page 132: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 FAD* Adjust the front and rear speaker balance.
Page 133 Indication Item Setting, [reference page] DEMO • DEMO ON [Initial] : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [5]. • DEMO OFF : Cancels. CLOCK H 0 – 23 (1 – 12) : See also page 5 for setting.
Page 134 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [22], or an Apple iPod/a JVC D. player, External input [24]. • EXT IN : To use any other external component than the above, [25].
Page 135: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set ⁄ Select an option. To return to normal screen Menu Item Setting...
Page 136 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 137: Assigning Names To The Sources
Assigning names to the sources You can assign titles to CDs (both in the unit To erase the entire title and the CD changer). You can assign up to 30 In step Ÿ on the left... discs and each title up to 32 characters. •...
Page 138: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. connectors. If a disc does become dirty, wipe it To minimize this possibility, periodically wipe with a soft cloth in a straight line the connectors with a cotton swab or cloth from center to edge.
Page 139: More About This Unit
More about this unit • If you want to know more about RDS, visit General «http://www.rds.org.uk». Turning on the power • By pressing SRC on the unit, you can also Disc turn on the power. If the source is ready, General playback starts.
Page 140 • The file encoded in the interlaced scanning Playing MP3/WMA/WAV files mode may not be played back correctly. • The maximum number of characters for • This unit cannot playback the following files: folder and file names is 25 characters; 128 –...
Page 141 • Through the analog terminals (Speaker For iPod users: <http://www.jvc.co.jp/ out/LINE OUT/2nd AUDIO OUT): english/car/support/ks-pd100/index.html> 2-channel signal is emitted. When For D. player users: <http://www.jvc.co.jp/ playing a multi-channel encoded disc, english/car/support/ks-pd500/index.html> multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 32.) •...
Page 142 On-screen guide icons During playback, the following guide icons may appear for a while on the monitor. DVD: Appears at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views Playback Pause : DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search...
Page 143 Language codes Code Language Code Language Code Language Code Language Afar Galician Macedonian Somali Abkhazian Guarani Malayalam Albanian Afrikaans Gujarati Mongolian Serbian Ameharic Hausa Moldavian Siswati Arabic Hindi Marathi Sesotho Assamese Croatian Malay (MAY) Sundanese Aymara Hungarian Maltese Swahili Azerbaijani Armenian Burmese Tamil...
Page 144: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 145 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 146 Symptom Remedy/Cause • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “CHECK” keeps flashing on the display. •...
Page 147 Symptom Remedy/Cause • The iPod or D. player does not turn on or does • Check the connecting cable and its connection. not work. • Change the battery. • Update the firmware version. • Buttons do not work as intended. The functions of the buttons have been changed.
Page 148: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 149 Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz: 16 Hz to 22 000 Hz DVD, fs=96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio:...
Page 150 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil EN, FR 0106DTSMDTJEIN © 2006 Victor Company of Japan, Limited...
Page 151 Notes: Remarques: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR • Remplacer le fusible par un de la valeur précisée. Si le fusible saute souvent, consulter votre revendeur ENTERTAINMENT dealer.
Page 152 L’illustration suivante est un exemple d’installation typique. Si vous avez des questions ou avez besoin regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying d’information sur des kits d’installation, consulter votre revendeur d’autoradios JVC ou une compagnie kits.
Page 153 ENGLISH FRANÇAIS ELECTRICAL CONNECTIONS RACCORDEMENTS ELECTRIQUES If your car is equipped with the ISO connector / Si For some VW/Audi or Opel (Vauxhall) automobile / Pour certaine voiture VW/Audi ou votre voiture est équippée d’un connecteur ISO Opel (Vauxhall) You may need to modify the wiring of the supplied power cord as illustrated. •...
Page 154 Connecting the external components / Connexion des appareils extérieurs CD changer, DAB tuner, Apple iPod®, or JVC D. player / Changeur de CD, tuner DAB, iPod‚ Apple® ou lecteur D. JVC • Set “CHANGER” for the external input setting (See page 30 of the INSTRUCTIONS.) / Choisissez “CHANGER” pour le réglage de l’entrée extérieure (Voir page 30 du MANUAL D’INSTRUCTIONS.) •...
Page 155 DVD/CD RECEIVER KD-DV7206/KD-DV7205 KD-DV7206/KD-DV7205 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0375-001A...
Page 156 DVD/CD RECEIVER KD-DV7206/KD-DV7205 ALAT PENERIMA DVD/CD KD-DV7206/KD-DV7205 For canceling the display demonstration, see page 5. Untuk membatalkan tampilan demonstrasi, lihat halaman 5. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah. INSTRUCTIONS BUKU PETUNJUK GET0375-003A [UN]...
Page 157 DVD/CD RECEIVER KD-DV7206/KD-DV7205 KD-DV7206/KD-DV7205 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0375-004A [UT]...
Page 158 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 159 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 160: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 161 Before operating the unit — Cancel the display demonstration and set the clock • See also page 26. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 162: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DISC* = USB* = CD-CH*/IPOD*/ • Turn off the power [Hold]. D.PLAYER* (or EXT IN) = LINE IN =(back to the • Attenuate the sound (if the power is on). beginning) •...
Page 163: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./ Main display Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Equalizer indicator Playback mode/item indicators Disc type indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 164 MONITOR CONTROL menu selecting buttons.)* • 4 / ¢ (in menu selecting mode) Monitor control buttons • Used for a JVC monitor—KV-MR9010, – Selects an item if pressed briefly. (Then, press ∞ to confirm the KV-MH6510, KV-M706, or KV-M705. selection.) DVD/RECEIVER CONTROL –...
Page 165 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
Page 166: Listening To The Radio
Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 30. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Page 167: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 168 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 169 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 171 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
Page 172 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 173 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 174 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 175: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 176: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 177: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 178: Listening To The Other External Components
MD player, etc. MD player, etc. Unit (see page 26 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [20] CD changer jack Apple iPod, [21] (see page 26 of the ”EXT IN” setting) JVC D. player, [21]...
Page 179: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 180: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 +01 +02 +01 CLASSIC +01 +03 +01 POPS +01 +02 HIP HOP...
Page 181: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 Adjust the front and rear speaker balance.
Page 182 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], or an Apple iPod/a JVC D. player, External input [21]. • EXT IN : To use any other external component than the above, [22].
Page 183 Indication Item Setting, [reference page] TAG DISP • TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks. Tag display • TAG OFF : Cancels. NTSC/PAL* • PAL [Initial] : Select this if your monitor is of the PAL color system. Video format •...
Page 184: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
Page 185 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 186: Assigning Names To The Sources
Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
Page 187: Maintenance
Maintenance To keep discs clean How to clean the connectors A dirty disc may not play correctly. Frequent detachment will deteriorate the If a disc does become dirty, wipe it connectors. with a soft cloth in a straight line To minimize this possibility, periodically wipe from center to edge.
Page 188: More About This Unit
More about this unit Playing Recordable/Rewritable discs General • This unit can recognize a total of 3 500 files Turning on the power and 250 folders (a maximum of 999 files per • By pressing SRC on the unit, you can also folder).
Page 189 When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html> Continued on the next page...
Page 190 Title assignment On-screen guide icons • If you try to assign titles to more than 30 During playback, the following guide icons station frequencies or 30 CDs, “NAMEFULL” may appear for a while on the monitor. appears. Delete unwanted titles before assignment.
Page 191 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 29). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
Page 192 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish Cambodian (Afan) Oromo Sundanese Afrikaans Fiji Kannada Oriya Swahili Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish Telugu Assamese Irish Kurdish Pashto, Pushto...
Page 193: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 194 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 195 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
Page 196: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 197 DivX: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz MPEG Video: Video: Max.
Page 198 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, CT © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...
Page 199 • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio 50 W dealer.
Page 200 Parts list for installation and connection If any item is missing, consult your JVC car audio dealer immediately. A / B Hard case/Control panel Sleeve Trim plate Power cord Crimp connector Washer (ø5) Lock nut (M5) Mounting bolt (M5 × 20 mm) (ø5)
Page 201 The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Page 202 ENGLISH ELECTRICAL CONNECTIONS Typical connections / Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
Page 203 Connecting the parking brake wire / When installing the monitor in a location where it can be seen by the driver Connect the parking brake wire to the parking brake system built in the car. Parking brake wire (light green) Parking brake To metallic body or chassis of the car Parking brake switch (inside the car)
Page 204 Failure to do so may cause damage to the unit. Connecting the external components / CD changer, Apple iPod®, or JVC D. player / CD Apple iPod® JVC D. player • Set “CHANGER” for the external input setting (See page 26 of the INSTRUCTIONS.) / “CHANGER”...
Page 205 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 206 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 207: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 208 Before operating the unit — Cancel the display demonstration and set the clock • See also page 26. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 209: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DISC* = USB* = CD-CH*/IPOD*/ • Turn off the power [Hold]. D.PLAYER* (or EXT IN) = LINE IN =(back to the • Attenuate the sound (if the power is on). beginning) •...
Page 210: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./ Main display Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Playback mode/item indicators Disc type indicators Equalizer indicator (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 211 MONITOR CONTROL menu selecting buttons.)* • 4 / ¢ (in menu selecting mode) Monitor control buttons • Used for a JVC monitor—KV-MR9010, – Selects an item if pressed briefly. (Then, press ∞ to confirm the KV-MH6510, KV-M706, or KV-M705. selection.) DVD/RECEIVER CONTROL –...
Page 212 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
Page 213: Listening To The Radio
Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 30. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Page 214: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 215 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 216 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 218 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
Page 219 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 220 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 221 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 222: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 223: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 224: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 225: Listening To The Other External Components
MD player, etc. MD player, etc. Unit (see page 26 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [20] CD changer jack Apple iPod, [21] (see page 26 of the ”EXT IN” setting) JVC D. player, [21]...
Page 226: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 227: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 +01 +02 +01 CLASSIC +01 +03 +01 POPS +01 +02 HIP HOP...
Page 228: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 Adjust the front and rear speaker balance.
Page 229 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], or an Apple iPod/a JVC D. player, External input [21]. • EXT IN : To use any other external component than the above, [22].
Page 230 Indication Item Setting, [reference page] TAG DISP • TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks. Tag display • TAG OFF : Cancels. NTSC/PAL* • PAL [Initial] : Select this if your monitor is of the PAL color system. Video format •...
Page 231: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
Page 232 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 233: Assigning Names To The Sources
Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
Page 234: Maintenance
Maintenance To keep discs clean How to clean the connectors A dirty disc may not play correctly. Frequent detachment will deteriorate the If a disc does become dirty, wipe it connectors. with a soft cloth in a straight line To minimize this possibility, periodically wipe from center to edge.
Page 235: More About This Unit
More about this unit Playing Recordable/Rewritable discs General • This unit can recognize a total of 3 500 files Turning on the power and 250 folders (a maximum of 999 files per • By pressing SRC on the unit, you can also folder).
Page 236 When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html> Continued on the next page...
Page 237 Title assignment On-screen guide icons • If you try to assign titles to more than 30 During playback, the following guide icons station frequencies or 30 CDs, “NAMEFULL” may appear for a while on the monitor. appears. Delete unwanted titles before assignment.
Page 238 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 29). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
Page 239 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish Cambodian (Afan) Oromo Sundanese Afrikaans Fiji Kannada Oriya Swahili Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish Telugu Assamese Irish Kurdish Pashto, Pushto...
Page 240: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 241 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 242 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
Page 243: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 244 DivX: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz MPEG Video: Video: Max.
Page 245 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda EN, IN © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...
Page 246 • Pastikan untuk mentanahkan alat penerima ini ke casis mobil kembali setelah pemasangan. Notes: Catatan: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio • Ganti sekring dengan voltase yang sudah ditetapkan. Jika sekring sering meledak, konsultasikan pada dealer.
Page 247 Parts list for installation and connection Daftar bagian-bagian untuk pemasangan dan penyambungan If any item is missing, consult your JVC car audio dealer immediately. Jika ada item yang hilang, segera hubungi dealer audio mobil JVC anda. A / B Hard case/Control panel...
Page 248 The following illustration shows a typical installation. If you have any questions or require information Ilustrasi berikut menunjukkan sebuah tipe pemasangan. Jika anda mempunyai suatu pertanyaan atau regarding installation kits, consult your JVC car audio dealer or a company supplying kits. informasi yang diperlukan mengenai alat-alat pemasangan, konsultasikan pada penyalur audio mobil JVC •...
Page 249 ENGLISH INDONESIA ELECTRICAL CONNECTIONS SAMBUNGAN-SAMBUNGAN LISTRIK Typical connections / Ciri khas sambungan-sambungan Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious Sebelum penyambungan: Cek perkabelan dalam mobil dengan hati-hati. Penyambungan yang damage to this unit. tidak benar mungkin menyebabkan kerusakan serius pada alat penerima.
Page 250 Connecting the parking brake wire / Menyambung kabel rem parkir When installing the monitor in a location where it can be seen by the driver Ketika memasang monitor pada tempat yang dapat dilihat oleh pengemudi Connect the parking brake wire to the parking brake system built in the car. Sambungkan kabel rem parkir ke sistem rem parkir yang terpasang tetap dalam mobil.
Page 251 Connecting the external components / Menyambung komponen eksternal ® CD changer, Apple iPod®, or JVC D. player / CD changer, Apple iPod atau JVC D. player • Set “CHANGER” for the external input setting (See page 26 of the INSTRUCTIONS.) / Aturlah “CHANGER” untuk pengaturan input eksternal (Lihat halaman 26 dari BUKU PETUNJUK.) You can connect these components as illustrated below.
Page 252 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 253 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 254: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 255 Before operating the unit — Cancel the display demonstration and set the clock • See also page 26. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 256: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DISC* = USB* = CD-CH*/IPOD*/ • Turn off the power [Hold]. D.PLAYER* (or EXT IN) = LINE IN =(back to the • Attenuate the sound (if the power is on). beginning) •...
Page 257: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./ Main display Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Equalizer indicator Playback mode/item indicators Disc type indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 258 MONITOR CONTROL menu selecting buttons.)* • 4 / ¢ (in menu selecting mode) Monitor control buttons • Used for a JVC monitor—KV-MR9010, – Selects an item if pressed briefly. (Then, press ∞ to confirm the KV-MH6510, KV-M706, or KV-M705. selection.) DVD/RECEIVER CONTROL –...
Page 259 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
Page 260: Listening To The Radio
Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 30. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Page 261: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 262 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 263 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 265 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
Page 266 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 267 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 268 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 269: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 270: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 271: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 272: Listening To The Other External Components
MD player, etc. MD player, etc. Unit (see page 26 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [20] CD changer jack Apple iPod, [21] (see page 26 of the ”EXT IN” setting) JVC D. player, [21]...
Page 273: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 274: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 +01 +02 +01 CLASSIC +01 +03 +01 POPS +01 +02 HIP HOP...
Page 275: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 Adjust the front and rear speaker balance.
Page 276 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], or an Apple iPod/a JVC D. player, External input [21]. • EXT IN : To use any other external component than the above, [22].
Page 277 Indication Item Setting, [reference page] TAG DISP • TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks. Tag display • TAG OFF : Cancels. NTSC/PAL* • PAL [Initial] : Select this if your monitor is of the PAL color system. Video format •...
Page 278: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
Page 279 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 280: Assigning Names To The Sources
Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
Page 281: Maintenance
Maintenance To keep discs clean How to clean the connectors A dirty disc may not play correctly. Frequent detachment will deteriorate the If a disc does become dirty, wipe it connectors. with a soft cloth in a straight line To minimize this possibility, periodically wipe from center to edge.
Page 282: More About This Unit
More about this unit Playing Recordable/Rewritable discs General • This unit can recognize a total of 3 500 files Turning on the power and 250 folders (a maximum of 999 files per • By pressing SRC on the unit, you can also folder).
Page 283 When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html> Continued on the next page...
Page 284 Title assignment On-screen guide icons • If you try to assign titles to more than 30 During playback, the following guide icons station frequencies or 30 CDs, “NAMEFULL” may appear for a while on the monitor. appears. Delete unwanted titles before assignment.
Page 285 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 29). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
Page 286 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish Cambodian (Afan) Oromo Sundanese Afrikaans Fiji Kannada Oriya Swahili Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish Telugu Assamese Irish Kurdish Pashto, Pushto...
Page 287: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 288 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 289 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
Page 290: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 291 DivX: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz MPEG Video: Video: Max.
Page 292 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, CT © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...
Page 293 • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio 50 W dealer.
Page 294 Parts list for installation and connection If any item is missing, consult your JVC car audio dealer immediately. A / B Hard case/Control panel Sleeve Trim plate Power cord Crimp connector Washer (ø5) Lock nut (M5) Mounting bolt (M5 × 20 mm) (ø5)
Page 295 The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Page 296 ENGLISH ELECTRICAL CONNECTIONS Typical connections / Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
Page 297 Connecting the parking brake wire / When installing the monitor in a location where it can be seen by the driver Connect the parking brake wire to the parking brake system built in the car. Parking brake wire (light green) Parking brake To metallic body or chassis of the car Parking brake switch (inside the car)
Page 298 Failure to do so may cause damage to the unit. Connecting the external components / CD changer, Apple iPod®, or JVC D. player / CD Apple iPod® JVC D. player • Set “CHANGER” for the external input setting (See page 26 of the INSTRUCTIONS.) / “CHANGER”...
Page 299 DVD/CD RECEIVER KD-DV7206/KD-DV7205 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0375-005A...
Page 300 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 301 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 302: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 303 Before operating the unit — Cancel the display demonstration and set the clock • See also page 26. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 304: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DISC* = USB* = CD-CH*/IPOD*/ • Turn off the power [Hold]. D.PLAYER* (or EXT IN) = LINE IN =(back to the • Attenuate the sound (if the power is on). beginning) •...
Page 305: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./ Main display Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Disc type indicators Equalizer indicator Playback mode/item indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 306 MONITOR CONTROL menu selecting buttons.)* • 4 / ¢ (in menu selecting mode) Monitor control buttons • Used for a JVC monitor—KV-MR9010, – Selects an item if pressed briefly. (Then, press ∞ to confirm the KV-MH6510, KV-M706, or KV-M705. selection.) DVD/RECEIVER CONTROL –...
Page 307 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
Page 308: Listening To The Radio
Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 30. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Page 309: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 310 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 311 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 313 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
Page 314 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 315 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 316 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 317: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 318: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 319: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 320 MD player, etc. MD player, etc. Unit (see page 26 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [20] CD changer jack Apple iPod, [21] (see page 26 of the ”EXT IN” setting) JVC D. player, [21]...
Page 321: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 322: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 +01 +02 +01 CLASSIC +01 +03 +01 POPS +01 +02 HIP HOP...
Page 323: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 Adjust the front and rear speaker balance.
Page 324 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], or an Apple iPod/a JVC D. player, External input [21]. • EXT IN : To use any other external component than the above, [22].
Page 325 Indication Item Setting, [reference page] TAG DISP • TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks. Tag display • TAG OFF : Cancels. NTSC/PAL* • PAL [Initial] : Select this if your monitor is of the PAL color system. Video format •...
Page 326: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
Page 327 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 328: Assigning Names To The Sources
Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
Page 329: Maintenance
Maintenance To keep discs clean How to clean the connectors A dirty disc may not play correctly. Frequent detachment will deteriorate the If a disc does become dirty, wipe it connectors. with a soft cloth in a straight line To minimize this possibility, periodically wipe from center to edge.
Page 330: More About This Unit
More about this unit Playing Recordable/Rewritable discs General • This unit can recognize a total of 3 500 files Turning on the power and 250 folders (a maximum of 999 files per • By pressing SRC on the unit, you can also folder).
Page 331 When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html> Continued on the next page...
Page 332 Title assignment On-screen guide icons • If you try to assign titles to more than 30 During playback, the following guide icons station frequencies or 30 CDs, “NAMEFULL” may appear for a while on the monitor. appears. Delete unwanted titles before assignment.
Page 333 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 29). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
Page 334 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish Cambodian (Afan) Oromo Sundanese Afrikaans Fiji Kannada Oriya Swahili Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish Telugu Assamese Irish Kurdish Pashto, Pushto...
Page 335: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 336 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 337 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
Page 338: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 339 DivX: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz MPEG Video: Video: Max.
Page 340 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...
Page 341 Trim plate Power cord • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. • It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω...
Page 342 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Page 343 ELECTRICAL CONNECTIONS Typical connections Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
Page 344 Failure to do so may cause damage to the unit. Connecting the external components CD changer, Apple iPod®, or JVC D. player • Set “CHANGER” for the external input setting (See page 26 of the INSTRUCTIONS.) You can connect these components as illustrated below. The iPod* or D.
Page 345 Срок службы (годности), кроме срока хранения дополнительных космети ческих материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства JVC, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.
Page 346 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 347 WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
Page 348: Introduction
Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
Page 349 Before operating the unit — Cancel the display demonstration and set the clock • See also page 29. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
Page 350: Basic Operations
Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DAB* =DISC* = USB* = • Turn off the power [Hold]. CD-CH*/IPOD*/D.PLAYER* (or EXT IN) = LINE IN = • Attenuate the sound (if the power is on). (back to the beginning) •...
Page 351: Remote Controller (Rm-Rk230)
Display window Source display/Preset No./ Track No./Folder No./Disc No./ Track information indicators Main display Chapter No./Channel No. (Time, menu, playback information) RDS indicators Dual Zone indicator Loudness indicator Track indicator Disc type indicators Equalizer indicator Playback mode/item indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
Page 352 /JVC D. player MONITOR CONTROL operations: Monitor control buttons • 5 / ∞ • Used for a JVC monitor—KV-MR9010 ∞: Pauses/stops or resumes playback. or KV-MH6510. 5: Enters the main menu. (Now 5/∞/4 / ¢ work as the DVD/RECEIVER CONTROL menu selecting buttons.)*...
Page 353 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 15 and 16). • DVD-Video/DivX: Shows disc menu. •...
Page 354: Listening To The Radio
Listening to the radio Change the display information (for non-RDS station) Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Search for a station to listen—Auto Note: Search. FM1 and FM2: 87.5 MHz –...
Page 355: Pty Search
Searching for FM RDS programme — PTY search Change the display information Storing your favorite programme types Activate PTY Search. You can store your favorite PTY codes into the Ÿ Select one of the PTY codes (programme number buttons. types). Select a PTY code (see left column).
Page 356 Activating/deactivating TA/PTY Standby Reception TA Standby Reception Indicator PTY Standby Reception Indicator Press to activate. See page 29. The unit temporarily will switch Lights up The unit temporarily will switch to Lights up to Traffic Announcement (TA), if your favorite PTY programme from available, from any source other than any source other than AM.
Page 357: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 17 – 20.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
Page 358 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
Page 359 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
Page 361 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 18). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • For entering time/numbers, see the following. ⁄...
Page 362 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
Page 363 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
Page 364 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
Page 365: External Devices
Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
Page 366: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 13) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
Page 367: Listening To The Dab Tuner
Listening to the DAB tuner Change the display information Select preset service. Select “DAB.” Ÿ Select the bands. Searching for an ensemble. • Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Page 368: Listening To The Ipod®/D. Player
Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
Page 369: Listening To The Other External Components
LINE IN plugs on the rear MD player, etc. Unit (see page 30 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [22] CD changer jack JVC DAB tuner, [23] (see page 30 of the Apple iPod, [24] ”EXT IN” setting) JVC D.
Page 370: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
Page 371: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Adjust the level. Preset equalizing values Sound mode Repeat steps to adjust the USER other frequency bands. ROCK +03 +02 +01 +02 +01 Store the adjustments in the CLASSIC +01 +03 +01 respective mode.
Page 372: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 FAD* Adjust the front and rear speaker balance.
Page 373 Indication Item Setting, [reference page] DEMO • DEMO ON [Initial] : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [5]. • DEMO OFF : Cancels. CLOCK H 0 – 23 (1 – 12) : See also page 5 for setting.
Page 374 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [22], or an Apple iPod/a JVC D. player, External input [24]. • EXT IN : To use any other external component than the above, [25].
Page 375: Disc Setup Menu
Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set ⁄ Select an option. To return to normal screen Menu Item Setting...
Page 376 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
Page 377: Assigning Names To The Sources
Assigning names to the sources You can assign titles to CDs (both in the unit To erase the entire title and the CD changer). You can assign up to 30 In step Ÿ on the left... discs and each title up to 32 characters. •...
Page 378: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. connectors. If a disc does become dirty, wipe it To minimize this possibility, periodically wipe with a soft cloth in a straight line the connectors with a cotton swab or cloth from center to edge.
Page 379: More About This Unit
More about this unit • If you want to know more about RDS, visit General «http://www.rds.org.uk». Turning on the power • By pressing SRC on the unit, you can also Disc turn on the power. If the source is ready, General playback starts.
Page 380 • The file encoded in the interlaced scanning Playing MP3/WMA/WAV files mode may not be played back correctly. • The maximum number of characters for • This unit cannot playback the following files: folder and file names is 25 characters; 128 –...
Page 381 • Through the analog terminals (Speaker For iPod users: <http://www.jvc.co.jp/ out/LINE OUT/2nd AUDIO OUT): english/car/support/ks-pd100/index.html> 2-channel signal is emitted. When For D. player users: <http://www.jvc.co.jp/ playing a multi-channel encoded disc, english/car/support/ks-pd500/index.html> multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 32.) •...
Page 382 On-screen guide icons During playback, the following guide icons may appear for a while on the monitor. DVD: Appears at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views Playback Pause : DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search...
Page 383 Language codes Code Language Code Language Code Language Code Language Afar Galician Macedonian Somali Abkhazian Guarani Malayalam Albanian Afrikaans Gujarati Mongolian Serbian Ameharic Hausa Moldavian Siswati Arabic Hindi Marathi Sesotho Assamese Croatian Malay (MAY) Sundanese Aymara Hungarian Maltese Swahili Azerbaijani Armenian Burmese Tamil...
Page 384: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 385 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
Page 386 Symptom Remedy/Cause • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “CHECK” keeps flashing on the display. •...
Page 387 Symptom Remedy/Cause • The iPod or D. player does not turn on or does • Check the connecting cable and its connection. not work. • Change the battery. • Update the firmware version. • Buttons do not work as intended. The functions of the buttons have been changed.
Page 388: Specifications
Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
Page 389 Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz: 16 Hz to 22 000 Hz DVD, fs=96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio:...
Page 390 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше устройство Для получения информации о перезагрузке Вашего устройства обратитесь на соответствующую страницу EN, RU 0106DTSMDTJEIN © 2006 Victor Company of Japan, Limited...
Page 391 • После установки обязательно заземлите данное устройство на шасси автомобиля. Notes: Примечания: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR • Заменяйте предохранитель другим предохранителем указанного класса. Если предохранитель ENTERTAINMENT dealer.
Page 392 The following illustration shows a typical installation. If you have any questions or require information касающиеся установки, обратитесь к Вашему дилеру автомобилнего специалиста JVC или в regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying компанию, поставляющую соответствующие принадлежности.
Page 393 ENGLISH РУССКИЙ ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ ELECTRICAL CONNECTIONS If your car is equipped with the ISO For some VW/Audi or Opel (Vauxhall) automobile / Для некоторых автомобилей VW/Audi или Opel (Vauxhall) connector / Если автомобиль оснащен You may need to modify the wiring of the supplied power cord as illustrated. •...
Page 394 Connecting other external components / Подключение внешних устройств ® CD changer, DAB tuner, Apple iPod®, or JVC D. player / Устройство автоматической смены компакт-дисков, тюнер DAB, Apple iPod или проигрыватель JVC D. • Set “CHANGER” for the external input setting (See page 30 of the INSTRUCTIONS.) / Установите для внешнего входа значение “CHANGER” (Cм. ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ на стр. 30.) CAUTION / ПРЕДОСТЕРЕЖЕНИЕ:...

This manual is also suitable for:

Kd-dv6200

JVC KD-ADV6270 Instructions Manual

Quick Links

Chapters

Troubleshooting

Related Manuals for JVC KD-ADV6270

Summary of Contents for JVC KD-ADV6270