Table of Contents
Advertisement
Operating Recommendation
Here are a few recommendations that you should follow when using your air conditioner.
Topic
Heating performances
Warm air circulation
Frost
High indoor and outdoor
temperatures
Power failure
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air
conditioner can be used.
Mode
Cooling
Heating
If the air conditioner is used at...
Higher temperature
Lower temperature
Higher humidity levels
8
E-
Recommendation
The heat pump inside the air conditioner absorbs heat from outside air
and brings it indoors. If the temperature of the outside air drops, the air
conditioner will heat less. If you find that the room is not warm enough,
use an additional heating appliance.
The air conditioner circulates warm air to heat your room; as a result,
some time will be required after starting the air conditioner to warm the
entire room. If necessary, set the air conditioner going a short time before
you wish to use the room.
When outside temperatures are low and humidity is high, frost may form
in the unit's condensor when heating with your air conditioner.
If this happens:
The unit stops heating
The air flow blades stop swinging
The Deice mode is triggered automatically for about five minutes
No intervention is required from you; after about five
minutes, the air conditioner starts operating again normally.
If both the indoor and outdoor temperatures are high and you select the
Heat mode, the fan and compressor in the unit may stop at times.
This is normal; simply wait until the air conditioner switches on again.
If a power failure occurs when the air conditioner is operating, the unit is
switched off. When the power returns, the air conditioner starts up again
automatically
Indoor
Temperature
21°C to 32°C approx.
28°C or less
Outdoor
Temperature
21°C to 43°C approx.
0°C to 21°C approx.
Then...
The automatic protection feature may be triggered
and the air conditioner stopped.
A water leakage or some other malfunction may happen
if the heat exchanger freezes.
Water may condense on and drip from the surface of the unit
if it is used for long periods.
Indoor Humidity
80% or less
-
Hide quick links:
Advertisement
Table of Contents
