Menu List - Sony HDCU2000 Operation Manual
Hd camera control unit, (3g/hd sdi output expansion unit/ sd encoder unit/ multi interface unit)
Hide thumbs
Also See for HDCU2000:
- Operation manual (36 pages) ,
- Maintenance manual (393 pages) ,
- Manual (30 pages)
Table of Contents
Advertisement
Menu List
Note
The following conventions are used in the menu list table.
Settings column values (e.g. ON, OFF, 0): Default settings
Execute via ENTER: Press the CONTROL knob or move the CANCEL/ENTER lever to the ENTER position to execute.
SYSTEM OPERATION menu
SYSTEM OPERATION
Page name
Page No.
<OUTPUT SELECT>
S01
<GENLOCK PHASE>
S02
34
Setup Menu
Item
Settings
OUTPUT
CAMERA, BAR, TEST1, TEST2
PIX
ENC, R, G, B, R&G, G&B, R&B,
RGB
WFM
ENC, R, G, B, SEQ, R&G, G&B,
R&B, RGB
CONTROL
(REMOTE), (LOCAL)
REFERENCE
(NONE), (EXT IN)
GENLOCK
HD, SD
(OK), (NG)
External reference signal format
H STEP
When GENLOCK mode is HD:
–3.01 to 3.45 µsec 0.00
When GENLOCK mode is SD:
–8.29 to 9.48 µsec 0.00
COARSE
–99.9 to 99.9 0
V PHASE
0 to 7
SUB-REF
(NONE), (EXT IN)
Note
(UNKNOWN), (Frame Gate), (HD),
(SD)
Displayed only
when HKCU1003
is connected
Description
Selects the output signal.
TEST1 and TEST2 are not selectable if there is no
communication with the camera.
Selects the PIX connector output signal.
Selects the WFM connector output signal.
Displays the status of the reference signal input.
This unit's GEN LOCK mode: displays the lock
status and format.
HD: HD
SD: SD
Sets the lock status of the external reference signal.
(OK): Locked
(NG): Unlocked
Displayed only when a reference signal is present.
Horizontal phase (STEP)
Displays the sub-reference signal format.
Horizontal phase
Displays the sub-reference signal format.
Vertical phase (line)
Displays the sub-reference signal format.
Displayed only when a sub-reference signal is
present.
Sub-reference signal format display
Hide quick links:
Advertisement
Table of Contents
