Table of Contents
Advertisement
03
Multi-zone connection using the HDMI terminal and speaker terminals
(HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup
on
page 86
.
! You must select HDZONE in
Speaker system setting (page 110
1
Connect the speaker to the surround back speaker terminal.
Which speaker terminal is connected defers depending on the Speaker System
see
Installing your speaker system
on
page 25
.
The following figure shows the connection of the surround back speaker terminal.
2
Connect a TV monitor to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Sub zone (HDZONE)
2
HDMI IN
L
R
1
(page 114
).
) to use this setup.
(page 110
) setting. For details,
Main zone
HDMI OUT
2
1
HDMI OUT
HDZONE/MAIN
MAIN
SELECTABLE
ARC CONTROL
2
1
SURROUND BACK
R
(Single)
L
HDZONE/MAIN
MAIN
SELECTABLE
ARC CONTROL
HDZONE / BI-AMP
SURROUND BACK
R
HDZONE / BI-AMP
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
HDMI
NETWORK
1
to LAN port
NAS
L
(Single)
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! When connecting the wireless LAN, please use with the wireless LAN antenna upright.
! The range of movement of the wireless LAN antenna is as indicated in the diagram below. There is danger that
you may break it if unnecessary force is applied.
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
35
Connecting your equipment (In case of VSX-90)
NETWORK
Internet
Modem
Computer
LAN
3
2
1
WAN
LAN cable (sold separately)
to LAN port
Setting network connection
Wireless LAN antenna
1
Router
on
page 55
.
- Quick Links:
- Connecting Your Equipment
Hide quick links:
Advertisement
Chapters
Table of Contents
